Craftsman 5335, 5336 Operator's Manual
Operator’s Manual
C3 19.2 VOLT LITHIUM-ION
BATTERY CHARGER
Model No. 5335
No. 5336
Sears Brands Management Corporation, Hoffman Estates,
IL 60179 U.S.A.
www.craftsman.com
•WARRANTY
•SAFETY
•DESCRIPTION
•OPERATION
•MAINTENANCE
•ESPAÑOL
ѥWARNING: To reduce the risk of injury,
the user must read and understand the
Operator’s Manual before using this product.
2
TABLE OF CONTENTS
Warranty Page 2
Safety Symbols Pages 4-5
Safety Instructions Page 6
Description Page 7
Operation Pages 8-9
Maintenance Page 10
CRAFTSMAN LIMITED WARRANTY
FOR ONE YEAR from the date of sale, this product is warranted against any
defects in material or workmanship.
WITH PROOF OF SALE, a defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web
page: www.craftsman.com/warranty
This ONE YEAR warranty is void if this product is ever used while providing
commercial services or if rented to another person. For 90 DAY commercial
and rental use terms, see the Craftsman warranty web page.
This warranty gives you specic legal rights, and you may also have other
rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
This battery charger has many features for making its use more pleasant and
enjoyable. Safety, performance, and dependability have been given top priority
in the design of this product making it easy to maintain and operate.
SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS!
© Sears Brands, LLC
3
ѥDANGER: People with electronic devices, such as pacemakers, should
consult their physician(s) before using this product. Operation of electrical
equipment in close proximity to a heart pacemaker could cause interference or
failure of the pacemaker.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase the separation
between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer
or an experienced radio/TV technician for help.
4
SAFETY SYMBOLS
The purpose of safety symbols is to attract you attention to possible dangers.
The safety symbols and the explanations with them deserve your careful
attention and understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they give are no substitutes
for proper accident prevention measures.
ѥWARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as “DANGER,” ”WARNING,” and
“CAUTION” before using this tool. Failure to follow all instructions listed in this
manual may result in electric shock, fire, and/or serious personal injury.
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION; may
be used in conjunction with other symbols or pictographs.
ѥDANGER: Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
ѥWARNING: Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
ѥCAUTION: Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage prevention and Information Messages
These inform the user of important information and/or instructions that could
lead to equipment or other property damage if they are not followed. Each
message is preceded by the word “NOTICE”, as in the example below.
NOTICE: Equipment and/or property damage may result if these instructions are
not followed.
ѥWARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician.
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute
Revolutions, strokes, surface speed,
orbits, etc., per minute
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
Read The Operator’s Manual
To reduce the r
re
ad and understand operator’s manual
before using this product.
Eye Protection
Always wear safety goggles or safety
glasses with side shields and a full face
shield when operating this product.
WARNING: The operation of any power tools can result in
foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is
marked to comply with ANSI Z87.1.
5
SAVE THESE INSTRUCTIONS
Some of these following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and more safely.
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute
Revolutions, strokes, surface speed,
orbits, etc., per minute
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
Read The Operator’s Manual
To reduce the risk of injury
, user must
re
ad and understand operator’s manual
before using this product.
Eye Protection
Always wear safety goggles or safety
glasses with side shields and a full face
shield when operating this product.
Safety Alert Precautions that involve your safety.
No-Hands Symbol
Failure to keep your hands away from the
blade will result in serious personal injury.
No-Hands Symbol
Failure to keep your hands away from the
blade will result in serious personal injury.
No-Hands Symbol
Failure to keep your hands away f
rom the
blade will result in serious personal injury.
No-Hands Symbol
Failure to keep your hands away from the
blade will result in serious personal injury.
Hot Surface
To reduce the risk of injury or damage,
avoid contact with any hot surface.
SYMBOL NAME DESIGNATION/EXP LANATION
No-load Speed
6
SAFETY INSTRUCTIONS
GENRAL SAFETY RULES
ѥWARNING: Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS
• This manual contains important safety and operating instructions for battery
charger Models 5335/5336.
• Before using the battery charger, read all instructions and cautionary
markings on the battery charger, battery, and product using battery.
• Dry location use only.
• Do not expose to rain.
ѥCAUTION: To reduce risk of injury, charge only C3 19.2V, max. 4000mAh,
Lithium-ion type rechargeable battery packs. Other types of battery pack may
burst, causing personal injury and damage.
• Do not operate charger in a closed-in area or restrict ventilation in any way.
7
DESCRIPTION
KNOW YOUR CHARGER (Fig. 1)
Fig. 1
Cord
Electrical contacts
Mounting
slot
Green LED (Normal
charging light)
Red LED (Defect light)
Cord
Mounting Slot
Electrical Contacts
Green LED (Normal
charging light)
Red LED (Defect light)
Charger Model No. 5335
Charger Model No. 5336
8
PRODUCT SPECIFICATIONS
Charger Input 120Volts, 60Hz AC only
Optimum Charging Temperature 32°F (0° C) -104°F (40°C)
ѥWARNING: The safe use of this product requires an understanding of the
information on the tool and in this Operator’s Manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
OPERATION
HOW TO CHARGE A BATTERY PACK
NOTICE: Your Lithium-Ion battery pack is shipped partially charged. Before
using it the rst time, fully charge the battery pack.
1. Charge the battery pack with the correct charger.
2. Connect the charger to a power supply; the red and green LED will
illuminate for one second and then turn off automatically.
3. Attach the battery pack to the
charger by aligning the raised
ribs of the battery pack with
the slot in the charger. Insert
the battery pack onto the
charger (Fig. 2).
4. The charger will communicate
with the battery pack circuitry
to evaluate the condition of
the battery pack.
5. The green LED will ash
continuously during
normal charging.
6. After charging is complete,
the green LED on the charger
will be on.
7. The battery pack will fully
charge, but will not overcharge,
if left on the charger.
Fig. 2
LITHIUM-ION
Loading...