Comnet CLFE4+1SMSPOEC, CLFE4+1SMSPOEU, CLFE4+1SMSC, CLFE4+1SMSU Specsheet

10/100 4TX+1EX Ethernet Self-managed Switch

with Power over Ethernet (PoE+)

CLFE4+1SMS[POE](C,U)

The ComNet
management functionality and provides 4 copper ports operating at 10/100Mbps
and is designed to combine four electrical ports into a single electrical Cat5, UTP
or Coax CopperLine
is no programming required to use this product. The ComNet CLFE4+1SMS comes
pre-programmed, preventing network video flooding with DIP switch selection
of the fifth electrical port as uplink or as an unmanaged switch. Ports 1–4 of the
CLFE4+1SMSPOE can supply up to thirty (30) watts of Power over Ethernet (PoE)* and
incorporate PoE+ features based on the IEEE 802.3at standard. It is “Plug-and-Play”.

™

FEATURES

› No Programming Required

› 10/100 Mbps Ethernet

• 4 × 10/100 BASE-T/TX electrical ports with optional PoE+

• 1 × 10/1000Mbps CopperLine electrical uplink

› Electrical ports support Auto-Negotiation for 10 Mbps

or 100 Mbps, full duplex or half duplex data.

› Pre-programmed Port for uplink

› Full 10/100 Mbps Bandwidth

› Supports Multicast, Unicast and Jumbo Frame

› Automatic MDI/MDI-X crossover

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/low­line voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other
voltage transient events.

EXTENDERHARDENED

CLFE4+1SMS[POE](C,U) is a five-port Ethernet switch with uplink

®

port that forwards this data to the next network device. There

› Power and Activity status LED indicators

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use –

ComFit, or can be DIN-Rail mounted with optional kit

› IEEE 802.3 compliant

› Lifetime Warranty

4+1

30W

APPLICATIONS

› IP Video Applications

› CCTV systems for casinos, airports, school campuses

› Retrofit of existing analog CCTV installations to Ethernet

based systems

* Power Supply for PoE applications is sold separately.

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

CLFE4+1SMS(POE)(C,U)

SPECIFICATIONS

10/100 4TX+1EX Ethernet Self-managed Switch

with Power over Ethernet (PoE+)

Ethernet

Data In terfa ce Ethern et
Data Rate 10/100 Mbps

IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports

Standards IEEE 802.3at PoE+,

RFC: 768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet.

Connectors

Operating Power Terminal Block
Ethernet RJ-45
Extended Distance Coaxial (C): female BNC

Ethernet (U): RJ-45

Electrical & Mechanical

Surface Mount Wall or Flat Surface Screw Attachment
Number of Rack Slots 1 (Although the units may be mounted inside a

Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lbs./0.9 kg

Environmental

MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C

LED Indicators - Electrical Link/Data Activity

- Power

- Power over Ethernet (PoE+)

- Extension Link/Activity

Power

Operating Voltage 9 to 12 VDC (non-PoE), 48 to 56VDC (PoE)
Power Consumption 10W (non-PoE), 130W (PoE)

Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²

NOTE: In a continuing effort to improve and advance technology,
product specifications are subject to change without notice.

ORDERING INFORMATION

Part Number Description

CL FE4+1S MS C 4 Port 10/100 Mbps Ethernet Self-managed Switch, with Coaxial CopperLine uplink port

CLFE4+1SMSU 4 Port 10/100 Mbps Ethernet Self-managed Switch, with UTP CopperLine uplink port

CLFE4+1SMSPOEC 4 Port 10/100 Mbps Ethernet Self-managed Switch with PoE+, with Coaxial CopperLine uplink port

CLFE4+1SMSPOEU 4 Port 10/100 Mbps Ethernet Self-managed Switch with PoE+, with UTP CopperLine uplink por t

Included Accessories
Options

Unit-appropriate power supply (one each provided with each non-PoE unit).
For PoE units order suitable PoE power supply (sold separately)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware ( sold separately, order model DINBKT1 or DINBKT4)

ComNet rack the PoE models cannot be powered
from the built-in rack PSU; they must be powered
by an external 48-56VDC PSU.)

UL Safety certifications conducted at
maximum ambient temperatures (T

65ºC

) of

ma

MAXIMUM TRANSMISSION DISTANCES³

Media COAX - RG59/U UTP - 4 pair UTP - 1 pair

Data Rate

Extended Distance³

[3] Distance figures are obtained using in-house testing mirroring installations. Factors such as coaxial/copper cable quality, the number of

connectors/splices in the cable run, and environmental conditions encountered within the installation may affect the actual transmission
distance, and should be taken into consideration.

TYPICAL APPLICATION

10 or 100 Mbps Switch

[4] For non-PoE applications, use the
CLFE4+1SMS(C,U) with a 12 VDC Power Supply

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Comm unication Net works.

10M 100M 10M 100M 10M 100M

5,000 ft
1,524 m

2,000 ft

610 m

3,000 ft

914 m

2,000 ft

610 m

3,000 ft

914 m

PoE Cameras

See Chart Above

CLFE(X)EO(C,U)

CLFE4+1SMSPOE(C,U)

12 VDC

4

|

F: 203.796.5303

|

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

48 to 56VDC

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

1,000 ft

305 m

CAT-5 CABLE

CAT5 or COAX

PoE POWER

|

[e-mail]

09 Apr 2015