Cornelius CCM0322AH1 User Manual
NORDIC CCM0322 SERIES
MODULAR CUBED ICE MAKER
Ice maker shown on B322AP bin
FEATURES
High-yield – Produces up to 349 lbs. (159 Kgs.) of ice/day
Durable – Constructed from corrosion-resistant stainless steel
Antimicrobial – Built-in Agion Antimicrobial product protection effective against mold, mildew, and fungus
Small footprint – Ultra low-profile - only 23" (584 mm) tall and 22" (558 mm) wide
Smart – Harvest assist reduces utility consumption
Customizable – Choice of full or half cube size
Easy to maintain – No air filter to clean or replace
Protected by Agion
Agion is a trademark of Agion Technologies, Wakefield, MA.
6.00"
(152mm)
minimum
wall
clearance
side & rear
Front of Machine
Ice dispense area to "bin"
Rear View Water Cooled
22.02
R.H. Side View Air Cooled
24.14"
(613mm)
Air flow "out"
Rear View Air Cooled
22.02"
(559mm)
MODEL NO.
CCM0322A*1
CCM0322A*5
Top View
23.00"
(584mm)
(264mm)
Kilowatts
Used per
100 lbs.
of ice 90°
Air / 70°
Water
10.40"
8.34"
(212mm)
5.34"
(136mm)
1.00"
(25mm)
Rejection
2.97"
(75mm)
Heat
(Btuh)
Condenser
air "in"
16.00"
(406mm)
7/8" (22mm) hole for electrical connections
Icemaker potable water in 3/8" (10mm) FPT
Icemaker water out 3/4" (19mm) FPT
Electrical
Rating
Circuit
(95mm)
Cond.
Unit
21.50"
(546mm)
0.85" (22mm)
3.72"
1.07"
(27mm)
Ice Prod.
per 24 hrs.
at 70° Air /
50° Water
lbs. (Kgs.)
CONDENSER WATER IN
0.38
3/8" FPT
2.68
2.97
5.80
5.68
4.18
4.40
16.00
7/8" HOLE FOR
ELECTRICAL CONNECTIONS
ICE MAKER WATER OUT 3/4" FPT
CONDENSER WATER OUT 1/2" FPT
Ice Prod.
per 24 hrs.
at 90° Air /
70° Water
lbs. (Kgs.)
HARDWARE FOR MOUNTING
TO BIN OR DISPENSER
ICEMAKER POTABLE
WATER IN 3/8" FPT
Water Used-Gals.
(Ltrs.) per 100 lbs. of
ice 90° Air / 70° Water
Ice Prod.
Use
23.26"
(591mm)
Cond.
Use
Air 334 (152) 249 (113) 27 (102) n/a 8.1 6228 115/60/1 13.8
Air 301 (137) 214 (97) 28.3 (107) n/a 7.2 4990 220-
240/50/1
.38" (10mm)
Hardware for mounting
to bin or dispenser
Min.
Amp.
6.6
* Represents cube size. For full cube substitute an “F”, for half cube substitute an “H”.
See Bin specification sheet for information on Storage bins.
1. 90°/70° figures are rated in accordance with ARI Standard 810. All remaining points are mathematical estimates.
2. All specifications and performance data are subject to normal manufacturing variances.
OPERATING LIMITS
Ambient Temp. Range Air & Water 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 110°F (4.5° - 43°C)
Water Pressure Ice Maker Water in
Condenser Inlet Water
(Water cooled only)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
TECHNICAL SPECIFICATIONS
NUMBER OF WIRES ........... 3
MAX. FUSE SIZE .............. 16
SHIPPING WEIGHT LBS (KGS.) .. Air: 150 (68)
Water: 160 (73)
AGENCY LISTINGS ............
Cube Size: Width Depth Heigth
Full 7/8" (22mm) 7/8" (22mm) 7/8" (22mm)
Half 3/8" (10mm) 7/8" (22mm) 7/8" (22mm)
© 2016 CORNELIUS
CG5056-0516
IN THE U.S.A.
Ph: 800.238.3600
Fax: 800.258.0255
OUTSIDE THE U.S.A.
Ph: 763.488.8200
Email: webmaster@cornelius.com
101 Broadway Street West
Osseo, MN 55369
www.cornelius.com
For more information or to place an order, contact your sales representative or authorized distributor.
Loading...