Craftsman 536.7975 User Manual

OWNER°S

UAL

Caution:

Read and Follow Al! Safety Rules

and Rnstructions

Before Operating

This Equipment

32.8 cc 2oCYCLE 10 UNCH DmAMETER TINES MBN9"rBLLEF_/CUL'NVATOR

o Assembly

• Operation

o Customer Responsibilities

- Service and Adjustments o Repair Parts

SEARS, ROEBUCK AND CO., Hoffman Estates 60179 U.S.A.

SAFETY RULES

IT CANNOT CONTACT SPARK PLUG TO PREVENT ACCIDENTAL STARTING

CAUTION: ALWAYS DISCONNECTSPARK PLUG WIRE AND PLACE WIRE WHERE A WHEN SETTING-UP, TRANSPORTING, ADJUSTING OR MAKING REPAIRS

iMPORTANT

SAFETY STANDARDS REQUIRE OPERATOR PRESENCE CONTROLS TO MfNIMIZETHE RISK OF INJURY YOUR MINI TILLER/CULTIVATOR 1SEQUIPPED WITH SUCH CONTROLS DO NOT ATTEMPT TO DEFEATTHE FUNCTION OF THE OPERATOR PRESENCE CONTROL UNDER ANY CIRCUMSTANCES

BEFORE USE

Read the owner's manual carefuJty Be thoroughly famiF tar with the controts and the proper use of the mini tiller/

cultivator ..Know how to stop the mini tilter/cultivator and

disengage the controls quickly. Do not operate the mini tiller/cultivator without wearing

adequate outer garments. Wear footwear that will im- prove footing on slippery surfaces

@ Keep the area of operation clear of all persons, particu-

larly small children and pets

@ Thoroughly inspect the area where the mini rifler!cultiva-

tor is to be used and remove al! foreign objects

FUEL SAFETY

• Handle fuel with care; it is highly flammable ¢_ Use an approved container

Check fue! suppty before each use, allowing space for expansion as the heat of the engine and/or sun can cause fuet to expand

e Fill fuel tank outdoors with extreme care Never fill fuel

tankindoors Replace fuel tank cap securely and wipe up spilled fuel

Never remove the fuel tank cap or add fuel to a running or hot engine

@ Never store fuel or mini tiller/cuitivator wilh fuel in the

tank inside a buitding where fumes may reach an open flame.

OPERATING SAFETY O Never allow children or young teenagers to operate the

mini tilter/cultivator Keep them away while it is operat- ing. Never allow adults to operate the mini tiller/cultivator

without proper instruction.

O Always wear safety glasses or eye shields during opera-

tion or while performing an adjustment or repair to protect your eyes from foreign objects that may be

thrown from the mini tiller/cultivator

6, Do not put hands or feet near or under rotating parts @ Exercise extreme caution when operating on or crossing

gravel drives, walks, or roads Stay alert for hidden hazards or traffic

® Exercise caution to avoid slipping or falling @ Never operate the mini tiller/cultivator without proper

guards, plates, or other safety protective devices in

place,

@ Never operate the m{ni tiller!cultivator at high transport

speeds on slippery surfaces Look behind and use care when backing

@ Never allow bystanders near the mini tilter/cultivator O Keep children and pets away while operating O Never operate the mini tiller/cultivator without good

visibility or light

@ Do not run the engine indoors The exhaust fumes are

dangerous (containing CARBON MONOXIDE, an ODORLESS and DEADLY GAS)

6, Take ali possibie precautions when leaving the mini tilier/

cultivator unattended Stop the engine

@ Do not overload the mini tilter/cultivator capacity by

attempting to tilt too deep at too fast a rate

SAFE STORAGE

O Always refer to the owner's manual instructions for

important details if the mini tiller/cultivator is to be stored

for an extended period

O Never store the mini tiller/cultivator with fuel in the fueI

tank inside a building where ignition sources are present such as water and space heaters, clothes dryers, and

the like Allow the engine to cool before s_oring in any

enclosure

@ Keep the mini tiller/cultivator in safe working condition

Check all fasteners at frequent intervals for proper

tightness

REPAIR/ADJUSTMENTS SAFETY

O After striking a foreign object, stop the engine (motor)

Remove the wire from the spark plug, and keep the wire away from the plug to prevent accidental starting Thor- oughty inspect the mini titlerlcuftivator for any darnage,

and repair the damage before restarting and operating the mini tiller/cultivator

Q If the mini tiller/cultivator should start to vibrate abnor-

mally, stop the engine (motor) and check immediately for the cause Vibration is generally a warning of trouble

