To be the Chief Evangelist
Ender-3 Pro Series 3D Printer
To make Top-quality 3D printer
This guide is for the Ender-3 Pro Series of 3D printers.
Select the correct input voltage to match your local mains (230V or 115V)
Because of software/hardware upgrades and model differences, new revisions may not be listed in this guide.
Please plug the power cord into a three-hole power jack.
Detailed instructions for use are available on the SD card.
V.1.0
Notes
1.Do not use the Printer in any way other than described herein to avoid personal injury or property damage.
2.Do not place the Printer near flammables, explosives or heat sources. It is best to place it in a wellventilated, low-dust environment.
3.Do not expose the Printer to violent vibration or any unstable environment. This will cause poor print quality.
4.The filaments recommended by the manufacturer are preferred as to avoid clogging in the hot end and/or Printer damage.
5.Do not use any other power cable than the one supplied. Use a grounded three-prong power outlet.
6.Do not touch the nozzle or hot bed during printing. Keep hands away from machine while in use to avoid burns or personal injury.
7.Do not wear gloves or loose clothing when operating the Printer. These loose articles can become caught in moving parts and cause personal injury or Printer damage.
8.Clean off filament from the nozzle tip with the provided pliers before the nozzle cools. Do not touch the nozzle directly. This can cause personal injury.
9.Clean the Printer frequently. With the machine powered off, clean the printer body with a dry cloth to remove dust, adhered printing materials and foreign objects on guide rails. Use glass cleaner or isopropyl Alcohol to clean the print surface before every print for consistent results.
10.Children under 10 years of age should not use the Printer without supervision.
Contents
1.Introduction ...………………………............1 5. Software Installation ..……………… 9
2.Screen Information........……………….........2 6. Preparing to Print……………………10
3. |
Loading Filament...................................... |
3 |
7. |
Trouble-shooting ……………………11 |
4. |
B e d L e v e l i n g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
4 |
8. |
Circuit Wiring Diagram …………………12 |
Preface
Dear consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer. Our 3D team is always ready to provide you with assistance. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in the following ways:
1.View the accompanied instructions and videos on the SD card.
2.Visit our official website at www.creality3d.cn You will find relevant software/hardware information, contact details and operation and maintenance instructions on the website.
1. Introduction
|
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
16 |
|
|
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 |
|
|
|
|
|
15 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
|
11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
2 |
|
3 |
|
4 |
|
|
|
12 |
13 |
|
14 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
1. |
SD Slot and USB Port |
5. |
Display Screen |
9. |
Power |
13. |
Z Stepper |
||||||||||
2. |
Control Box |
|
|
6. |
Nozzle Assembly |
10. |
Y Limit Switch |
14. |
Z Limit Switch |
||||||||
3. |
Print Surface |
|
|
7. |
Spool Holder |
11. |
Y Stepper |
15. |
X Limit Switch |
||||||||
4. |
Control Knob |
|
|
8. |
Extruder (E) Stepper |
12. |
Coupling |
16. |
X Stepper |
||||||||
1
Loading...