C:\docs\sirio-all\gb\a08356ca-cop.cdr
luned 7 febbraio 2000 16.09.16
Compuprint Information
Thanks
Your printer is a reliable working equipment that will be very useful in your
daily job.
Our printers have been designed to be compact and respectful of the work
environment. They offer a wide range o f features and multiple functions that
confirm the high technological level reached by the Compuprint S.p.A .
To maintain these printing performances unchanged in the long run,
Compuprint has developed specific consumable accessories for each printer
type (for example: ribbon cartridges fo r dot matrix printers, toner and OPC
cartridges for laser printers, bubble ink jet cartridges for inkjet printers) that
assure an excellent operation with high printing quality level reliability.
Compuprint recommends to use only its
original packaging (identified by its holographic label) .
proper use of the printer at quality level stated in th e product characteristics
can be assured. All typical usage problems related to not certified consumab les
may be avoided, such as an overall quality print level degradation and, often,
the reduction of the product life due to the fact that the proper working
conditions for the print heads, OPC cartridge and other printer parts are not
assured.
Moreover, Compuprint does not only certify its consumables in terms of
working conditions but also carefully controls their compliance with the
international standard rules concerning:
•
no cancerous materials;
for choosing this printer.
original consumables with
In this way, a
•
no inflammability of the plastic materials;
•
other standards
Compuprint advices the customers not to use products for which the
compliance to this safety rules are not warranted.
Finally seek your dealer or contact a Compuprint o ffice and be sure that are
provided you the original Com p uprint consumables.
A78408356-0021
FCC Notes
FCC Notes
This equipment has been tested and found to comply w ith t he limit s for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and
can radiate radio freq uency energy and, if not in stalled and used in acco rdance
with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occurin a particular installation. If this equipment does cause harmful
interference to radio or te levisi on recepti on, which can be dete rmined b y turning
the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receivin g antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that
to which the recei ver is connected
•
Consult the dealer or an experienced radio/TV technician for help.
A shielded Centronics IEEE1284 compliant bi-directional parallel cable,
maximum length 3 meters (10 feet), and a shielded RS-232 serial cable,
maximum length 15 meters (50 feet), are necessary for this device to m eet the
requirements of a Class B digital device pu rsuant to p art 15 of t he FCC r ules.
The above specified cables are readily available as Personal Computer or
Peripheral accessories from multiple retail outlets. Please consult your
dealer for details concerning such cables and also for information about FCC
rules for digital de vices.
Changes or modifications to the device covered by this manual, which are not
expressly approved by the party responsible for compliance, could void the
user’s authority under the FCC rules to operate the equipment.
Canadian D.O.C. Radio Interference Regulation
This digital apparatus complies with the Canadian ICES-003 Class B limits
for radio frequency emissions.
Cet appareil numérique est conforme aux limites de Class B de la norme NMB003 du Canada.
EEC Regulations
This equipment conforms to the EEC Directive 89/392 (the sound pressure,
measured according to ISO 7779, does not exceed 70 dBA).