Ethernet-over-Copper Extender With 30W PSE PoE+
CL(L,R)FE(X)POE(C,U)
EXTENDER 30WHARDENED 802.3af/at802.3at
The ComNet™ CopperLine® Ethernet over copper line supports up to
sixteen channels of 10/100Mbps Ethernet with PoE+ Power Injection and
Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With
the ability to connect directly to a PoE+ switch, or the ability to generate
PoE+ power with a 48 to 56 V input* to either the Local or Remote ends,
these units provide the ultimate flexibility for extending a powered device
(PD) over long distance copper. A complete set includes both a Local and
Remote module. Remote units are available in small package sizes that
include one or four channels, and Local modules are available in the same
packages as well as a 1RU rack for larger channel counts.
FEATURES
› Transmits individual Ethernet data channels with PoE+
Power Injection or Pass-through PoE+ over standard
UTP or Coaxial cable
› Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or
2,000 feet (610 m) at 100 Mbps over UTP cable
› Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or
2,000 feet (610 m) at 100 Mbps over Coaxial cable
› Extended temperature operation from -40°C to +75°C
› Extended Pass-through PoE meets the IEEE 802.3at
standard for Power over Ethernet
› Full 10/100 Mbps Bandwidth
› Supports Multicast, Unicast and Jumbo Frame
› Symmetric Bandwidth provides consistent upload and
download with virtually zero packet loss over the total
usable distance
› Type tested to RFC-2544 TCP/IP network bandwidth packet
transmission standards
› User-selectable data rate for maximum bandwidth and
transmission distance utilization
› Complies with all major IEEE standards and RFC network
protocols for UDP, TCP/IP, HTTP/HTTPs
› Tested and certified
compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity
with condensation, high-line/low-line voltage conditions
and transient voltage protection) of NEMA TS-1/TS-2 and
CALTRANS Traffic Signal Control Equipment Specifications.
› LED status indicators confirm operating status
› Available in small-size, ComFit interchangeable stand
alone or 1RU high rack mounted models
› Designed and manufactured in the USA
› Lifetime warranty
†
by an independent laboratory for full
APPLICATIONS
› Retrofit existing analog CCTV installations to Ethernet-
based systems
› CCTV systems for casinos, airports, school campuses
* Power Supply for PoE applications is sold separately.
† One Channel Units Only. Multichannel units are designed to meet NEMA TS-2 Spec.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CL(L,R)FE(X)POE(C,U)
SPECIFICATIONS
Ethernet-over-Copper Extender With 30W PSE PoE+
Ethernet
Data Rate DIP-switch selectable 10/100Mbps
RFC 2544 TCP/IP Packet Transmission
Standards IEEE 802.3af/at PoE+,
Transmission Distances
Data Interface 10/100BaseT(X) Ethernet
Full data rate / full duplex up to the maximum
rated distance
RFC: 768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet.
1
See char t below
Connectors
Ethernet RJ-45
Extended Distance Coaxial (C): female BNC
Ethernet (U): RJ-45
Operating Power Powered by PoE or 4-pin screw terminal for local
power or power injection
Power
Pass-Through Mode 1 CH: Operates on PoE power
or optional 9 to 36 VDC or 24 VAC, 1.5 W
4 CH: 12 to 15 VDC, 6 W
8 CH: 12 to 15 VDC, 12 W
16 CH: 12 to 15 VDC, 24 W
Power Injec tion Mode 1 CH: 48 to 56 VDC, 30 W
4 CH: 48 to 56 VDC, 120 W
8 CH: 48 to 56 VDC, 240W & 12 to 15 VDC, 12 W
16 CH: 48 to 56 VDC, 480 W & 12 to 15 VDC, 24 W
LED Indicators Operating Power
PoE Power
Ethernet Link and Activity
Ethernet Speed
Extended Link and Activity
Mechanical
Circuit Board Meets IPC Standard
Size (L×W×H) 1 CH: 3.3 × 2.5 × 1.1 in (8.4 × 6.4 × 2.8 cm)
Number of Rack Slot s 1 (4CH Version Only)
Shipping Weight 1 CH: <1 lbs./0.5 kg
Current Protection Automatic Resettable Solid-State Current Limiters
4 CH: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
8+ CH: 6.1 × 19 × 1.75 in (15.5 × 48.26 × 4.45 c m)
4 CH: <2 lbs./0.9 kg
8+ CH: <5 lbs./2.3 kg
Environmental
MTBF >100,000 hours
Operating Temp – 40˚ C to +75˚ C
UL Safety certifications conducted at maximum
ambient temperatures (Tma) of 65ºC.
Storage Temp – 40˚ C to +80˚ C
Relative Humidit y 0% to 95% (non-condensing)
[1] Dis tance figures are based on a 50 V PSE PoE power source, and external power supplies for
the extenders. Distance figures are obtained using in-house testing mirroring installations.
Factor s such as coaxial and copper cable quality, the number of connec tors and splices in the
cable run, the use of PoE, and environmental conditions encountered within the installation
might affect the actual transmission distance and should be taken into consideration. When
using UTP models Pass-Through PoE and Local PoE Injection is only possible in 4-pair mode.
