Comnet CLFE16EOC, CLFE16EOU, CLFE1EOC, CLFE1EOU, CLFE4EOC User Manual

...
0 (0)

This manual serves the following ComNet Model Numbers:

CLFE1EOC

CLFE4EOC

CLFE8EOC

CLFE16EOC

CLFE1EOU

CLFE4EOU

CLFE8EOU

CLFE16EOU

INSTALLATION AND OPERATION MANUAL

CLFE(X)EO(C,U) Series

ETHERNET OVER COPPER EXTENDER

WITH PASS-THROUGH POE TO 15 WATTS

The ComNetCopperLine® Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for userselection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.

Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Table 2 on Page 9 describes the LED indicators for each light on the unit.

The CLFE8EO(C,U) and CLFE16EO(C,U) are 1RU rack mountable units. The CLFE4EO(C,U) units are interchangeable between stand-alone or card mount configurations, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate. The CLFE1EO(C,U) units are stand-alone, or may be DIN-rail mounted by the addition of ComNet model DINBKT4 adaptor. See Figures A through C on Page 11 for mounting instructions.

TECH SUPPORT: 1.888.678.9427

INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 1

Comnet CLFE16EOC, CLFE16EOU, CLFE1EOC, CLFE1EOU, CLFE4EOC User Manual

INSTALLATION AND OPERATION MANUAL

CLFE(X)EO(C,U) Series

 

 

FIGURE 1 – CLFE1EOC SINGLE CHANNEL COAX UNIT

ETHERNET

FIGURE 2 – CLFE1EOC SINGLE CHANNEL COAX UNIT

Local/Remote push button

UP

See Installation Instructions,

 

Step 3

 

FIGURE 3 – CLFE1EOU SINGLE CHANNEL UTP UNIT

ETHERNET

 

EXT DISTANCE

 

 

Black w/ White

Power: Operates on PoE power

 

Stripe (AC or DC–)

OR 9 to 36 VDC

 

Black (AC or DC+)

OR 24 VAC

 

 

Power Consumption: 1.5 W

 

Switch

UP

DOWN

 

Local/Remote

Remote

Local

 

10/100

10 Mbps

100 Mbps

 

See Installation Instructions for more information

DOWN

10/100 data rate DIP switch

 

Local/Remote DIP switch

 

 

 

EXT DISTANCE

 

Black w/ White

Power: Operates on PoE power

Stripe (AC or DC–)

OR 9 to 36 VDC

Black (AC or DC+)

OR 24 VAC

 

Power Consumption: 1.5 W

FIGURE 4 – CLFE1EOU SINGLE CHANNEL UTP UNIT

Local/Remote DIP switch

10/100 data rate DIP switch

 

DOWN

 

 

Wire pair DIP switch

 

 

Switch

UP

DOWN

Local/Remote

Remote

Local

10/100

10 Mbps

100 Mbps

Wire Pair

4 Pair

1 Pair

See Installation Instructions for more information

UP

TECH SUPPORT: 1.888.678.9427

INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 2

INSTALLATION AND OPERATION MANUAL

CLFE(X)EO(C,U) Series

 

 

FIGURE 3 – CLFE4EOC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT

CH1 ETHERNET

CH2 ETHERNET

CH3 ETHERNET

CH4 ETHERNET

Operating Power: 9 to 15 VDC

Power Consumption: 5W

FIGURE 4 – CLFE4EOC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT

 

Local/Remote push button

 

See Installation Instructions,

 

Step 3

Local/Remote DIP switch

10/100 data rate

See Installation Instructions,

Step 3

DIP switch

 

See Installation

 

Instructions, Step 1

CH1 EXT

DISTANCE

CH2 EXT

DISTANCE

CH3 EXT

DISTANCE

CH4 EXT

DISTANCE

Black w/ White

Stripe (DC–)

Black (DC+)

TECH SUPPORT: 1.888.678.9427

INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 3

INSTALLATION AND OPERATION MANUAL

CLFE(X)EO(C,U) Series

 

 

FIGURE 5 – CLFE4EOU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS

CH1 ETHERNET

CH2 ETHERNET

CH3 ETHERNET

CH4 ETHERNET

Operating Power: 9 to 15 VDC

Power Consumption: 5W

FIGURE 6 – CLFE4EOU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS

CH1 EXT DISTANCE

CH2 EXT DISTANCE

CH3 EXT DISTANCE

CH4 EXT DISTANCE

Black w/ White Stripe (DC–)

Black (DC+)

Local/Remote DIP switch

See Installation Instructions, Step 3

Data rate DIP switch

See Installation Instructions, Step 1

 

Wire pair DIP switch

 

See Installation Instructions, Step 2

TECH SUPPORT: 1.888.678.9427

INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 4

Loading...
+ 8 hidden pages