Comnet CLFE16EOC, CLFE16EOU, CLFE1EOC, CLFE1EOU, CLFE4EOC User Manual
...
INSTALLATION AND OPERATION MANUAL
CLFE(X)EO(C,U) Series
ETHERNET OVER COPPER EXTENDER
WITH PASS-THROUGH POE TO 15 WATTS
This manual serves the following
ComNet Model Numbers:
CLFE1EOC
CLFE4EOC
CLFE8EOC
CLF E16EOC
CLFE1EOU
CLFE4EOU
CLFE8EOU
CLF E16EOU
The ComNet™ CopperLine® Ethernet over copper line supports up to sixteen
channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable
(CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a
PoE switch or the included power supply. Four, eight, and sixteen channel units
operate from local power. These units provide the ultimate flexibility for extending
a powered device (PD) over long distance copper. DIP switches are provided for userselection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.
Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment
operating status. Table 2 on Page 9 describes the LED indicators for each light on
the unit.
The CLFE8EO(C,U) and CLFE16EO(C,U) are 1RU rack mountable units. The
CLFE4EO(C,U) units are interchangeable between stand-alone or card mount
configurations, or may be DIN-rail mounted by the addition of ComNet model
DINBKT1 or DINBKT4 adaptor plate. The CLFE1EO(C,U) units are stand-alone, or
may be DIN-rail mounted by the addition of ComNet model DINBKT4 adaptor. See
Figures A through C on Page 11 for mounting instructions.
INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 1TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) SERIES
FIGURE 1 – CLFE1EOC SINGLE CHANNEL COAX UNIT
ETHERNET
FIGURE 2 – CLFE1EOC SINGLE CHANNEL COAX UNIT
Local/Remote push button
See Installation Instructions,
Step 3
FIGURE 3 – CLFE1EOU SINGLE CHANNEL UTP UNIT
UP
Black w/ White
Stripe (AC or DC–)
Black (AC or DC+)
DOWN
EXT DISTANCE
Power: Operates on PoE power
OR 9 to 36 VDC
OR 24 VAC
Power Consumption: 1.5 W
Switch UP DOWN
Local/Remote Remote Local
10/100 10 Mbps 100 Mbps
See Installation Instructions for more information
10/100 data rate DIP switch
Local/Remote DIP switch
ETHERNET
FIGURE 4 – CLFE1EOU SINGLE CHANNEL UTP UNIT
Local/Remote DIP switch
10/100 data rate DIP switch
Wire pair DIP switch
TECH SUPPORT: 1.888.678.9427
EXT DISTANCE
Black w/ White
Stripe (AC or DC–)
Black (AC or DC+)
Power: Operates on PoE power
OR 9 to 36 VDC
OR 24 VAC
Power Consumption: 1.5 W
Switch UP DOWN
Local/Remote Remote Local
10/100 10 Mbps 100 Mbps
Wire Pair 4 Pair 1 Pair
See Installation Instructions for more information
DOWN
UP
INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 2
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) SERIES
FIGURE 3 – CLFE4EOC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT
CH1 ETHERNET
CH2 ETHERNET
CH3 ETHERNET
CH4 ETHERNET
CH1 EXT
DISTANCE
CH2 EXT
DISTANCE
CH3 EXT
DISTANCE
CH4 EXT
DISTANCE
Black w/ White
Stripe (DC–)
Black (DC+)
Operating Power: 9 to 15 VDC
Power Consumption: 5W
FIGURE 4 – CLFE4EOC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT
Local/Remote push button
See Installation Instructions,
Step 3
Local/Remote DIP switch
See Installation Instructions,
Step 3
10/100 data rate
DIP switch
See Installation
Instructions, Step 1
TECH SUPPORT: 1.888.678.9427
INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 3
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) SERIES
FIGURE 5 – CLFE4EOU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS
CH1 ETHERNET
CH2 ETHERNET
CH3 ETHERNET
CH4 ETHERNET
CH1 EXT
DISTANCE
CH2 EXT
DISTANCE
CH3 EXT
DISTANCE
CH4 EXT
DISTANCE
Black w/ White
Stripe (DC–)
Black (DC+)
Operating Power: 9 to 15 VDC
Power Consumption: 5W
FIGURE 6 – CLFE4EOU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS
Local/Remote DIP switch
Data rate DIP switch
See Installation Instructions, Step 1
See Installation Instructions, Step 3
Wire pair DIP switch
See Installation Instructions, Step 2
TECH SUPPORT: 1.888.678.9427
INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 4
Loading...