Pro-Class Blender
Model No.: C700-PRO
COSORI SUPPORT:
Mon - Fri 9:00 AM - 5:00 PM PST
(888) 402-1684 | support@cosori.com
Thank You.
We thank you for purchasing a new Pro-Class Blender by Cosori, and we’re excited to
see what you’ll cook up very soon.
We’re looking forward with you to preparing many fresh meals in your kitchen with
minimal operation or eort. And when we say “with you,” we mean it—our helpful
customer support team is available by phone at 888-402-1684 or by email at
support@cosori.com. We’re here to lend an ear to your questions and concerns (or your
joy over a successful recipe). Happy cooking!
Show Us What You’re Making
We hope this has been helpful to you. We can’t wait to see your beautiful results, and
we think you’ll want to share glam shots! Others already in the community await your
uploads—just pick your platform of choice below. Snap, hashtag, and tag away, Cosori
chef!
#iCookCosori
@cosoricooks
Cosori Appliances
Considering what to cook? Many recipe ideas are available, both from us and the Cosori
community.
More Cosori Products
Lastly, if you’re happy with this blender, the line doesn’t stop here. Check out www.cosori.
com for a line of all our beautiful and thoughtfully designed cookware. They might be
right at home in your kitchen, too!
3
Table of Contents
Safety Information
Function Diagram
Set-up
Operation
Helpful Hints for Blending
Care & Maintenance
Troubleshooting
Specications
Warranty
Customer Support
Package Contents
1 x Pro-Class Blender
1 x Tamper
1 x Cleaning Brush
1 x Travel Bottle (27 oz)
1 x User Manual
5
7
9
10
12
13
14
16
16
17
4
Safety Information
IMPORTANT SAFEGUARDS
Please read, understand, and
comply with all the instructions
provided in this manual before
using the device. Failure to comply
with the instructions given in this
manual and/or using the device
in ways other than the ones
mentioned in this manual may
result in serious injury and/or
damage to the product.
Safety Use & Care
• Read all instructions before
using this appliance.
• Check if the local power supply
voltage matches the voltage
indicated on this appliance
before use.
• DO NOT place any part of this
appliance on or near a hot gas
or electric burner, or in a heated
oven.
• DO NOT let cord hang over
edge of table or counter; doing
so may present a tripping hazard
which can result in injury or
damage to the blender.
• DO NOT operate if the
appliance has a damaged cord,
or if the appliance itself has
malfunctioned or has been
damaged. Contact customer
support immediately if the
appliance malfunctions.
• Avoid contact with any moving
parts on the appliance.
• DO NOT leave foreign objects,
such as spoons, forks, knives or
the measuring cap, in the pitcher
as this will damage the blades
and other components when
operating the appliance; doing
so may cause injury.
• Handle this appliance with care;
the blades are sharp.
• DO NOT use attachments from
other kitchen appliances on this
blender; doing so may cause re,
electric shock, or injury.
• DO NOT use any objects to
block the air vent at bottom of
the base while the blender is
operating.
• The pitcher should not be more
than two-thirds full when using
the tamper. DO NOT exceed 30
seconds of continuous blending
while using the tamper.
• When making nut butters or oil
based foods, do not process for
more than one minute after the
mixture starts circulating. Overprocessing can cause dangerous
overheating.
• DO NOT start on speeds
above the ‘MED’ setting with
hot liquids; escaping steam or
splashes may scald and cause
injury. Always start blending on
low speed, then slowly increase
to ‘HI.’
• CAUTION: The blender can heat
room temperature liquids and
ingredients up to 140°F or higher
when operating for extended
periods of time. Use caution
when handling hot liquids.
• Make sure all controls are turned
o and the blender is unplugged
before putting on or taking o
parts, and before cleaning.
• Never leave the appliance
5
unattended while it is on.
• DO NOT immerse the blender
base or power cord in water
or other liquids, doing so may
cause electric shock or injury.
