Craftsman 486.242101 Owner's Manual

Operator's Manual

STOP

SUN SHADE

Model No. 486.242101

(For Source 247. Tractors)

DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388

CAUTION:

Before using this product, read this manual and follow all Safety Rules and Operating Instructions.

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. www.sears.com/craftsman

PRINTED IN U.S.A. FORM NO. 41990 rev. (10/29/12)

TOOLS NEEDED FOR ASSEMBLY

7/16" Wrenches (2) 1/2" Wrench (2) 5/8" Wrench (1) 1/2" Socket Wrench and Extension (1)

TABLE OF CONTENTS

SAFETY .......................................................................... 2

WARRANTY ................................................................... 2

CARTON CONTENTS .................................................... 3

HARDWARE CHART ...................................................... 4

ASSEMBLY INSTRUCTIONS ......................................... 5

CANOPY INSTALLATION ............................................. 13

OPERATION ................................................................. 14

MAINTENANCE/STORAGE ......................................... 14

REPAIR PARTS LIST.................................................... 15

PARTS ORDERING/SERVICE ........................ Back Page

SAFETY

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment.

• This sun shade does not provide protection against exhaust fumes, collision, rollover or other accidents.

• Read the sun shade and vehicle owner's manuals and know how to operate your vehicle and sun shade before using the sun shade attachment.

• Be sure there is adequate ventilation when using the tractor and sun shade in conned areas.

• The sun shade will restrict your eld of vision in some

directions. Use extra caution when operating your tractor with the sun shade attached.

• Watch out for low tree limbs or other overhead obstructions that may not previously have interfered with operation of the tractor. The extra height of the sun shade may cause these objects to become obstacles.

• Check the area of operation thoroughly before using the tractor.

Look for this symbol to point out important safety precautions. It means — Attention!! Become

alert!! Your safety is involved.

WARRANTY

CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship. A defective product will be replaced free of charge. For warranty coverage details to obtain free replacement, visit the web site: www.craftsman.com This warranty is void if this product is ever used while providing commercial services or if rented to another person.

This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

DO NOT RETURN TO STORE for Missing Parts or Assembly Questions Call 1-866-576-8388 Attachment Hotline

The model number and serial numbers will be found on a decal attached to the base assembly. You should record both the serial number and the date of purchase and keep in a safe place for future reference.

MODEL NUMBER: 486.242101

SERIAL NUMBER: __________________

DATE OF PURCHASE: __________________

CARTON CONTENTS

REF. PART QTY. DESCRIPTION NO. NO.

1 49242 1 Base Top Tube 2 25014 2 Upright Tube 3 25013 2 Top Tube 4 25012 1 U-Tube 5 25015 3 Support Rod 6 48660 1 Vinyl Canopy

REF. PART QTY. DESCRIPTION

NO. NO.

7 27017 2 Mount Bracket 9 27263 2 Support Bracket 24 49325 2 Base Leg Tube 25 25304 2 Rear Base Support Bracket Hardware Pack (see page 4)

HARDWARE CHART

SHOWN FULL SIZE

NOT SHOWN FULL SIZE

REF. PART QTY. DESCRIPTION NO. NO.

8 43720 2 Plastic Knob 10 43081 6 Flat Washer, 5/16" 11 43648 4 Hex Bolt, 1/4-20 x 1-1/2" 12 47189 4 Nylock Nut, 1/4-20 13 48661 4 Adhesive Pad 14 25357 2 Spacer, .31 ID x .44 OD x .14 L. 15 44977 2 Carriage Bolt, 5/16-18 x 2" 16 43086 2 Lock Washer, 5/16"

NOTE: Not all of the supplied parts and hardware will be needed for one particular tractor. Unneeded items may be discarded after assembly has been completed.

NOTE: Most fasteners are readily available through any hardware store.

REF. PART QTY. DESCRIPTION

NO. NO.

17 43070 2 Washer, 3/8" 18 23625 4 Spacer, .38 ID x .62 OD x .27 L 19 44911 2 Spacer, .41 ID x 1.25 OD x .5 L 20 43224 4 Hex Bolt, 5/16-18 x 2-1/4" 21 46584 6 Hex Nut, 5/16-18 Whiz Lock 22 44180 4 Hex Bolt, 5/16-18 x 2" 23 41370 2 Washer, .59 ID x 1.125 OD

ASSEMBLY INSTRUCTIONS FOR (LT) LAWN TRACTORS

(with 7-1/2" between the seat hinge and the seat springs)

If you have a (YT) Yard Tractor or (GT) Garden Tractor, skip to page 10.

(Models 247.28888, 247.28880, 247.28981, 247.28980, 247.28672, 247.28984).

If you have a (LT) Lawn Tractor, go to step 1 below.

STEP 1: (Figure 1)

IDENTIFY THE TYPE SEAT YOU HAVE. Raise the seat and measure the distance between the

hinge bolts and the center of the seat springs. If the

distance measures 7-1/2", go to step 2 below.

If the distance measures 9-1/2", skip to page 8.

7-1/2"

STEP 2: (Figure 2)

Remove the seat springs and bolts from the tractor.

STEP 3: (Figure 3)

Loosely attach a mount bracket to each base leg tube using one bolt and nut. Do not tighten yet.

FIGURE 1

REMOVE BOLTS AND SPRINGS

FIGURE 2

5/16" WHIZLOCK NUT

5/16" x 2" HEX BOLT

5/16" WHIZLOCK NUT

FIGURE 3

+ 11 hidden pages