COWIN E8 ANC User Manual

E8 ANC Wireless Headphones

User Guide

EN

What’s in the box

- E8 ANC Wireless Headphones

- Carrying Case

- USB Charging Cable

Overview

Audio jack

Connections

3.5mm 6.5mm

3.5mm to 6.5mm Audio Converter

- 3.5mm Audio Cable

- User Guide

- Warranty Card

Noise cancellation on/off switch

Power / Bluetooth / Call control button
Volume up / skip forward button
Volume down / skip backward button

USB charging port

Airlne Headphone Adapter

LED Indicators

Indicator activity System state

Solid green Noise cancellation ON

Indicator activity

Flashing blue and red alternately

Flashing red

Solid red

Solid blue

Flashing blue slowly

System state

Power on & In pairing mode

Battery low

Charging

Full charge

Paired

Get Started

To power on: Press and hold for five seconds.

You hear the power-on tones.

: Once powered on, the white LED flashes

Tip

blue and red alternately.

To power off: Press and hold for three seconds.

You hear the power-off tones.

User Your Headphones

Music Control

Task Button Operation

Volume up / Skip forward Press once / Press and hold

Volume down / Skip backward Press once / Press and hold

Clear the headset pairing list Press and hold for 3 seconds

Call Control

Task Button Operation

Pick up / hang up a call Press once

Reject an incoming call Press and hold for 1 second

Bluetooth Connection

Wear Your Headset

CARE AND MAINTENANCE

- Do not drop, crush, bend or apply excessive force to the device.

- Do not expose your device to moisture, extreme or prolonged heat, cold,humidity, or other
adverse conditions. Avoid storing it in damp, humid or wet places, as it is not waterproof.

- Clean the unit with a soft cloth or damp chamois leather. Never use solvents.

- The Unit can only be opened by qualified personnel.

- This device contains magnets. Keep magnetic field sensitive products such as credit cards and
video screen away from this device to avoid damage.

Note: The devices must be within range (32.8 ft. or 9 m) and powered on.

1.Turn on the headset. If connecting for the first time, the headphone will
enter the pairing mode automatically after it is powered on.

Tip: Once powered on, the white LED flashes blue and red alternately.

2. On your mobile device, enable the Bluetooth feature.

Tip: The Bluetooth feature is usually found in the Setting menu.

Detachable Earcups

Adjust the headband to fit your head.

3. Select your headphones from the device list.

Choose “E8” to connect

Detachable, magnetic earcups allow for easy replacement and cleaning.

Hearing Safety

E8

Tip: Once paired, you hear “Paired” and see the indicator flash blue slowly.

Danger

• To avoid hearing damage, limit the time you use headphones

at high volume and set the volume to a safe level. The louder
the volume, the shorter the safe listening time is.

FAQ

Q1: My Bluetooth headphones do not switch on.

●The battery level is low. Charge the headphones.

Q2: I have difficulty to pair my device to the headset.

●Make sure the headset is powered on.

●Make sure your device’s Bluetooth feature is on.

●Make sure the headset is not paired by another device. If it is, turn the headset on and press

‘+’ (volume up) and ‘-’ (volume down) at the same time to clear the headset pairing list. Then,
pair again.

●Move your device closer to the headphones and away from any interference or obstructions.

Q3: My Bluetooth headphones are connected to a Bluetooth stereo enabled
mobile phone, but music only plays on the mobile phone speaker.

●Refer to the user manual of your mobile phone. Select to listen to music through the
headphones.

Q4: The audio quality is poor and crackling noise can be heard.

●The Bluetooth device is out of range. Reduce the distance between your headphones and
Bluetooth device, or remove obstacles between them.

EN-1 EN-2 EN-3 EN-4 EN-5