• DO NOT put hands or other
objects into the pitcher while the
blender is operating. Keep hands
and utensils out of the pitcher
while blending to avoid the risk of
severe injury or damage to the
blender.
• If necessary, only use a rubber
spatula or wooden spoon to
remove food from the sides of
the pitcher. Make sure to turn
the power o and unplug the
blender from the electrical outlet
before scraping the sides of the
pitcher.
• Always operate blender with the
lid in place.
• DO NOT blend non-food items
in the blender.
• DO NOT open the lid until the
blades come to a complete stop
to avoid hazard or injury.
• To extend product lifetime, it
is recommended to run the
blender for no more than 6
minutes when blending on the
‘HI’ setting. Allow the blender
to rest for at least 10 minutes
before starting your next recipe.
• This appliance should not be
used by children ages 8 and
younger or by persons with
reduced physical, sensory, or
mental capabilities or lack of
experience and knowledge,
unless they are supervised or
are given instruction concerning
use of this appliance in a safe
way and understand the hazards
involved. Children shall not play
6
with the appliance.
• DO NOT allow children to clean
or maintain the blender.
• DO NOT use outdoors.
• DO NOT attempt to remove the
blade assembly on the blender
for any reason. Doing so will void
the warranty for this appliance.
• DO NOT attempt to use
the Pro-Class Blender blade
assembly on another blender.
• DO NOT remove or replace the
blade assembly from another
blender to your Pro-Class
Blender.
• DO NOT operate the blender
if the blade assembly is not
properly attached.
• DO NOT ll the pitcher above
the MAX level to avoid the risk
of injury due to damage to the
cover or pitcher.
NOTE FOR PLUG:
This appliance has a polarized
plug (one blade is wider than
the other). To reduce the risk of
electric shock, this plug will t in
a polarized outlet only one way.
If the plug does not t fully in the
outlet, reverse the plug. If it still
does not t, contact a qualied
electrician. Do not modify the
plug in any way.
SAVE THESE
INSTRUCTIONS
HOUSEHOLD USE ONLY
Function Diagram
13
14
8
Top View Bottom View
3
4
5
6
7
D
E
11
M
P
U
O
S
E
S
L
U
P
N
O
I
H
F
O
1210
F
15
18
1
16
2
17
9
Product Diagram
1. Measuring Cap
2. Lid
3. Pitcher
4. Handle
5. Blade Assembly
6. Drive Socket
7. Support Pad
8. Pitcher Sensor
9. Motor Base
10. Soup/Pulse Switch
11. Variable Speed Control
12. On/O Switch
13. Reset Button
14. Anti-Skid Pads
15. Power Cord
16. Tamper
17. Cleaning Brush
18. 27 oz. Travel Bottle
7
Control Panel
Button/Dial Cause
On/O Switch Controls the power to the blender. When the
blender is plugged in, it will beep when turned
on to indicate that it is on standby mode.
Variable Speed Control Use the Variable Speed Control to select a
blending speed to best mix your ingredients.
The blender will run until you set the dial to
‘STOP.’ Please note that the Soup/Pulse
Switch must be in the neutral position for the
blender to work.
CAUTION: The blender can heat room
temperature liquids and ingredients up to
140°F or higher when operating for extended
periods of time.
Soup/Pulse Switch SOUP: The ‘SOUP’ function will set the blender
to run on low speed for 15 seconds, then
continue to run on high speed. The blender will
automatically turn o after 6 minutes. Flip the
switch back to the neutral position to turn o
this function.
NOTE: The Variable Speed Control does not
work when the Soup function is on.
PULSE: Press and hold down the switch to
activate the ‘PULSE’ function. The blender will
run at high speed until the switch is released.
Blending Times & Temperatures
Low Medium High Soup
3 min. 84°F 111°F 121°F 103°F
6 min. 96°F 135°F 158°F 142°F
NOTE:
• To extend product lifetime, it is
recommended to run the blender
for no more than 6 minutes when
blending on the ‘HI’ setting. Allow
the blender to rest for at least 10
minutes before starting your next
recipe.