6, Stopthe engine (motor) whenever you leave the operat-

ing position Also, disconnect the spark plug wire before

unclogging the tines and when making any repairs, adjustments, or inspections

O When cleaning, repairing, or inspecting, shutoff the

engine and make certain all moving parts have stopped

@ Never attempt to make any adjustments while the en-

gine is running (except when specifically recommended by the manufacturer)

LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT SAFETY PRECAUTIONS,, 1T MEANS--

L':i

ATTENTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED,

i m,,,,,, H, ,,,,,,,,ul i i, i, ,nl ,,

CONGRATULATIONS on your purchase of a Sears Craftsman Mini tiller/cultivator It has been designed,

engineered and manufactured to give you the best pos-

sible dependability and performance Should you experience any problem you cannot easily

remedy, please contact your nearest Sears Service

Center/Department.. We have competent, well-trained technicians and the proper tools to service or repair this

unit.

Please read and retain this manual. The instructions will

enable you to assemble and maintain your mini tilled cultivator properly. Always observe the "SAFETY

RULES."

MODEL NUMBER 536..797500

DATE CODE DATE OF PURCHASE

THE MODEL AND DATE CODE WILL BE FOUND ON A DECAL ON THE StDE OF THE MIN! TILLER!

CULTIVATOR TINE SHIELD YOU SHOULD RECORD BOTH DATE CODE AND

DATE OF PURCHASE AND KEEP tN A SAFE PLACE FOR FUTURE REFERENCE

,,,,i,lllllll i ill ill

MAaNTENANCE AG REEMENT

A Sears Maintenance Agreement is available on this product. Contact your nearest Sears Store for details

CUSTOMER RESPONSlBILEIES

Read and observe the safety rules

O Follow a regular schedule in maintaining, caring for

and using your mini tiller/cultivator.

@ Follow the instructions under"Customer Responsi-

bilities" and "Storage" sections ofthis owner's manual

PRODUCT SPECBRCATRONS

HORSE POWER: 1.6 hp

DISPLACEMENT: 2.0 cu. in.

GASOLINE CAPACITY: 16 oz.

FUEL/OIL MIX RATIO: 24:1 Gas To Oil

SPARK PLUG : Champion (GAP .035 in.) CJ -8Y

WARNING: This unit is equipped with an internal com- bustion engine and should not be used on or near any

unimproved forest-covered, brush-covered or grass-cov- ered land unless the engine's exhaust system is equipped

with a spark arrester meeting applicable local or state

faws (if any) tf a spark arrester is used, it should be maintained in effective working order by the operator

In the state of California the above is required by law (Section 4442 of the California Public Resources Code) Other states may have similar laws Federal laws apply on federal lands A spark arrester/muffler is available

through your nearest Sears Authorized Service Center

(See REPAIR PARTS section in this manual)

,HI H""H'HH'"HH I

(32.8 c,c)

, i LIII ,, Hill

Unleaded (Regular)

(5 Oz. Oil/1 Gal.

ii ,,HHH,H

Gas)

LgMITED ONE-YEAR WARRANTY ON CRAFTSMAN

MiNi TILLER/CULTIVATOR

For one year from the date of purchase, when this Craftsman Mini tiller/cultivator is maintained, lubricated, and tuned up according to the operating and maintenance instructions in the owner's manual, Sears will repair, free

of charge, any defect in material or workmanship This warranty excludes tine(s), spark plug, and air cleaner which are expendable parts and become worn

during normal use If this Mini tiller/cultivator is used for commercial or rental purposes, this warranty applies for only 30 days from

the date of purchase This warranty applies only while this product is in use the United States WARRANTY SERVICE IS AVAILABLE BY RETURNING THE M1NlTILLER!CULTWATOR TO THE NEAREST SEARS

SERVICE CENTER IN THE UNITED STATES This warranty gives you specific legal rights, and you may also have other rights which vary from state to state

SEARS, ROEBUCK AND CO.,D817WA, Hotfman Estates, IL 60179 USA

TA LE OF CONT TS

SAFETY RULES ................................................ 2

PRODUCT SPECIFICATIONS ...........................3

CUSTOMER RESPONSIBILITIES ....3, 13-15

WARRANTY .............................................................3

TABLE OF CONTENTS ......................................4

CONTENTS OF SHIPPING CARTON ............5

ASSEMBLY ............................................................6-8

OPERATION ................................................... 9-12

Adjustments:

Carburetor ....................................17

Assembly .......................................6-8

Tools Required ............................ 6

To Assemble ..............................6-8

Carburetor Adjustment ................ 17

Choke Control ..............................9,11

Check List:

