Commax CDV-50, CDV-50D User Manual

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety)

before using a product and follow instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal

operation of the product.

Model No. CDV-50/50D

WIDE COLOR VIDEO

DOOR PHONE

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]

Web site : www.commax.com

Printed In Korea/ 2008.05

 2 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

Introduction

The model number is located on the bottom and record the serial number in the space provid­ed below. Refer to these numbers whenever you call upon your Commax dealer regarding this
product.

Model No. Serial No.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

This symbol is intended to alert
the user to the presence of unin­sulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient magni­tude to constitute a risk of elec­tric shock to persons.

This symbol is intended to alert
the user to the presence of
important operating and mainte­nance (servicing) instructions in
the literature accompanying the
appliance.

Ⓒ 2001 COMMAX COMPANY LIMITED

All Rights Reserved

Commax are registered and trademarks used by

commax company limited

WARNING : TO REDUCE THE RISK OF

FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE

CAUTION : TO REDUCE THE RISK OF
FIRE OR SHOCK HAZARD AND
ANNOYING INTERFERENCE, USE THE
RECOMMEDED ACCESSORIES ONLY

CAUTION : TO REDUCE THE RISK OF
FIRE OR SHOCK HAZARD, REFER
CHANGE OF SWITCH SETTING INSIDE
THE UNIT TO QUALFIED SERVICE
PERSONNEL

CAUTION : TO REDUCE THE RISK OF
FIRE OR SHOCK HAZARD, REFER­MOUNTING OF THE OPTIONAL INTER­FACE BOARD TO QUALIFIED SERVICE
PERSONNEL

 3

Read Instructions - All safety and
operating instructions should be read
before the unit is operated.

Retain Instruction - The safety and
operating instructions should be retained
for future reference.

Heed Warnings - All warnings on the
equipment and in the operating instructions
should be adhered to.

Follow Instruction - All operating and use
instructions should be followed.

Ventilation - Slots and openings in the
cabinet are provided for ventilation and to
protect it from overheating.

Power Sources - This equipment should
be operated only from the type of power
source indicated on the marking label.

Grounding - This product is equipped with
a polarized alternating - current line plug.
This plug will fit into the power outlet only
oneway. This is a safety feature.

Power Cord Protection - Power- supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them; pay
particular attention to cords at plugs,
convenience receptacles and the point
where cords exit from the equipment.

Overloading - Do not overload power
outlets and extension cords as this can
result in a risk of fire or electric shock.

Damage Requiring Service - Unplug this
equipment from the power source and
refer servicing to qualified service
personnel under the following conditions:
a. when the power supply cord or plug is

damaged;

b. if liquid has been spilled or objectes

have fallen into the unit.;

c. if the equipment has been exposed to

rain or water;

d. if the equipment has been dropped or

otherwise damaged;

e. when the equipment exhibits a distinct

change in performance - this indicates a
need for service.

Water and Moisture - Do not use this
product near water, for example, near a
bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a
swimming pool, and the like.

Accessories - Do not place this product
on an unstable cart, stand, tripod, bracket,
or table. The product may fall, causing
serious injury to a child or adult, and
serious damage to the appliance.

Object and Liquid Entry - Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the
product.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

Note : Do not place this product directly on

wood or simulated woods surfaces as

theses surfaces are easily damaged.

Important Safeguards

 4

Lightning - For added protection for this
product before a lightning storm, or when it
is left unattached and unused for long
periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the
product due to lightning and power-line
surges. Be sure is properly grounded, as
defined above. If you live in an area
heavily prone to lightning stroms, it is
recommended that you invest in power­line, telephone-line, RF cable and
Actuator/Polarization surge protectors to
protect your system from possible damage.

Protective Attachment Plug - The
product is equipped with an attachment
plug having overload protection. This is
safety feature. See Instruction Manual for
replacement or resetting of protective
device. If replacement of the plug is
required, be sure the service technician
has used a replacement plug specified by
the manufacturer that has the same
overload protection as the original plug.

14.

15

16

17

18

19

20

21

Note to system installer: This

reminder is provided to call the system
installer’

s attention that provides
guidelines for proper grounding and, in
particular, specifies that the cable
ground shall be connected to the
grounding system of the building, as
close to the point of cable entry as
practical.

Servicing - Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
servicing to qualified service personnel.

Replacement Parts - When replacement
parts are require, be sure the service
technician has used replacement parts
specified by the manufacturer or having
the same characteristics as the original
part.

Safety Check - Upon completion of
service or repairs to this product, ask the
service technician to perform safety checks
to determine that the product is in proper
operating condition.

Power Line -The system should not be
located near overheat power lines or other
electric light or power circuits, or where it
can fall into power lines or circuits.

Attachment - Do not use attachments not
recommended by the product
manufacturer as they may cause hazards.

Outdoor Cable Protection - All outdoor
connections should be protected from
moisture. Internal heating can draw
moisture or condensation into the covering
of the unit and affect its operation.

Important Safeguards

 5 

Before You Begin

Operation

Troubleshooting Guide

Specifications

Introduction

.................................................................................................

2

Important Safeguard

....................................................................................

3

Table Contents

.............................................................................................

5

Preparations

.................................................................................................

6

Location and function of controls (For Monitor)

...........................................

7

Location and function of controls (For Camera)

...........................................

8

Operating

Operating And Function Of Control

..............................................................

9

1. Communication with the Doorphone Function

....................................

9

2. Communication with the Interphone

...................................................

9

Installation (For Monitor)

............................................................................

10

Installation (For Camera)

...........................................................................

11

Part List

......................................................................................................

12

Troubleshooting Guide

...............................................................................

13

Specifications

.............................................................................................

14

Table of Contents