![](/html/34/345b/345be59873cf3752d65602c8dfab724f826ad89107d452cbca68c29c777bb91f/bg1.png)
OPERATING INSTRUCTIONS
AND PARTS LIST FOR
CRAFTSMAN BENCH SAW
10-INCH TILTING ARBOR
MODEL NUMBER i13.29991
The above Model Number will be found on a plate attached to your
saw, at the back, near the bottom of the base. Always mention the
Model Number when communicating with us regarding your saw or
when ordering parts.
HOW TO ORDER REPAIR PARTS
All parts listed herein may be ordered through Sears, Roebuck and Co.
o...... p_y,,o-.,e,_r° Limit._d. When ordering parts by mail from the mail
order house which serves the territory in which you live, selling prices
will be furnished on request or parts will be shipped at prevailing prices
and you will be billed accordingly.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOW-
ING INFORMATION AS SHOWN IN THIS LIST:
1. The PART NUMBER 3. The MODEL NUMBER 113.29991
2. The PART NAME 4. The NAME of item--lO INCH BENCH SAW
COAST TO COAST NATION-WIDE
SERVICE FROM SEARS
FOR YOUR CRAFTSMAN BENCH SAW
SEARS, ROEBUCK AND CO. and
SIMPSONS-SEARS LIMITED in Canada
back up your investment with quick,
expert mechanical service and genu-
ine CRAFTSMAN replacement parts.
If and when you need repairs or serv-
ice, call on us to protect your invest-
ment in this fine piece of equipment.
SEARS, ROEBUCK AND CO.- U. S. A.
IN CANADA, SIMPSONS-SEARS LIMITED
Printed in U.S.A.
![](/html/34/345b/345be59873cf3752d65602c8dfab724f826ad89107d452cbca68c29c777bb91f/bg3.png)
CRAFTSMAN BENCH SAW,
WHEN ORbERING REPAIR PARTS, ALWAYS GIVE THE FOLLO_F1NG
INFORMATION AS SHOWN IN THIS LIST:
Key
No. DESCRIPTION
Part No. No,
30419 SAW ARBOR HOUSING ASSEMBLY (Key 60 6306
...... -.... /8 61 6415
2 3508 Arbor Bearing Retainer 62 130
Nos, I-I0) 6417
10 INCH TILTING ARBOR MODEL NO. 113.29991
1. The PART NUMBER.
2. The PART NAME.
3. The MODEL /_UMBER--II3.29991.
4. The NAME of item-10 _ Bench Saw.
FIGURE 1
PARTS LIST
Key Part No.
3 6540 Bearing Retainer Ring 63 6407
4 3509 Arbor Bern'lug • 64 6410
5 30420 Assera. Arbor Housing 65 S-1284
6 30442 Retaining Ring 66 6112
7 3513 Saw Arbor Key 67 3556
8 6532 Arbor Atsembiy 68 S-739
9 6538 Loose Collar 69 6163
10 6362 Arbor Nut 70 S-1312
30624 CRADLE ASSEMBLY (Key Nos. 11-13) 71 5-659
I 1 30625 Cradle 72 6480
12 6535 Stop Pin 73 141
13 6534 Pivot Pin
14 6527 Arbor Housing Retainer 74 5-323
15 9-1643 t V Belt 1/2x43" 75 6162
16 30646 Single Groove V.Pulley 2-1/2 x 5/8" Bore 76 6113
17 5.1242 *Alien Wrench for 5/16 Set Screw 77 6408
18 5-1302 gSteel Wmher, 13/64x3/4x.0239" 78 6409
19 S-1303 ; Steel Washer,.13/64 x 3/4 x .0299" 79 6111
20 6509 gSplltrer Blade Support 80 135
21 S-1275 *_Rd. Hd. Mech. Screw with External Lock Wmh- 81 9-2760
22 9-3240 tChisel Tooth Comb. Sew Blade, 10" x 5/8" Bore 83 30426
23 35_0 Arbor Wrench 84 S-1300
24 30626 Sew Base Assembly
25 30435 Nameplate 85 6105
26 633l Retaining Ring 86 19
27 S-1262 Lift Spring Washer 87 18
28 6512 Lift Screw 88 17
29 30653 "0" Ring 89 30427
30 6523 Tilt Nut 90 S-I270
31 S-1289 *Headless Slotted Cup Pt. Set Screw Brass, 91 30428
32 6451 Stop Collar
33 S-1271 Fiber Washer, .758xlxI/32" (As. Req'd.) " 93 S-602
3_ S-1283 Steel Washer, .693 x 15/16 x 1/64" 94 30429
35 6516 Tilt Screw 96 6579
36 6520 Spring Washer _ 97 9-29992
37 60_4 Tilt Screw Spacer
38 9-2993 tSAW GUARD ASSEMBLY 98 S-1379
39 5309 Guard Insert 10 _ Saw 100 9-29998
40 6319 Clamping Knob 101 136
41 6371 Lift Plate Assembly 102 54
42 6548 Guard end Splitter Blade Assy, 103 S-310.
