Craftsman 486.240362 User Manual
®
Safety
Assembly
Operation
Maintenance
Parts
STOP
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
TABLE OF CONTENTS
MODEL NUMBER: 486.240362
SERIAL NUMBER: __________________
DATE OF PURCHASE: __________________
.......................................................................
....................................
......................................................
..............................................................
..................................................
......................................................................
Do not allow anyone to operate the sweeper without proper instructions.
Do not permit children to operate sweeper.
Eye protection should be worn while operating sweeper.
Do not push or tow sweeper too close to a fi re.
Do not attempt to remove wire or string wrapped around brush while brush is rotating.
Operate sweeper at reduced speed on rough terrain, in ditches and on hillsides to prevent tipping and loss of control.
This sweeper is not meant for street or highway use. Watch for traffi c when sweeping near roadways.
Keep all nuts, bolts and screws tight to be sure equipment is in safe working condition.
Sweeper should be stopped and inspected for damage after striking a foreign object and damage should be repaired
Follow maintenance instructions as outlined in this manual.
WARRANTY
SAFETY
CARTON CONTENTS
No.
No.
B Flat Washers 1/4" I.D. 4
B Flat Washers 1/4" I.D. 4
C Hex Lock Nuts 1/4-20 8
C Hex Lock Nuts 1/4-20 8
D Bag Rod Clips 4
D Bag Rod Clips 4
E Curved Head Bolts 1/4-20 x 1" 4
E Curved Head Bolts 1/4-20 x 1" 4
F Palnut 1/4" 2
F Palnut 1/4" 2
G Plastic Caps (for bag rods) 2
G Plastic Caps (for bag rods) 2
H Plastic Caps (for leg stands) 2
H Plastic Caps (for leg stands) 2
HARDWARE PACKAGE
ASSEMBLY
Loading...