• These temperatures are based on
blending 5 cups of water at room
temperature.
8
Set-Up
Before First Use
Follow the steps below to eectively
clean the pitcher and break in the motor
inside the blender.
1. Remove all packaging and labels from
the blender. Inspect the blender for
damage and check to see if all parts
are included.
2. Fill the pitcher halfway with
warm, soapy water.
5-10 sec
4. Set the On/O Switch to the
‘ON’ position and turn the
Variable Speed Control to the
rst level for 5-10 seconds.
30 sec
5. Slowly turn the Variable Speed
Control to the ‘HI’ setting and
allow the blender to run for 30
seconds.
3. Place the pitcher on the motor
base, and plug in the base.
6. Rinse all parts thoroughly and allow
them to dry completely.
9
Operation
Blending Mixtures
WARNING:
DO NOT put hands or other objects
into the pitcher while the blender
is operating; doing so may result in
serious injury and may damage the
blender.
1. Place the motor base on a at,
level surface.
3. Place all ingredients into the
container. For best results, food
should be cut into ½ inch pieces and
the ingredients should not exceed
the MAX level on the container.
4. Place the lid onto the pitcher.
To completely close the pitcher,
align the two slots on the
measuring cap with the lid,
then turn the cap clockwise.
The arrows on the measuring
cap should align with the lock
symbols on the lid.
M
E
D
2. Place the pitcher onto the base.
The pitcher should press down
on the pitcher sensor.
10
5. Plug the blender into an
electrical outlet and set the On/
O switch to the ‘ON’ position.
10 sec
8. Unplug the blender and remove
the pitcher.
6. Turn the Variable Speed Control
dial to the rst level and allow
the mixture to blend for 10
seconds, then slowly move
the dial to your desired level.
You can also use the Soup/
Pulse switch to blend your
ingredients.
7. When all of your ingredients
have been blended to your
desired consistency, turn the
Variable Speed Control to
‘STOP’, and set the On/O
Switch to the ‘OFF’ position.
9. Serve immediately, or pour your
creation into the included travel
bottle to take it on the go.
10. Clean all parts and accessories
immediately after each use.
NOTE:
• The blender may emit a faint odor
when being used for the rst time;
this is normal.
• CAUTION: Moving parts may
become hot with extended use.
Allow moving parts to cool down
before handling.
• DO NOT remove the pitcher
while the motor is on. Make sure
the blender is not running before
removing the pitcher.
11
Helpful Hints for
Blending
Filling up your Container
The following tips can help you eectively
create blended creations with your new
blender.
1. Add liquids or yogurt rst (Add liquid
in small increments until you have
reached your desired consistency.)
2. Smaller ingredients like berries or
nuts in the middle.
3. Place ice or larger ingredients last.
1. While the blender is operating,
set the blender to the lowest
speed setting.
2. Remove the measuring cap
from the lid and insert the
tamper through the opening.
NOTE:
It might seem that ice should sit on
the bottom right by the blades, but
the weight of ice is best utilized when
it rests atop all other ingredients. For
that reason, cubed ice (as opposed to
crushed ice) also works better.
Using the Tamper
The tamper allows you to accelerate the
process of blending thick and/or frozen
mixtures and prevents air pockets from
forming. Only insert the tamper through
the lid opening as you create nut butters,
fruits purée.
12
3. Use the tamper to push out any air
pockets in the mixtures. Push down
any unblended foods in the pitcher. If
necessary, point the tamper toward
the sides and corners of the pitcher.
4. Remove the tamper from the pitcher
and replace the measuring cap.
NOTE:
• The pitcher should not be more than
two-thirds full when using the tamper.
• DO NOT use the tamper for more
than 30 consecutive seconds to avoid
overheating.
• DO NOT try to force the entire tamper
through the lid opening. The splash guard
on the tamper and the lid ensure that
the tamper will not make contact with
the blades.
Other Helpful Tips
• Always make sure the lid is secured to
the pitcher.
