Setting Up RRAS
RRAS Configuration Overview for
Windows XP
Note: This document contains sample procedures to assist you in quickly enabling
RRAS and installing a modem in RRAS. There are several ways in which to
do this. If you are familiar with a different method, feel free to use your own
method.
This is not a complete procedure for configuring RRAS. For additional
information, use the Microsoft help system or contact Microsoft Corporation
for more in depth RRAS support.
Use the following procedure as a reference to set up RRAS in Windows XP.
1. Open the Control Panel (from the Start button) and select Administrativ e Tools.
2. Double-click on the Services icon.
RRAS Configuration Overview for Windows XP 1
Setting Up RRAS
3. Right-click on the Routing and Remote Access entry and select Properties.
4. Select Automatic from the Startup type drop list.
5. Select the Start button.
RRAS Configuration Overview for Windows XP 2
Setting Up RRAS
6. Select Ok to close the Routing and Remote Access Properties (Local Computer)
window.
7. Close the Services control panel.
8. Close the Administrative Tools Control
panel.
RRAS Configuration Overview for Windows XP 3
Adding Modem to RRAS
Use the following procedure as a reference if you need assistance with setting up
incoming calls on a modem port.
1. Open the Control Panel, right-click the Network Connections icon, and select
Adding Modem to RRAS
Open.
2. Right-click the Incoming Connections icon and select Properties.
RRAS Configuration Overview for Windows XP 4
Adding Modem to RRAS
3. Select the modem or modems that you want to setting up incoming calls upon.
4. Select the Users tab and select the users that are permitted dial-in permission.
Note: If necessary, use the Add button to add addition users.
RRAS Configuration Overview for Windows XP 5
Adding Modem to RRAS
5. Select the Networking tab, configure any necessary protocols, and select Ok.
6. Close the Network Connections control panel.
Trademark Notices
Comtrol is a trademark of Comtrol Corporation.
Windows XP and Microsoft are registered trademarks of Microsoft Corporation.
Other product names mentioned herein may be trademarks and/or registered
trademarks of their respective owners.
First Edition, May 9, 2003
Copyright © 2003. Comtrol Corporation.
All Rights Reserved.
Comtrol Corporation makes no representations or warranties with regard to the
contents of this document or to the suitability of the Comtrol product for any
particular purpose. Specifications subject to change without notice. Some software
or features may not be available at the time of publication. Contact your reseller
for current product information.
Document Number: 2000306 Rev. A
RRAS Configuration Overview for Windows XP 6
Loading...