Page 1
Mini Ethernet-over-Coax Extender Remote Units
Powered by External or PoE Source
CLFE1EOC(P,E)/M
HARDENED
The ComNet™ CopperLine® Ethernet-over-coax minis are an ultra-small form
factor addition to the ComNet Copperline product family. These miniature
remote units provide 10/100 Mbps Ethernet data with or without Pass-through
PoE power over extended distance coaxial cable. Available in both standard
and PoE applications, the mini CopperLine units will allow extended distance
over copper to be used in applications where space is extremely limited.
Automatically configured as remote units, and with user configurable selection
of 10 Mbps or 100 Mbps speed these units are simple to install.
EXTENDER PASS-THRU
FEATURES
› Transmits individual Ethernet data with or without Pass-
through PoE over Coaxial cable
› Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or
2,000 feet (610m) at 100 Mbps over Coaxial cable
› Extended temperature operation from -40°C to +75°C
› Extended Pass-through PoE meets the IEEE 802.3af
standard for Power over Ethernet
› Full 10/100 Mbps Bandwidth
› Supports Multicast, Unicast and Jumbo Frame
› Symmetric Bandwidth provides consistent upload and
download with virtually zero packet loss over the total
usable distance
› Type tested to RFC-2544 TCP/IP network bandwidth packet
transmission standards
› User-selectable data rate for maximum bandwidth and
transmission distance utilization
› Complies with all major IEEE standards and RFC network
protocols for UDP, TCP/IP, HTTP/HTTPs
› Designed to meet full compliance with the environmental
requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.
› Designed and manufactured in the USA
› LED status indicators confirm operating status
› Can be DIN-rail mounted with optional DINBKT4 mounting kit
› Lifetime warranty
APPLICATIONS
› Retrofit existing analog CCTV installations to Ethernet-
based systems
› CCTV systems for casinos, airports, school campuses
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
Page 2
CLFE1EOC(P,E)/M
SPECIFICATIONS
Mini Ethernet-over-Coax Extender Remote Units
Powered by External or PoE Source
Ethernet
Data Interface 10/100BaseT(X) Ethernet
Data Rate DIP switch selection of 10/100 Mbps
Full data rate / full duplex up to the maximum
rated distance
RFC 2544 TCP/IP Packet Transmission
Standards IEEE 802.3af PoE (CLFE1EOCP/M),
RFC: 768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet.
Transmission Distances
1
See char t below
Connectors
Ethernet RJ-45
Extended Distance Pigtailed BNC
Operating Power CLFE1EOCP/M: Powered by PoE
CLFE1EOCE/M: 2-pin screw terminal
LED Indicators Operating Power
Ethernet Link and Activity
Extended Link and Activity
Power
CLFE1EOCP/M Runs off PoE pass-through only
CLFE1EOCE/M 12 VDC or 24 VAC
Power Consumption 1.5 W
Mechanical
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) 2.3 × 1.6 × 1.1 in (5.7 × 4.1 × 2.8 c m)
Shipping Weight <1 lbs./0.45 kg
Environmental
MTBF >100,000 hours
Operating Temp – 40˚ C to +75˚ C
UL Safety certifications conducted at maximum
ambient temperatures (Tma) of 65ºC.
Storage Temp – 40˚ C to +80˚ C
Relative Humidit y 0% to 95% (non-condensing)
2
MAXIMUM TRANSMISSION DISTANCES
1
Media COAX - RG59/U
Data Rate
Source Power
Non-PoE Max.Distance
PoE CLASS2 (6.5W)
PoE CLASS3 (13W)
[1] Dis tance figures are based on a 50 V PSE PoE power source, and external power supplies for the extenders. Distance figures are obtained using in-house tes ting mirroring installations. Factors such
as coaxial cable qualit y, the number of connectors and splices in the cable run, the use of PoE, and environmental conditions encountered within the installation might affect the actual transmission
distance and should be taken into consideration. Due to advanced negotiation signaling required in IEEE802.3at applications, pass-through applications are limited to IEEE802.3af PD devices only.
1
1
1
10M 100M
15W 30W 15W 30W
3,000 ft
914 m
750 f t
228 m
5,000 ft
1,524 m
3,000 ft
914 m
850 ft
259 m
2,000 ft
610 m
750 f t
228 m
2,000 ft
610 m
2,000 ft
610 m
850 ft
259 m
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
Page 3
CLFE1EOC(P,E)/M
Mini Ethernet-over-Coax Extender Remote Units
Powered by External or PoE Source
ORDERING INFORMATION
Part Number Description Position Channels Form Factor Cable
CLFE1EOCE/M Miniature CopperLine Single Channel Ethernet over COAX External Power Remote 1 Mini Size Coax
CLFE1EOCP/M Miniature CopperLine Single Channel Ethernet over COAX PoE Powered Remote 1 Mini Size Coax
Accessories: Unit-appropriate power supply (one each provided with each CLFE1EOCE/M extender unit)
Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult fac tory)
DIN-Rail Mounting Adaptor Kit - With Mounting Hardware (Optional, order model DINBKT4)
TYPICAL APPLICATIONS
PoE Pass-Through Mode
See Chart Above
10 or 100 Mbps
PoE Switch
PoE Pass-Through Mode with Multiple Remote Units
10 or 100 Mbps
PoE Switch
Non-PoE Mode
10 or 100 Mbps
Switch
CLFE1EOC CLFE1EOCP/M
CLFE4EOC
See Chart Above
12 VDC
See Chart Above
CLFE1EOC CLFE1EOCE/M
12 VDC /
24 VAC
CLFE1EOCP/M
CLFE1EOCP/M
CLFE1EOCP/M
CLFE1EOCP/M
12 VDC /
24 VAC
CAT-5 CABLE
TWISTED PAIR or COAX
PoE POWER
PoE Camera
PoE Camera
PoE Camera
PoE Camera
PoE Camera
IP Camera
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Comm unication Net works.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
|
F: +44 (0)113 253 7462
TECH SUPPORT: 1.888.678.9427
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
19 Mar 2015
Loading...