Craftsman 137248850 Installation Guide

6)

instruction of the Right Side Table Extension Wing

For CRAFTSMAN Model 137.248850 - 10 in. TABLE SAW WiTH STAND

iNSTALLiNG RIGHT SiDE TABLE EXTENSION WiNG

(FIG. A, B, C)

Insert the screws (1) through the mounting tubes (2)

into the side table extension wing (3).

NOTE:

• Make sure the front mounting tube has the
measuring scale visible from the front of the

saw.

• Do not tighten screws until the scales are
properly aligned.

Fig. A

2

2. Insert the table extension mounting tubes (2)
into the two matching holes in the cam lever

assemblies.

3. Slide the side table extension wing (3) to touch the

saw table (4) closely.

4. Lock cam locking levers (5).

5. Place the rip fence (6) on the saw table (4) and the
extension wing (3).

6. Align the rip fence pointer (7) to the scale number

11".

7. Push down on the fence handle (8) to lock.

8. Tighten the screws (1-Fig. A).

Fig. C

4

\

Fig. B

5 2