• When making nut butters or oil based
foods, do not process for more than
one minute after the mixture starts
circulating. Over-processing can cause
the blender to overheat and possibly
malfunction.
• For best results, blend on ‘HI’ to
achieve the most uniform consistency
for your mixtures.
• Blending on the lowest speed setting
for too long will cause the motor to
overheat.
• When blending cold drinks like
margaritas or smoothies, make sure
ice cubes are ½ inch with a 2:3 ratio of
ice to liquid in the container.
• Frozen fruit makes a great
replacement for ice and adds
sweetness to your mixtures.
• Always make sure ingredients are room
temperature before blending. Allow
hot ingredients to cool for 3-5 minutes
before placing them into the pitcher.
• Make sure to use no more than 7
ounces (200 g) of ingredients when
grinding foods like coee beans.
• If necessary, use a rubber spatula or a
wooden spoon to remove food from
the sides of the container. Make sure
to turn the power o and unplug the
blender from the electrical outlet
before scraping the sides of the
pitcher.
• To extend product lifetime, it is
recommended to run the blender for
no more than 6 minutes when blending
on the ‘HI’ setting. Allow the blender
to rest for at least 10 minutes before
starting your next recipe.
Care &
Maintenance
Cleaning the Pitcher
1. After use, reassemble the blender
and ll the pitcher with 2 cups of
warm water along with a couple
drops of dish detergent.
2. Turn on the blender and turn the
Variable Speed Control for low
speed. Slowly increase the speed
to ‘HI’ and allow it to run for 30
seconds. Alternatively, you can hold
down the ‘PULSE’ switch for 30
seconds.
3. Turn o the blender and remove the
pitcher. Rinse the pitcher under clean
running water.
4. Allow the pitcher to dry before
storing.
NOTE:
For added convenience, the pitcher,
lid, measuring cap, and tamper can
all be placed on the top rack of the
dishwasher for easy cleanup.
Sanitization for Long-Term
Storage
1. Follow the cleaning instructions
above.
2. Fill the pitcher halfway with clean
water along with 1½ teaspoons of
bleach.
3. Place the lid and measuring cap on
top of the pitcher; make sure the lid is
secured onto the pitcher.
4. Place the pitcher onto the motor
base.
5. Turn on the blender and turn the
Variable Speed Control to the lowest
speed setting. Slowly increase the
speed to ‘HI’ and allow it to run for 30
seconds.
13
6. Turn o the blender and pour the
mixture out.
7. Allow the pitcher to air dry. DO NOT
rinse the pitcher after sanitizing.
Cleaning the Lid, Measuring
Cap, and Tamper:
The lid, measuring cap, and tamper can
all be washed with warm soapy water.
Rinse all components under clean running
water and dry with a clean cloth.
NOTE:
The pitcher, lid, measuring cap, and
tamper can also be placed on the
top rack of the dishwasher for easy
cleanup.
Cleaning the Motor Base
WARNING:
Always unplug the motor base before
cleaning. Failure to do so may result in
electrical shock or possible injury and
even death. DO NOT immerse the
blender base in water or liquids, doing
so may damage the appliance.
1. Unplug the motor base.
2. Use a damp clean cloth or sponge to
wipe o any excess food on the base.
3. Immediately dry the base with a dry
clean cloth.
4. If necessary, clean the switches with
a moistened cotton swab to remove
any buildup in the grooves of the
switches.
Troubleshooting
Automatic Overload
Protection
This blender is equipped with automatic
overload protection to prevent the motor
from overheating. If the motor suddenly
shuts o while the blender is operating
follow the steps below.
1. Turn the Variable Speed Control
to ‘STOP’, then set the On/O
switch to ‘OFF.’ Remove the
pitcher and set aside.
2. Unplug the blender and allow it to
cool down for 5-10 minutes.
3. Turn the base over to reveal the
underside of the blender, then
press the reset button.
14
General Troubleshooting
Problem Cause Solution
Blender does not
power on.
