![](/html/65/65aa/65aa8f43a5d24d91d3fe04a3ea02b3c639708db293a87b18629f2d3cabd526d9/bg1.png)
Operator's Manual
15 CU. FT. POLY CART
Model No. 486.24247
STOP
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and Operating Instructions.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
PRINTED IN U.S.A. FORM NO. 41761 (12/12/14)
![](/html/65/65aa/65aa8f43a5d24d91d3fe04a3ea02b3c639708db293a87b18629f2d3cabd526d9/bg2.png)
TABLE OF CONTENTS
WARRANTY & SAFETY ..................................................2
FULL SIZE HARDWARE CHART ....................................3
CARTON CONTENTS .....................................................4
ASSEMBLY ......................................................................4
OPERATION ....................................................................8
MAINTENANCE ..............................................................8
SLOPE GUIDE ................................................................9
REPAIR PARTS ILLUSTRATION .................................. 10
REPAIR PARTS LIST ..................................................... 11
PARTS ORDERING/SERVICE ......................BACK PAGE
WARRANTY
CRAFTSMAN LIMITED WARRANTY
FOR TWO YEARS from the date of sale this product is warranted against defects in material or workmanship.
WITH PROOF OF SALE a defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web page: www. craftsman. com/warranty
This warranty does not cover expendable items that can wear out from normal use or deterioration within the warranty
period, including but not limited to tires, belts, exterior nishes or product labels.
This warranty does not apply to a product that is damaged or altered through transportation, misuse, abuse, corrosion,
accident, neglect, modication or mishandling.
This warranty is void if this product is ever used while providing commercial services or if rented to another person.
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
DO NOT RETURN TO STORE for Missing Parts or Assembly Questions
Call 1-866-576-8388 Attachment Hotline
The model number and serial numbers will be found on a
decal attached to the 15 Cu. Ft. Poly Cart.
You should record both the serial number and the date of
purchase and keep in a safe place for future reference.
MODEL NUMBER: 486.24247
SERIAL NUMBER: __________________
DATE OF PURCHASE: __________________
SAFETY
Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to
operate the equipment. Exercise caution at all times when using power equipment.
LOOK FOR THIS SYMBOL TO POINT OUT
IMPORTANT SAFETY PRECAUTIONS. IT
MEANS – ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED.
Exercise caution at all times when using power equipment.
1. Read this owners manual before attempting to assemble or operate the cart.
2. Read the vehicle owners manual and know how to operate your tractor, before using the cart attachment.
3. Do not at any time carry passengers in this cart. It has not been designed to carry passengers.
4. Never allow children to operate the tractor or the cart attachment.
5. Do not allow adults to operate the tractor or cart attachment without proper instructions.
6. Always begin with the transmission in rst (low) and gradually increase speed as conditions permit.
7. Tow the cart at reduced speed over rough terrain and hillsides or near creeks and ditches to prevent tipping over and
loss of control. Do not drive too close to a creek or ditch.
8. Vehicle braking and stability may be affected with the attachment of this cart. Do not ll cart to maximum weight
capacity without checking the capability of the towing vehicle to safely pull and stop with the cart attached.
9. Before operating vehicle on any grade (hill) refer to the safety rules in the vehicle owner's manual concerning safe
operation on slopes. Refer also to the slope guide on page 11 of this manual. Stay off steep slopes!
10. Do not tow this cart on highways or on public thoroughfares.
11. Maximum towing speed is 10 m.p.h.
12. Follow maintenance and lubrication instructions as outlined in this manual.
2
CAUTION: VEHICLE BRAKING AND
STABILITY MAY BE AFFECTED WITH THE
ADDITION OF AN ACCESSORY OR AN
ATTACHMENT. BE AWARE OF CHANGING
CONDITIONS ON SLOPES.
![](/html/65/65aa/65aa8f43a5d24d91d3fe04a3ea02b3c639708db293a87b18629f2d3cabd526d9/bg3.png)
FULL SIZE HARDWARE CHART
REF QTY. DESCRIPTION
A 1 Hex Bolt, 5/16" x 4"
B 1 Hex Bolt, 3/8" x 1"
C 4 Hex Bolt, 1/4" x 3/4"
D 8 Truss Head Bolt, 5/16" x 3/4"
E 4 Nylock Nut, 1/4"
F 9 Nylock Nut, 5/16"
G 2 SEMS Nut, 5/16"
H 1 Nylock Nut, 3/8"
I 2 Hub Cap
B
A
REF QTY. DESCRIPTION
J 4 Flat Washer, 1/4"
K 4 Flat Washer, 1"
L 2 Cotter Pin, 1/8" x 1-1/2"
M 1 Extension Spring
N 1 Hitch Pin
O 1 Hair Cotter Pin, 1/8"
P 1 Spring Puller Tool
Q 2 Thick Washer
SHOWN FULL SIZE
D
C
E
I
F
J
L
G
H
K
NOT SHOWN FULL SIZE
P
M
N
O
Q
3
![](/html/65/65aa/65aa8f43a5d24d91d3fe04a3ea02b3c639708db293a87b18629f2d3cabd526d9/bg4.png)
CARTON CONTENTS
1. Poly Tray
2. Wheel Support
3. Latch Stand Plate
5
4. Latch Stand Bracket
5. Draw Bar Tongue
6. Wheels (2)
1
2
7. Latch Lock Lever
8. Hitch Bracket
9. Axle
3
4
7
9
8
6
ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
(1) Phillips Screwdriver
(1) Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrench
(2) 9/16" Wrenches
STEP 1: (SEE FIGURE 1)
• Verify that all parts and all fasteners on pages 2 and
3 are included in the carton and parts bag. Refer
to page 2 to identify fasteners used in the following
instructions.
• Place the latch lock lever (7) through the slot in the
tongue (5). Assemble the hex bolt (A) through the
tongue, the lever, and two (SEMS) hex nuts (G)
placed on each side of the lever. Assemble the nylock
nut (F) onto the end of the hex bolt (A) and tighten
so that the hex bolt (A) can still rotate freely. Tighten
the two (SEMS) hex nuts (G) against each side of the
latch lock lever (7) so that it is centered in the slot.
G
F
7
5
A
FIGURE 1
4