Temperature
Monitoring
Wi-Fi (802.11 b/g)
Wireless Transmitters
Wireless
#10078
External Temperature
Transmitter
2.5”
(64 mm)
4.25”
(108 mm)
#10079
Internal Temperature /
Humidity Transmitter
#10089
Analog Transmitter
#10109
Contact Transmitter
1.125”
(29 mm)
Specifications
#10078 External Temperature Transmitter
• Supports up to two external temperature probes
• Temperature Range: -328° to 500°F (-200° to 260°C)
• Accuracy: ±1F° (±0.5C°)
#10079 Internal Temperature / Humidity Transmitter
• Supports one internal temperature sensor, and one internal
relative humidity sensor
• Temperature Range: 0° to 140°F (-17° to 60°C)
• Accuracy: ±1F° (±0.5C°)
• Relative Humidity Range: 0 - 95%
• Relative Humidity Accuracy: ±3.0%
#10089 Analog Transmitter
• Supports two external instruments via terminal blocks
• Works in conjunction with a digital output device
• Current: 4-20 millamp
• Input: 0 - 5 volts and 0 - 10 volts
#10109 Contact Transmitter
• Read switch activates with magnet
• Terminal block allows for remote signal activation
Features
• Will connect to existing Wi-Fi IP network
• Radio Protocol: IEEE 801.11 b/g/n compatible
• RF Frequency: 2.4 to 2.497 GHz
• Operating Environment: 0° to 140°F (-17° to 60°C), up to
95% RH
• On-board memory back-up
• Battery: (2) AA Lithium (included)
• Dimensions: 4.25” x 2.5” x 1.125” (108 x 64 x 29 mm)
• Weight: 4 oz (113 g)
• Wall-mounting: DualLock™ tape or screw-mount
• One year warranty
All transmitters can be congured for Wi-Fi and server
networks as well as sample transmit intervals. Conguration
can be performed either at the factory or in the eld.
When congured properly the unit will connect to a Wi-Fi
IP network and send data to the designated server. Both
Wi-Fi (802.11 b/g) and 900 MHz TempTrak transmitters can
communicate within a single TempTrak installation.
11353 Reed Hartman Hwy, Suite 110 • Cincinnati, OH 45241-2929 U.S.A.
Cooper-Atkins Corporation
888-533-6900 • 513-793-5366 • Fax: 513-793-4895 • www.cooper-atkins.com
Measuring Success Since 1885
67-1185
V0911