Comnet EXP100-R, EXP100-C User Manual

INSTALLATION AND OPERATION MANUAL

EXP100

EXPANSION MODULE FOR USE
WITH FDW1000 WIEGAND MODULE

When used with the FDW1000 series of fiber optic Wiegand extender modules,
the ComNet™ EXP100 Expansion Module enables additional Wiegand control
panels, readers, and associated door/gate hardware to be added to the network.
The 2-wire RS-485 data interface between the expansion modules provides a secure
and completely supervised connection, with excellent immunity to electrical noise
and interference. Up to 8 EXP100s can be used in a drop-and-repeat/daisy-chain
topology, and each EXP100 may be set to a unique address (1 thru 15) via DIP-switch
selection.

An auxiliary I/O (input/output) interface is available for ascertaining door, gate, and
control panel status and signaling, and a relay interface provides the door strike or
gate activation functions. See Figures 10 and 11 beginning on Page 5 for a guide
to the I/Os and Relay Controls.

The EXP100 is supplied as a remote unit for door or gate locations or a central unit
for control panel installation. See Figures 3 through 5 on Page 3 for Central and
Remote Dip Switch Settings.

These extenders are designed for long-term, reliable operation in harsh industrial
environments, and a fault-specific LED indicator is provided for rapidly ascertaining
the operating status of the extender and the link. See Figure 17 on Page 12 for an
explanation of LED indicators.

Packaged in a rugged aluminum housing, the EXP100 is designed for shelf or
surface mounting. See Figure A on Page 12 for mounting instructions.

See Figures 1 – 17 for complete installation details.

Rev. 04.18.13

INS_EXP100_REV– 12/04/12 PAGE 1

INSTALLATION AND OPERATION MANUAL EXP100

FIGURE 1 – EXP100/C CENTRAL DATA EXTENDER

BLACK

BLACK& WHITE/RED

Power Supply:
Input:
8–16 VDC @ 200mA Max
Output:
+5 VDC @ 100mA

18–16VDC

2GND

STATUS LED

EXP100/C
CENTRAL

EXPANSION

MODULE

1RS-485(+)

2RS-485(–)

3

4
5
6LED IN

7D1/DOUT

8D0/COUT

Power Connections Relay Connections

1 - 8 – 16VDC Power IN (+) 1 N.O. Contact

2 - GND Power IN (–) 2 Common

Data Connections 4 N.O. Contact

1 RS-485(+) RS-485 Input 5 Common

2 RS-485(–) RS-485 Input 6 N.C. Contact

3 +5 VDC OUT - 5V Power Out 7 RS232 Serial Data OUT

4 Analog Input #2 8 RS232 Serial Data IN

5 Analog Input #1 9 Wiegand/RS232 Ground

6 LED Signal Input/Output 10 Auxiliary Digital Output

7 D1/DOUT Wiegand Data 1 Output 11 Digital Input

8 D0/COUT Wiegand Data 0 Output RLY 1 IN 12 Digital Input

RLY 1IN12

3 N.C. Contact

1
2
3
4
5
6
7
8

9
10
11

INS_EXP100_REV– 12/04/12 PAGE 2TECH SUPPORT: 1.888.678.9427

INSTALLATION AND OPERATION MANUAL EXP100

FIGURE 2 – EXP100/R REMOTE DATA EXTENDER

BLACK

BLACK& WHITE/RED

Power Supply:
Input:
8–16 VDC @ 200mA Max
Output:
+5 VDC @ 100mA

18–16VDC

2GND

STATUS LED

1RS-485(+)

2RS-485(–)

EXP100/R

REMOTE

EXPANSION

MODULE

RLY1N.O. 4

RLY1COM5

RLY1N.C. 6

3+5VDC OUT
4
5
6LED OUT
7D1/DIN
8D0/CIN

Power Connections Relay Connections

1 - 8 – 16VDC Power IN (+) 1 N.O. Contact

2 - GND Power IN (–) 2 Common

3 N.C. Contact

Data Connections RLY 1 N.O. 4 N.O. Contact

1 RS-485(+) RS-485 Input RLY 1 COM 5 Common

2 RS-485(–) RS-485 Input RLY 1 N.C. 6 N.C. Contact

3 +5 VDC OUT 5V Power Out 7 RS232 Serial Data OUT

4 Analog Input #4 8 RS232 Serial Data IN

5 Analog Input #3 9 Wiegand/RS232 Ground

6 LED OUT LED Signal Output 10 Auxiliary Digital Input

7 D1/DIN Wiegand Data 1 Input 11 Not Used

8 D0/CIN Wiegand Data 0 Input 12 Not Used

1
2
3

7
8

9
10
11
12

INS_EXP100_REV– 12/04/12 PAGE 3TECH SUPPORT: 1.888.678.9427