Craftsman 129.33121410 User Manual

Instruction Manual

TABLE OF CONTENTS

GENERAL SAFETY RULES

20 INCH

HIGH VELOCITY FAN

Model No. 129.33121410

CAUTION: Before using this
product, read this manual and
follow all its Safety Rules
and Operating Instructions.

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com

• SAFETY

• ASSEMBLY

• OPERATION

• MAINTENANCE

Warranty…………………………………………............................Page 2

General Safety Rules.....………………….……............................Page 2-3

Description …………………………….……..................................Page 4

Assembly.………………………………………..............................Page 5

Operation....………………………………………...........................Page 5-6

Care And Maintenance …………………………………….............Pages 6

Troubleshooting...........................................................................Page 7

● Always unplug unit before assembly, disassembly or cleaning.

● Always unplug unit when not in use, when moving from one location to another and before

cleaning.

● To disconnect, grip the plug and pull it from the wall outlet. Never yank the cord.

● The use of attachments not recommended or sold by the appliance manufacturer may

cause hazards.

● Avoid contact with moving parts.

CAUTION

●

CRAFTSMAN ONE YEAR LIMITED WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against any defects
in material or workmanship. With proof of purchase, a defective product will be replaced

free of charge.

For warranty coverage details to obtain free replacement, visit the web page:
www.craftsman.com/warranty

This ONE YEAR warranty is void if this product is ever used while providing commercial
services or if rented to another person. For 90 DAY commercial and rental use terms,
visit the Craftsman warranty web page.

This warranty gives you specific legal rights, and you may also have other rights which
vary from

Sears Brands Management Corporation, Hoffman Estates, IL 60179

state to state.

GENERAL SAFETY RULES

Please read and understand this entire manual before attempting to assemble, operate or

install the product.

WARNING

● Use this product only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electrical shock or injury to persons, and may void the
warranty.

2

DO NOT operate this product with a damaged cord or plug after a malfunction, or

if it is dropped or damaged in any manner.

●

DO NOT operate the unit in the presence of explosive and/or flammable fumes.

●

DO NOT place the unit or any parts near an open flame, cooking or other heating

appliance.

● DO NOT leave children unattended near the fan or leave the fan unattended while in
use.

●

DO NOT use outdoors.

●

Always use on a dry, level surface.

●

DO NOT operate if the product housing (front or rear grill or product stand) is removed

or damaged.

●

A loose fit between the outlet and plug may cause the plug to overheat. Have a qualified

electrician replace the outlet if the plug doesn't fit properly.

●

DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners or

the like. Arrange cord away from traffic areas so that it will not be tripped over.

●

NEVER connect the unit to any power sources other than a 120 volt AC polarized

outlet.

●

To protect against electrical shock, this appliance is equipped with a cord having a
3-prong grounding-type plug for insertion into a proper 3-prong grounding-type receptacle.
DO NOT alter the plug for use in a 2-prong receptacle. If the plug will not fit into a receptacle,
have the proper receptacle installed by a qualified electrician.

SAVE THESE INSTRUCTIONS!

3

DESCRIPTION

A

F

ASSEMBLY

1.Use a phillips head screwdriver to attach the two foot pads (BB) to the bottom of the

B

C

D

E

fan stand (F) with the two screws (AA).

HARDWARE USED

AA

BB

Screws

Foot Pad

x 2

x 2

OPERATION

3. Insert power cord 3-prong grounding plug into a proper 3-prong grounded 120 volt wall receptacle.

4. To operate the fan, turn the rotary switch control to the desired fan speed (HI, MED, LOW)
(see Fig. 2).

5. Tilt the fan back or forward on the stand to adjust the air output direction.

2

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

The fan will
not operate.

1. The fan isn’t plugged in and/or
the electrical outlet isn’t working
properly.

2. Obstructions are keeping the
fan from working.

1. Make sure the fan is plugged in and
/or the electrical outlet is working
properly.

2. Turn off and unplug fan. Visually
inspect for obstructions and remove
if found. Plug fan in and turn on.

1

BB

Part

A

B

C

D

E

F

Description

Front grill

Fan blade

Rear grill

Rotary switch control

Motor

Stand

4

Quantity

1

1

1

1

1

1

F

AA

OPERATION

1. Make sure the unit is in the OFF position before plugging the unit into the outlet.

2. Place the fan on a dry, level surface.

5

OPERATION cont.

CARE AND MAINTENANCE

DURING SEASON CARE:

● Before cleaning, be sure to turn off and unplug the unit.

● Keep this unit clean. Carefully wipe the unit with a soft, damp cloth. Please be

very cautious near the motor.

● DO NOT immerse the fan in water and never allow water to drip into the motor housing.

● Never use gasoline, benzene or thinner to clean fan. This will damage the surface

of the unit.

● After cleaning, be sure to completely dry the unit with a soft cloth.

AFTER SEASON CARE:

● Clean unit before storage, then cover with a vinyl bag or place in original shipping

box. Store in a cool, dry place.

6 7