Blender stops mixing
ingredients, unevenly
chops ingredients,
or suddenly turns o
while operating.
Food spills out of
container while
blending on ‘HI.’
Blade assembly in
pitcher is loose.
Blender emits a
strange odor while
operating.
Blender continues to
emit a strange odor
while in operation.
Blender continuously
emits a strong
burning odor after
multiple uses.
Blender leaves a black
residue on working
surface after blending.
Power cord is not
connected to a powered
electrical outlet.
On/O switch is not set to
the ‘ON’ position.
Air pockets have formed in
the mixture.
Too much food inside the
pitcher.
The motor has
overheated.
The lid is not secured
properly or measuring cap
is not placed onto the lid.
Retainer nut holding blade
is loose or broken.
Motor is heating up for the
rst time.
Motor is starting to
overheat.
Blender may be broken or
defective.
Connect power cord to
powered electrical outlet.
Turn switch to ‘ON’ position.
Use the tamper to push out
any air pockets.
Take out food until ingredients
pitcher is only lled up to the
MAX line.
Turn o and unplug the
blender, allow it to cool down,
and press the reset button
(see Automatic Overload
Protection).
Ensure that the lid and
measuring cap are properly
secured onto the pitcher. Start
blending on the lowest speed
setting, then slowly increase
the speed to ‘HI.’
Discontinue use and
immediately contact customer
service. DO NOT attempt to
x the blade assembly.
Set the variable speed dial to
low setting, then slowly turn
the dial to your desired speed.
Unplug the blender and allow it
to cool down for 5-10 minutes.
Contact Customer Support.
15
Specifications
Power Supply: AC 120V / 60Hz
Rated Power: 1500W
Motor Speed: 30000 RPM
Capacity: 0.5 gal. (2 L)
Warranty
Cosori warrants all products to be of the
highest quality in material, craftsmanship
and service for a minimum of 1 year,
eective from the date of purchase.
Under the limited warranty, Cosori will
replace or refund any product found to
be defective due to manufacturer aws
based on eligibility. Refunds will be issued
within 30 days of the date of purchase,
otherwise, Cosori will replace products
determined to be defective for the
remaining warranty period. This warranty
extends only to personal use and does
not extend to any product that has been
used for commercial use, rental use, or
any other use in which the product is not
intended for. There are no warranties
other than that expressly set forth with
each product. This warranty is nontransferrable. Cosori is not responsible
in any way for any damages, losses or
inconveniences caused by equipment
failure or by user negligence, abuse, or
use noncompliant with the user manual
or any additional safety, use, or warnings
included in the product packaging and
manual.
This warranty does not apply to the
following:
• Damage due to abuse, accident,
alteration, misuse, tampering or
vandalism.
• Improper or inadequate maintenance.
• Damage in return transit.
• Unsupervised use by children under 18
years of age.
Cosori and its subsidiaries assume no
liability for damage caused by the use of
the product other than for its intended
use or as instructed above and in the
user manual. Some states do not allow
this exclusion or limitation of incidental
or consequential losses so the foregoing
disclaimer may not apply to you. This
warranty gives you specic legal rights
and you may also have other rights which
may vary from state to state.
Furthermore, Cosori is not liable for
incidental or consequential damages of
any nature resulting from the use of this
product.
16
Customer Support
Should you encounter any issues or
have any questions regarding your
new product, feel free to contact our
helpful Customer Support Team. Your
satisfaction is our goal!
CUSTOMER SUPPORT
Cosori Corporation
1202 N. Miller St. Suite A
Anaheim, CA 92806
Phone: (888) 402-1684
Email: support@cosori.com
SUPPORT HOURS
Monday - Friday: 9:00 am - 5:00 pm PST
*Please have your order conrmation
number ready before contacting
customer support.
17
18
COSORI SUPPORT:
Mon - Fri 9:00 AM - 5:00 PM PST
(888) 402-1684 | support@cosori.com
20
Loading...