Analog and IP Video over COAX
CL(T,R)VE(1,2)COAX[POE][/M]
EXTENDERHARDENED 30W
The ComNet™ CL(T,R)VE(1,2)COAX[POE][/M] is a communications link that combines
composite analog baseband video and 10/100T(X) Ethernet on a single RG59 coaxial
cable and transmits it up to 500 meters. The device is particularly suited to applications
where the addition of IP Video to an existing analog video system is required. The
CLTVE1COAXPOE/M model can provide power to the IP device via PoE.
1 OR 2 1 OR 2
FEATURES
› Simultaneous transmission of IP video, and composite analog
video up to 500m over RG59 coaxial cable
› Proprietary adaptive analog equalizer for extending the reach
of composite analog video
› Full-duplex digital communications
› Continuous Transmitter to Receiver Ethernet throughput up
to 36Mbps
› Continuous Receiver to Transmitter Ethernet throughput up
to 4Mbps
› Single-Channel Transmitter with optional IEEE 802.3at PoE
power capability from 24VAC
› Single or Dual Channel Receiver
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CL(T,R)VE(1,2)COAX[POE][/M]
SPECIFICATIONS
Analog and IP Video over COAX
Video
Input Signal 1V pk-pk 75Ω
Overload >1.5V pk-pk
Bandwidth 5 Hz – 6 MHz
Diff. Gain Error <2%
Diff. Phase Error <0.7º
Tilt <1%
Signal-to-Noise Ratio 67 dB
Max RG-59 Distance 500m (1,640ft)
Ethernet
Interface 10/100BASE-T(X) Ethernet, RJ-45
Wire Type 4-pair CAT5 or better
Data Rate 36MBps Downlink, 4MBps Uplink
PoE 30W IEEE802.3at
Power
Operating Voltage Range CL(T,R)VE1COAX/M and CLTVE1COAXPOE/M:
12 to 36 VDC or 24 VAC
CLRVE(1,2)COAX: 9 to 18 VDC
Power Consumption CL(T,R)VE1COAX/M and CLTVE1COAXPOE/M: 2W
CLRVE1COAX: 2W
CLRVE2COAX: 4W
Electrical & Mechanical
Overload Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L × W × H):
CL(T,R)VE1COAX /M: 4.1 × 3.7 × 1.1 in. (10.4 × 9.4 × 2.8 cm)
CLTVE1COAXPOE/M: 4.1 × 3.7 × 2.2 in. (10.4 × 9.4 × 5.6 cm)
CLRVE(1,2)COAX: 6.1 × 5.3 × 1.1 in. (15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95% (non-condensing)
[1] Power consumption does not include that of Powered Device(s) (PD)
NOTE: In a continuing effort to improve and advance technology,
product specifications are subject to change without notice.
1
ORDERING INFORMATION
Part Number Description
CLTVE1COAX/M Medium Size Surface Mount Analog and IP Video over COAX Transmitter
CLTVE1COAXPOE/M Medium Size Surface Mount Analog and IP Video over COAX Transmitter with POE
CLRVE1COAX/M Medium Size Surface Mount Analog and IP Video over COAX Receiver
CLRVE1COAX ComFit 1 Channel Analog and IP Video over COAX Receiver
CLRVE2COAX ComFit 2 Channel Analog and IP Video over COAX Receiver
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50–60 Hz (Included)
2
Options 24VAC, 3A Power Supply (for use with CLTVE1COAXPOE/M model)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)
TYPICAL APPLICATION
Analog
Analog Camera
CLTVE1COAX/M
CLRVE1COAX/M
RG59
10/100 Ethernet
Cable
IP Camera
Analog
Analog Camera
CLTVE1COAXPOE/M
CLRVE1COAX
RG59
Cable
PoE
10/100 Ethernet
PoE to Camera
24VAC
Camera
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2014 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
|
LEEDS, UK LS27 7LE
Analog
10/100 Ethernet
Analog
10/100
Ethernet
T: 203.796.5300
|
T: +44 (0)113 307 6400
CNGE2FE24MS
Network Switch
CNGE2FE24MS
Network Switch
|
F: 203.796.5303
|
|
F: +44 (0)113 253 7462
MonitorDVR
NVR
MonitorDVR
NVR
TECH SUPPORT: 1.888.678.9427
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
31 Jan 2014