Comnet C1PS Specsheet

Card Cage Power Supply

C1PS

The design approach employed by ComNet
provides for the elimination of a single-point failure in the event of a major fault
within any module located within the chassis rack. This is accomplished through the
use of automatic electronic current limiting within each rack-mountable module,
rather than providing the current limiting within the power supply unit which
supports the power requirements for equipment located within the rack. In nearly
all competing designs,a major fault within a module, located within the chassis
rack, results in the power supply unit going into a current limiting condition, and
as a result, all of the modules within the rack shut down. The C1PS rack power
supply design employed by ComNet eliminates this possibility, as only the faulty
module shuts down, and the operation of the other modules within the rack continue
unimpaired. This automatic current limiting feature is also self-resetting, should
the fault or overload be of a temporary or intermittent condition. Furthermore, all
modules located within the chassis rack are hot-swappable, so that it is not necessary
to power-down the rack when removing or replacing modules.

FEATURES

› Automatic electronic current limiting feature
› Voltage transient protection on all power and signal input/

output lines provides unconditional protection from power
surges and other voltage transient events.

› Lifetime Warranty

ORDERING INFORMATION

Part Number Description

C1PS

AGENCY COMPLIANCE

In a continuing effort to improve and advance technology,
product specifications are subject to change without notice.

90-264 VAC Input Power Supply. Power cords appropriate to the
countr y where the unit is being used will be included with the order

™

for the modular C1PS power supply,

SPECIFICATIONS

Electrical

Input Voltage 90-264 VAC @ 70 W Maximum

Output Voltage 9 VDC +/- 5% @ 6.5 Amps @ 75˚C

Fusing 1.25 A slow blow (rack power supply)

Plug-in modules individually electronically fused.
Each power supply unit is individually fused.

Power Indicator Red LED

AC Line Cord Detachable, IEC-connected. Allows easy field

replacement or exchange for various worldwide AC
power plug configurations.

Mechanical

Size (L × W × H) 5.25 × 1.95 × 7.75 in. (13.34 × 4.95 × 7.75 cm)

Shipping Weight: <3 lbs./1.4 kg

Environmental

MTBF >100,000 hours

Operating Temp -40˚ C to +75˚ C

Storage Temp -40˚ C to +85˚ C

Heat Generation 240 BTU

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

|

F: 203.796.5303

|

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

[e-mail]