Page 1
Instruction Sheet 847252905
107058901
110AA2-100 FT
110C-5 x 20 terminal blocks
107058935
110AA2-300 FT
110C-5 x 60 terminal blocks
107058919
110AB2-100FT
110C-5 x 4 and 110C-4 x 20 connecting blocks
107058943
110AB2-300FT
110C-5 x 12 and 110C-4 x 60 connecting blocks
Issue 10, October 2012
www.commscope.com
110 Field Terminated Cross-Connect System Terminal
Blocks
General
The 110 wiring block kits are designed to provide everything needed to terminate twisted-pair cables with
conductor sizes from 26 to 22 gauge (0.40 to 0.64mm). The blocks consist of 25-pair groups and come in
configurations to accommodate 100- and 300-pairs.
Ordering information is listed below:
Material ID Part No. Description
How to Contact Us
― Installation and Wiring Instructions
• To find out more about CommScope® products, visit us on the web at http://www.commscope.com/
• For technical assistance:
- W ithin the United States, contact your local account representative or technical support at
1-800-344-0223. Outside the United States, contact your local account representative or
Authorized Business Partner.
- Within the United States, report any missing/damaged parts or any other issues to
CommScope Customer Claims at 1-866-539-2795. Outside the United States, contact your
local account representative or Authorized Business Partner.
Parts List
Verify parts against the parts list below:
Quantity
110AA2-
100 FT
107058901
― 1 ― 1 110AW2-300 Wiring block
1 ― 1 ― 110AW2-100 Wiring block
20 60 4 12 110C-5 Connecting block
― ― 20 60 110C-4 Connecting block
― 1 ― 1 Designation strip pack (6 per pack)
2 2 2 ― Designation strip (single)
1 1 1 1 Designation strip insert
1 1 1 1 Instruction sheet
110AA2-
300 FT
107058935
110AB2-
100 FT
107058919
© 2012 CommScope, Inc. All rights reserved
110AB2-
300 FT
107058943
Description
Page 1 of 4
Loading...