Cradlepoint MBR1400V2 User Manual
Mission-Critical Broadband Router
with Integrated Business Modem
Setup Guide
MBR1400 Series
MBR1400 - Mission-Critical Broadband Router
PACKAGE INCLUDES
MBR1400 Router (Wireless N Gigabit)
Integrated Business-Grade Modem
(Optional)
WiFi Antennas (3x)
Modem Antennas (2x optional)
Wall Power Adapter (12v DC)
Ethernet Cable (5-feet)
1
Mounting Hardware (1x)
Setup Guide
Mission-Critical Broadband Router
with Integrated Business Modem
Setup Guide
MBR1400 Series
MBR1400 - Mission-Critical Broadband Router
The CradlePoint Mission-Critical Broadband
Router (MBR1400) is built to provide an
instant network connection from high-speed
broadband data modems to your network.
CONNECT
Integrated Business-Grade Modem, USB or ExpressCard
modems, Ethernet-Based Wired Services, WiFi
Designed for small businesses, branch ofces,
and retail locations, the MBR1400 provides a
secure, primary or backup connection to the
Internet.
With features like failover/failback, secure VPN,
VLAN support, multiple encryption modes,
dual band WiFi broadcast (2.4 GHz or 5 GHz),
guest networks, WiFi as WAN, and data usage
management and alerts, the MBR1400 can
meet all your business needs.
2
WiFi Networking with the MBR1400
The MBR1400 is compatible with all major corporate network environments like Cisco, Juniper, SonicWall,
and others. It also fully supports all 802.11 a/b/g/n client adapters for WiFi networking.
Our web-based conguration and status tool supports Windows XP, Windows Vista, Windows 7, Mac OS
X, and most of the Linux distributions - allowing you to manage the router in common environments.
The MBR1400 web-based administration allows you to manage settings, backup and restore, implement
the latest rmware upgrades, plus get a complete log of diagnostic and status events for advanced
troubleshooting. Remote administration is available through WiPipe Central, SNMP, or a CLI.
The router supports custom DNS conguration with OpenDNS, DHCP server and conguration, and dual-
band WiFi options with multiple network names (SSIDs), 802.11 a/b/g/n modes, and broadcast channel
selection. This guide will cover additional features of advanced conguration, starting on page 13.
With an MBR1400, you have the power and exibility you need for the most demanding small business,
branch ofce, or retail environment. The MBR1400 is a exible, dependable router you can trust.
3
Ports and Features of the Router ( left side )
4
WiFi Antenna Connector
(Reverse SMA)
10/100/1000 Ethernet Ports
(Congurable LAN or WAN)
WiFi Antenna Connector
(Reverse SMA)
Modem Port
(USB 2.0)
Reset
Power
Switch and Port
WiFi Antenna Connector
(Reverse SMA)
Ports and Features of the Router ( right side )
5
Note: may be covered
by Integrated BusinessGrade Modem
Integrated Modem
3G/4G Antenna Connector
Modem Security Tab Slot
WiFi
On/Off
Modem Slot
(ExpressCard)
(SMA)
ExpressCard Lock
Modem Port
(USB 2.0)
3G/4G Antenna Connector
(SMA)
ExpressCard Lock
Modem Port
(USB 2.0)
Modem Security Tab Slot
Modem Slot
(ExpressCard)
SIM Card Installation (LTE version only)
Step 1 Step 2 Step 3 Step 4
1. Disconnect the modem from the router by pulling from side to side. If you
experience difculty, apply slight pressure to the back of the device to facilitate
separation.
2. Insert SIM card in the slot in the modem (notch end rst, it will click into place).
3. Reconnect the modem to the router.
4. Insert screws (3) to secure connection between router and modem (backside).
6
Getting Started
1. Connect the Router to a Modem / Data Source.
Keep the router in the OFF position until the modem is securely connected. Connect a CradlePoint
Business-Grade Modem, or a supported USB or ExpressCard modem to the router in their appropriate
port or slot. Your modem will require an active subscription from your service provider. If you have not
already done so, add a service plan to your Integrated Business-Grade Modem by contacting your
service provider. You will need the modem IMEI, ESN, or WiMAX MAC and SIM ID (LTE/EVDO and LTE/
HSPA+ versions only). Connect a Cable or DSL modem to the blue Ethernet WAN port (see page 4).
2. Connect the WiFi and Modem Antennas.
Attach the three included WiFi and optional modem antennas to the connectors. Antennas are jointed,
which enables you to position them for optimal WiFi broadcast. To attach, hold the antenna straight and
twist the base of the antenna to connect, folding the joint if needed. Please note that 2.4 GHz antennas are
provided. 5 GHz antennas are available as accessories.
3. Connect to a Power Source.
Connect the router to the provided power supply (12V DC Wall Adapter). When you ip the power switch
to the ON ( I ) position, watch for the appropriate modem LED to illuminate. Ensure the connected modem
LED is lit with a solid green light, which indicates that the modem is properly connected. For other LED
states, please see descriptions on page 11 and 12.
7
Loading...