CopperLine® Value Kit: Point-to-Point
Mini Ethernet-over-Coax Extender
CLEK11EOC
EXTENDER
The ComNet™ CopperLine® Ethernet-over-coax minis are an ultra-small form
factor addition to the ComNet Copperline product family. These miniature
remote units provide 10/100 Mbps Ethernet data over extended distance
coaxial cable, up to 1,200 feet (400 meters). The mini CopperLine units will allow
extended distance over copper to be used in standard applications where space
is extremely limited. A DIP Switch allows configurable selection of 10 Mbps or
100 Mbps speed these units are simple to install. This CopperLine® Value kit
provides two units with power supplies.
FEATURES
› Transmits individual Ethernet data over Coaxial cable
› Extends Ethernet up to 1,200 feet (400 m) over Coaxial cable
› Temperature operation from -0°C to +50°C
› Full 10/100 Mbps Bandwidth
› Supports Multicast, Unicast and Jumbo Frame
› Symmetric Bandwidth provides consistent upload and
download with virtually zero packet loss over the total
usable distance
› Type tested to RFC-2544 TCP/IP network bandwidth packet
transmission standards
› User-selectable data rate for maximum bandwidth and
transmission distance utilization
› Complies with all major IEEE standards and RFC network
protocols for UDP, TCP/IP, HTTP/HTTPs
› Designed and manufactured in the USA
› LED status indicators confirm operating status
› Can be DIN-rail mounted with optional DINBKT4 mounting kit
› 5 Year Warranty
APPLICATIONS
› Retrofit existing analog CCTV installations to Ethernet-
based systems
› CCTV systems for casinos, airports, school campuses
5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CLEK11EOC
SPECIFICATIONS
CopperLine® Value Kit: Point-to-Point
Mini Ethernet-over-Coax Extender
Ethernet
Data Interface 10/100BaseT(X) Ethernet
Data Rate DIP switch selection of 10/100 Mbps
Full data rate / full duplex up to the maximum
rated distance
RFC 2544 TCP/IP Packet Transmission
Standards RFC: 768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet.
Connectors
Ethernet RJ-45
Extended Distance BNC
Operating Power 2-pin screw terminal
LED Indicators Operating Power
Ethernet Link and Ac tivity
Extended Link and Activity
Power
Operating Voltage 12 VDC or 24 VAC
Power Consumption 1.5 W
Mechanical
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) 2.3 × 1.6 × 1.1 in (5.7 × 4.1 × 2.8 cm)
Shipping Weight <1 lbs./0.45 kg
Environmental
MTBF >100,000 hours
Operating Temp 0˚ C to +50˚ C
Storage Temp – 10˚ C to +60˚ C
Relative Humidity 0% to 95% (non-condensing)
ORDERING INFORMATION
Part Number Description
CLEK11EOC 2 × Miniature CopperLine Single Channel Ethernet over COA X External Power
Accessories: Unit-appropriate power supply (one each provided with each extender unit)
Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Kit - With Mounting Hardware (Optional, order model DINBKT4)
2
TYPICAL APPLICATIONS
10 or 100 Mbps
Switch
CLEL1EOC/M CLER1EOC/M
12 VDC /
24 VAC
12 VDC /
24 VAC
CAT-5 CABLE
COAX
IP Camera
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Comm unication Net works.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
|
F: +44 (0)113 253 7462
TECH SUPPORT: 1.888.678.9427
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
30 Jun 2015