Cooper-Atkins 11078 User Manual

ENTERPRISE

Wi-Fi (802.11 b/g/n) Transmitters

WIRELESS

MONITORING

OVERVIEW

TempTrak™ Wi-Fi transmitters are high speed wireless modules with PEAPv0 enterprise security, capable of collecting, storing and transmitting
data wirelessly over a standard 802.11 b/g/n (Wi-Fi – RF Frequency 2.4 to 2.497 GHz) with UDP protocol. The transmitter passes information to the
TempTrak™ application which can be located on any Wi-Fi-enabled network. Each transmitter monitors against preset conditions that are defined by
the user and can provide audio and visual alerts. Additional alerts can be provided through a variety of methods such as pager, cellphone, and e-mail.
Information recorded (in °F and °C) to the database is time-stamped and cannot be altered through the user interface.

All transmitters can be configured for Wi-Fi and server networks as well as sample transmit intervals. Configuration can be performed either at the
factory or in the field. The transmitter will connect to a Wi-Fi IP network and send data to the designated server. Both Wi-Fi (802.11 b/g/n) and 900 MHz
TempTrak™ transmitters can communicate within a single TempTrak™ installation. *On-site NIST traceability available.

SECURITY SUPPORT

Our new Wi-Fi transmitters support the following security modes: WEP, WPA-PSK, WPA2-PSK, WPA2-Enterprise with PEAPv0 and EAP-MSCHAPv2.
PEAPv0 is the ultimate in wireless security, protecting customers’ data transferred between clients and servers, preventing unwanted access to secured
networks even if the threat is posing as a transmitter. PEAPv0 with EAP-MSCHAPv2 is the most common form of PEAP in use and one of the most
widely supported EAP standards in the world. PEAP reduces the number of SSIDs required because the transmitters can reside on a PEAP network
normally reserved for internal data transfer.

FEATURES

• Connects to existing Wi-Fi IP network

• Speed: Wi-Fi 802.11 b/g/n 72 Mbit/sec

• Enterprise Security: PEAPv0 with EAP-MSCHAPv2 (PEAP)

• Radio Protocol: IEEE 802.11 b/g/n compatible

• RF Frequency: 2.4 to 2.497 GHz

• Operating Environment: 0° to 140°F (-17° to 60°C), up to 95% RH

• Battery: (2) AA Lithium (included)

• Battery Life: 14-15 months (based upon a 15 minute transmit and
sample cycle)

• External power supply (Micro-USB) with battery backup

• On-transmitter buffer storage size of 4,096 samples

• Visual and audio alarm indicators - can be cleared with reset feature

• ABS plastic enclosure

• Wall-mounting: DualLock™ tape or screw-mount

• One year warranty

• Certifications: FCC, CE, IC, and RoHS compliant

SPECIFICATIONS

#11078 Dual External Temperature Transmitter

• Supports up to two external temperature probes

• Temperature Range: -328° to 572°F (-200° to 300°C)

• Accuracy: ±1°F (±0.5°C)

#11079 Internal Temperature/Humidity Transmitter

• Supports one internal temperature sensor and one internal relative
humidity sensor

• Temperature Range: -4° to 140°F (-20° to 60°C)

• Accuracy: ±0.7°F (±0.4°C)

• Relative Humidity Range: 0 to 95%

• Relative Humidity Accuracy: ±3%

BENEFITS

• Utilizes infrastructure already in facility

• Optimized for network speed

• Higher security network protects real-time data traffic

• Works efficiently with all access points

• Industry standard RF frequency

• Can be placed in a variety of environments

• Common battery size

• Less frequent battery replacements

• Reconfigure Wi-Fi transmitters over the air

• Reduces maintenance

• Ensures continuous data collection in the event of network outage

• Ensures no alerts go unanswered

• Durable casing protects inner circuitry

• Ensures secure mounting for different equipment

#11089 Analog Transmitter

• Supports two external instruments via terminal blocks

• Works in conjunction with a digital output device

• Current: 0 to 20 milliamp

• 0 to 10 volts

#11109 Contact Transmitter

• Reed Switch activates with magnet

• Terminal block allows for remote signal activation

Transmitter Dimensions:

4.25” x 2.5” x 1.125” (108mm x 64mm x 29mm)

Dual External Temperature Transmitter
#11078

Cooper-Atkins Corporation | Accuracy to the Highest Degree

888-533-6900 | 513-793-5366 | Fax: [phone] | www.cooper-atkins.com

Internal Temperature/ Humidity Transmitter
#11079

Analog Transmitter
#11089

Contact Transmitter
#11109

67-1435

V0715