2
ORDERING INFORMATION
Part Number Description Position Channels Form Factor Cable
CLLFE1POEC 1 Port EOC Ethernet Extender Local 1 Small Size Coax
CLRFE1POEC 1 Port EOC Ethernet Extender Remote 1 Small Size Coax
CLLFE1POEU 1 Port EOU Ethernet Extender Local 1 Small Size UTP
CLRFE1POEU 1 Port EOU Ethernet Extender Remote 1 Small Size UTP
CLLFE4POEC 4 Port EOC Ethernet Extender Local 4 ComFit (1 Slot) Coax
CLRFE4POEC 4 Port EOC Ethernet Extender Remote 4 ComFit (1 Slot) Coax
CLLFE4POEU 4 Port EOU Ethernet Extender Local 4 ComFit (1 Slot) UTP
CLRFE4POEU 4 Port EOU Ethernet Extender Remote 4 ComFit (1 Slot) UTP
CLLFE8POEC 8 Port EOC Ethernet Extender Local 8 1 RU 19” Rack Mount Coax
CLLFE8POEU 8 Port EOU Ethernet Extender Local 8 1 RU 19” Rack Mount UTP
CLLFE16POEC 16 Port EOC Ethernet Extender Local 16 1 RU 19” Rack Mount Coax
CLLFE16POEU 16 Port EOU Ethernet Extender Local 16 1 RU 19” Rack Mount UTP
Accessories:
Options:
Unit-appropriate power supply (one each provided with each extender unit). For PoE injection sold separately 48-56VDC PSU is required.
48 Volt DC Plug-in Power Supply (extra charge, consult factory)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Kit - With Mounting Hardware (Optional, order model DINBKT1 or DINBKT4) (Suitable for 1CH and 4CH units only)
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CL(L,R)FE(X)POE(C,U)
Ethernet-over-Copper Extender With 30W PSE PoE+
MAXIMUM TRANSMISSION DISTANCES
1
Media COAX - RG59/U UTP - 4 pair UTP - 1 pair
Data Rate
Source Power
Non-PoE Max.Distance
PoE CLASS2 (6.5W)
PoE CLASS3 (13W)
PoE CLASS4 (25.5W)
[1] Distance figures are based on a 50 V PSE PoE power source, and external power supplies for the extenders. Distance figures are obtained using in-house testing mirroring installations. Factors
such as coaxial and copper cable quality, the number of connectors and splices in the cable run, the use of PoE, and environmental conditions encountered within the installation might affect the
actual transmission distance and should be taken into consideration. When using UTP models Pass- Through PoE and Local PoE Injection is only possible in 4-pair mode.
1
1
1
1
10M 100M 10M 100M 10M 100M
15W 30W 15W 30W 15 W 30W 15W 30W N/A
3,000 ft
(914 m)
750 f t
(228 m)
N/A
5,000 ft
1,524 m
3,000 ft
(914 m)
850 ft
(259 m)
335 ft
(102 m)
2,000 ft
(610 m)
750 f t
(228 m)
N/A
2,000 ft
610 m
2,000 ft
(610 m)
850 ft
(259 m)
335 ft
(102 m)
3,000 ft
(914 m)
750 f t
(228 m)
N/A
3,000 ft
914 m
3,000 ft
(914 m)
850 ft
(259 m)
335 ft
(102 m)
2,000 ft
(610 m)
750 f t
(228 m)
N/A
2,000 ft
610 m
3,000 ft
914 m
2,000 ft
(610 m)
850 ft
(259 m)
335 ft
(102 m)
1,000 ft
305 m
N/A
N/A
N/A
MAXIMUM TRANSMISSION DISTANCES WITH 54V INPUT (CL(L,R)FE1POEU ONLY)
Media COAX - RG59/U UTP - 4 pair
Data Rate
Source Power
PoE Up to 25W
10M 100M 10M 100M
15W 30W 15W 30W 15W 30W 15W 30W
N/A N/A N/A N/A N/A 1000 ft (305 m) N/A 1000 ft (305 m)
TYPICAL APPLICATIONS
PoE Pass-Through Mode
See Chart Above
10 or 100 Mbps
PoE Switch
PoE Pass-Through Mode with Multiple Remote Units
10 or 100 Mbps
PoE Switch
Local PoE Injection Mode
10 or 100 Mbps
Switch
Remote PoE Injection Mode
10 or 100 Mbps
Switch
CLLFE1POE(C,U)
CLLFE4POE(C,U)
See Chart Above
12 VDC
See Chart Above
CLLFE1POE(C,U) CLRFE1POE(C,U)
48 to 56VDC
See Chart Above
CLLFE1POE(C,U)
12 VDC
CLRFE1POE(C,U)
CLRFE1POE(C,U)
CLRFE1POE(C,U)
CLRFE1POE(C,U)
CLRFE1POE(C,U)
CLRFE1POE(C,U)
48 to 56VDC
CAT-5 CABLE
TWISTED PAIR / COAX
PoE POWER
PoE Camera
PoE Camera
PoE Camera
PoE Camera
PoE Camera
PoE Camera
PoE Camera
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Comm unication Net works.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
|
F: +44 (0)113 253 7462
TECH SUPPORT: 1.888.678.9427
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
09 Apr 2015
Loading...