43 72 Splitter Blade Bracket
44 S-203 *Hex. Hd. Cap Screw, 5/16-18x3/4" 104 S-297
45 6287 Guard Insert Spring Clip 106 6510
46 S-1272 *Pan Hd. Mach. Screw, 8-32 x 1/4 # 107 S-299
30651 MOTOR SUPPORT ASSEMBLY (Key No*.
47 S-1261 Steel Washer, .253 x 3/4 x 1/16" 30434
48 6423 Spring Washer 109 30430
49 30628 Pivot Arm Screw
50 S-1259 Retaining Ring 110 30432
51 6426 Motor Support Hinge Rod 111 S-1293
52 30424 Motor Base and Bracket Assembly 112 S-1335
53 30627- Motor Bmm Support Asaembly 114 S-1297 "
54 9-2769 tBENCH SAW SIDE EXTENSION
55 S-1288 CHex. Hd. Cap Serev:,, 5/16-18x 1-1/8" 115 S-1324
56 S-275 *Ned. lock Wmher, 5/16 SAE 116 S-1301
57 S-1206 aHex. Nut, 5/16-18x7/32"
_.,_J_ T_ie Extension 117 S-1296
59 S-241 *Hen. Hd. Cap Screw, 5/16.18x7/8 # • I|8 6552
• Standard hardware item--mey be purchased locally. 30669
t These parts supplied with Guard Atsembly Cat. No. 9-2993.
f Stock item - may. be secured through the Hardware Departments
of most Sears or Stmpsons-Seart Retail Stores or Mail Ogden Home*.
er, 10-32x 1/2"
1/4.20 x 3/16" 92 S-626
82 9-2125
93 S-1298
99 S-329
105 S-1212
47-53) IO8 6305
113 30629
-$--
DESCRIPTION
Extension Rack
RIP PENCE ASSEMBLY (Key Not. 61.80)
Ri_.P Fence
p Fence Clamp Pin
Clamp Rod Nut
Rip Fence Clamp
*Steel Washer, 17/64 x 5/8 x 1/32 #
Rip Fence Clamp Cushion
Rip Fence Pinion
*Fil. Hd. Mech. Screw, 10-32 x 5/8"
Alignment Bar As_embl 1,
*Pan Hd. or Rd. Hd. Mech. Screw, 10-32 x 5/8 #
*Pan Hd. or Rd. Hd. Mech. Screw, 10-32 • 7/8 #
Rip Pence Pinion Spring
Rip Fence Knob
* Headless Slotted Cup Pt. Set Serew,
1/4-20 x 1/4#
Rip Fence Guide
Cam Clamp I_ever Insert
Cam Clamp Lever
Rip Fence Clamp ROd
Cam Face
Rip Fence Indicator
tMITRE GAGE ASSEMBLY (Key Nos. 81-82)
tStop Rod Assembly
Table Trunnion
*Hex. Hd. Mech. ,Scrr_w with External Lock
Washer, 3/'8-16 x 1"
Clamp Screw Washer
Clamp Screw Spring
Clamp Screw Handle
Clamp Screw
Front Panel
*Pan Hd.Type Z Sheet Metal Screw, No. 10 x 3/8"
T'dt Ojmge
*Rd. ltd. "I_pe Z Sheet Metal Screw,_No. 8 x 5/16 W
*Rd. Hd. Math. Screw, 10-32 x 3/8 #
Tilt Polater
*Alien Hd. Cup Pt. Set Screw, 5/16-18 x 5/16"
Hand _Vheel Alterably, 4-1/2"
TPhmer Head Insert Assy.
Steel Wmher, 17/64 x I x 1/16 #
*Rd. Hal. Mech. Screw 1/4.20x I"
t Dado Insert Atty.
Pront Panel Stiffener
Tilt Bearing Bracket
*Med. Lock Washer, 1/4 SAE
*Hex. Nut, !/4-20x3/16"
Spring Wmher
Tiis Screw Block
Steel Washer .758 x 1 x .047"
Pence Slide Gear Rack
TABLE INSERT ASSEMBLY
(Key No_ .109.11.2)
Table Insert
Table Insert Clip
*Internal Lock Washer, No. 1206
*Pan Head Mech. Screw, 6-32x 1/8 #
Table
*Hex. Hd. Ma_:h. Screw with External Lock
Washer, 5/16-18 x 3/4 #
*Hex. Hd. Mech. Screw, 5/16-18x5/8"
*Hex. Hd. Mech. Screw with External Lock
Washer, 3/8-16 • I/2"
Retaining Ring
Sleeve
Operatlng Instructions at_d Parts List for Crafts-
man 10 Inch Bench Saw, Model 113.29991