Operation .................................. 8

Maintenance ............................. 13

Cleaning ..................................... 15

Controls, Mini tiller/cultivator .....9,t0

Cultivating Hints ......................... 12

Customer Responsibilities ,3,I3-15

General Recommendations ....13

Lubrication ........................... 13,14

Mini tilledcultivator, ................. 13

Air Cleaner, Engine ................ 14

Cylinder Exhaust Ports ......... 14

Spark Plugs .............................14

Fuel:

Type ......................... 11

Sto{age ...................... 17

General Recommendations .... 13

Hand Grip

Assembly ......................... 8

Lubrication:

Mini tiller/cultivator .............. 13

Engine ........................ 11

Operation .......................... 9-12

Operating

Your Mini tillerlcultivator ........... 10

Options

Spark Arrestor ......................... 3

INDEX

SERVICE AND ADJUSTMENTS ...............16-17

STORAGE ..................................................................t 8

TROUBLE SHOOTING .................................... 19

REPAIR PARTS

(MINI TILLE R/CULTIVATOR) ................. 20-25

REPAIR PARTS (ENGINE) ....................... 26-29

PARTS ORDERING/SERVICE ......Back Cover

Safety Rules ...................... 2

Service and Adjustments t6-17

Carburetor ....... 17

Specifications ............ 3

Starting the Engine .............. 11

Stopping the Mini tiller/cultivator 10

Storage ..................... 17

Table of Contents ........... 4

Throttle Control

Assembly .............. 8

Operation ..................... 9

TillingHints .................. 12

Tines

Replacement ............ 16

Troubleshooting Points ........... 19

Warranty ..............

Engine:

Air Cleaner ............................... 14

Gas arid Oil Mixture ............... 11

Preparation .......................... 10,11

Starting ........................................t 1

Storage ...................................... 17

Parts Bag ....................................... 5

Product Specifications ............. 3

Repair Parts:

Mini tiller/cultivator ........... 20-25

Engine .............................. 26-29

OONT TS OF HA DWA E PACK

CONTENTS OF PARTS BAG (shown actual size)

[_ llllll|iilliililllill!,,!!!,!|lli!,!,,,,!,,,!,!,,!l!t!lllllllitlIllllll

1 - Tie Strap

I - 10-16 x 1_1t2 Inch

Washer Head Tap Screw

...... .................. J

2 - Hand Grips

2 - Curved Head Screws

2 - 11/32 Inch Flatwashers

2 - 5/16-18 Hex Nuts

2 - Formed (Curved) Washers

Parts packed separately in carton (not shown full size)

(1) - Owner's manual

I I

(1) - Parts Rag

(1) - Depth stake/transport

I i

I " e"

" L_' 't"

!_ t-l-,I

__J

2 - Tee Knobs

els assembly

(1) -Right Lower Ha e

ASS

r ,,,,...........,,, ,,,,,_ ...............i,.,,,.i................

CAUTION: ALWAYS WEAR SAFETY GLASSES OR EYE SHIELDS WHILE ASSEMBLING TILLER/ MINI TILLER/ CULTIVATOR.

IH HI I i II,HI

TOOLS REQUIRED FOR ASSEMBLY

1 - 5/16 inch Wrench (or adjustable wrench) 2 _ 7/16 inch Wrenches (or adjustable wrenches) 1 - Regular Screwdriver

1 - Pair Scissors 1- Hammer

Figure 1 shows the mini tiller/cultivator completely assembled

Reference to the right and left hand side of the mini tiller/ cultivator is from the operator's position behind the unit

TO REMOVE MIN! TILLER/CULTIVA- TOR FROM CARTON

O Remove the plastic parts bag from the carton

® Remove the handles from the carton, @ Remove packing insert from carton that contains

depth stake/transport wheels assembly

@ Lift the tiller/mini tillerlcuitivator out of the carton and

place on a hard level surface

® Remove packing material from around tines

LEFT

HANDLE

RIGHT _

THROITLE _ _

DEPTH _ __

TO INSTALL THE HANDLE

ASSEMBLY

The lower handles have a short bend at the bottom end and are flattened at the top to allow the upper handle to

be placed between the lower handles To assemble the handles, do the following:

• Unwind the throttle control from around the engine and straighten the cable. Be careful you do not kink

the cable.

® Remove two {ocknuts, four washers and two handle

mounting screws from the tine shield (see Fig 2)

FIG. 1

2 LOCKNUTS

4 WASHERS

TINESHIELDNt.'_/_ 2HANDLE

COVER... _Z'_ I!i_il.___ _ MOUNTING

=_- n ._.../ , SCREWS

ii NIHI

FRONT VI EW

FIG,. 2

+ 14 hidden pages

Craftsman 536.7975 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual