Comnet EXP100-R, EXP100-C Specsheet
EXP100 Expansion Module for use
with FDW1000 Wiegand Module
EXP100 Series
HARDENEDINCLUDED
When used with the FDW1000 series of fiber optic Wiegand extender modules, the
ComNet™ EXP100 Expansion Module enables additional Wiegand-based devices to
be added to the network. The 2-wire RS-485 data interface between the expansion
modules provides a secure connection, with excellent immunity to electrical noise and
interference. Up to 8 EXP100s can be used in a drop-and-repeat/daisy-chain topology,
and each EXP100 may be set to a unique address (1 through 15) via DIP-switch
selection. An auxiliary I/O (input/output) interface is available for ascertaining door,
gate, and control panel status and signaling, and a relay interface provides the door
strike or gate activation functions. The EXP100 is supplied as a remote unit for door
or gate locations or a central unit for control panel installation. Packaged in a rugged
aluminum housing, the EXP100 is designed for long-term, reliable operation in harsh
industrial environments.
FEATURES
› RS-485 2-Wire Interface
› Surge resistant
› Wiegand-based reader formats/control panel-compatible
› Secure operation
› Relay interface provides door strike or gate activation
functions
› Voltage transient protection on all power and signal input/
output lines provides protection from power surges and other
voltage transient events.
› No in-field optical adjustments required
› LED fault-specific status indicator for rapidly determining the
operating status of the extender and the link
› IEEE 802.3 compliant
› Small size surface / shelf mount housing: Ideal for use in
those installations where space is at a premium
› Plug-and-play design ensures ease of operation
› Made in the USA
› Lifetime Warranty
APPLICATIONS
› Drop-and-repeat/daisy-chain copper media extension of
up to 8 gates, doors, and readers, when used with the
ComNet FDW1000 Optical Wiegand Data Extender
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
EXP100 Series
SPECIFICATIONS
EXP100 Expansion Module for use
with FDW1000 Wiegand Module
Data
Data Interface RS-485, 2-Wire
Reader - 0 – 30VDC
LED - 0 – 30VDC
Analog - 0 – 5VDC
Power
Input 8 – 16 VDC @ 200 mA Max
Output +5 VDC @ 100 mA
ORDERING INFORMATION
Part Number Description
EXP100/C Expansion Interface Module, Central Unit
EXP100/R Expansion Interface Module, Remote Unit
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[1] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
Electrical & Mechanical
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) 3.5 × 2.75 × 0.75 in (8.9 × 7.0 × 1.9 cm)
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +80˚ C
Storage Temp -55˚ C to +85º C
Relative Humidity 0% to 95% (non-condensing)¹
TYPICAL APPLICATION
CENTRAL REMOTE
FDW1000S1/C
Access
Control
System
Access
Control
System
EXP100/C
EXP100/C
EXP100/C
EXP100/C
FDW1000S1/R
EXP100/R
EXP100/R
EXP100/R
EXP100/R
Card
Reader
Card
Reader
Card
Reader
Card
Reader
Card
Reader
Wiegand Data
Optic Fiber
RS485 Link – Muti-drop
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
20 Nov 2014© 2014 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.
Loading...