CDL-210P
CDL-210P/210R
재질
USER MANUAL
Durable Door lock without worry about A/S
Durable body of metal
Auto lock/rewind/double lock function
Use of 3D touch and imaginary function to secure password
Password/Smart key/Fingerprint can be registered multiple
Multi-level volume control / Selectable silence function
Light button that is visible even in dark places
Emergency power function (9V square battery)
High-voltage protection/Fire protection/Anti-hack system
Intuitive registration UI
COMMAX Co., Ltd.
Products specifications and components
Sort Specifications
Opening method
Rated volt age DC 6V LR6 1.5V AA sized alkaline batteries 8
Emergency power DC 9V Alkaline batteri es 8 (Separate purchase)
Type of product
High temperature sensing Temperature sensor ty pe 60+-10 dgrees
material
Sort Using frequency
RFID 13.56Mhz 1 ASK 93.5dBu/u nder m@ 10m
Wireless devic es for
afety syste ms
(optional)
Outbody
Inbody
Password 4-12 digit s (Up t o 4 can be registered)
RF key It can register wit hin 30
Fingerprin t It can register wit hin 100
Wallpad interlock Optional (CDL-447)
CDL-210P SKF(Fire-proof, temperature-sensitive form, key primary keylock / F-T-K-M)
CDL-210PSNF(Fire-p roof, temperature-sensitive form, non-key, primary keylo ck / F-T-NK-M)
Out body AL,ZN,ABS,PC
In body AL,ZN,ABS,PC
Number of
channels
447.275Mh z 1 FSK 10mW/under
Mortise & Stricker(Option1) Screw
Modulation
format
Big Mortise & Stricker(Option2)
Antenna power
Indoor Names and Functions
No Name Specif ications
1 Battery cove r
2 Interlocking pack Receive (CDL-447, optional)
3 Registration button It is used to register or change password or smart key
4 Mortise
5
6 Latch bolt It serves to keep t
7 Alkalina AA battery It is a power source that operates the door lock.
8 Double lock button
9 Indoor handle It is used to open or close the door indoors.
Dead bolt
(Square locking type)
MORTISE TYPE
This cover protects the batteries and the registrati on
button.
It is attached to the side of the door and closes or locks the
door.
It locks the door by locking it on the door frame.
It can be used to lock the door so that it can not be opened
outside,such as during nighttime hours that require
attention.
he door shaken
BIGMORTISE TYPE
Thank you for purchasing COMMAX products.
Before you use, please read this manual and use
correctly. COMMAX is not responsible for any safety
accident due to abnormal operation of the products.
Due to non-key door lock, it may cause
destruction of digital door lock when it is in trouble.
Warning for Safety
These warnings are to secure user’s safety and prevent the possible loss of property.
Please read carefully below to use the product in a correct manner.
* Do not disassemble, repair or modify the device by any unauthorized person.
* This product is for indoor, we do not guarantee any operation at other environment.
* Please use the product after reading User’s Manual.
* Do not press the buttons with any tools(Ex. Awl, Pins..)
* Change your access code from time to time for your safety.
* Do not impact on the device.
* Be careful that leakage or rupture may occur when inserting a battery in wrong direction.
* Be careful that water should not seep into the device.
* When replacing a battery, change all the batteries with new alkaline batteries.
* Please wipe the product with soft, dry towels.
* Please keep product warranty card for A/S.
* Do not use this product with other purposes except digital door lock function.
Installation
instruction
User manual
8 Batteries
Construction diagram
4 Smart key
2 Emergency
(Key formula only)
Outdoor shaft
*The components of the product may change depending
on the installation environment.
Outdoor Names and Functions
No Name Specifications
1 Name board Enter the number when registering or changing password.
2 Battery warning light Turns on with an audible alarm at low voltage.
3 Smart key input unit
4 Emergency hole Key formula only (CDL-210PSKF)
5 Outdoor handle It is Used to
6 Emergency power terminal
7 Fingerpirnt input unit
9V emergency battery
(Separate purchase)
It is the place where smart keys are recognized to open the
door. You can open the door by registering the smart key or
touching the registered smart key.
open or close doors from outdoors.
In case the battery is completely discharged, you can use
9V battery then, the power will be on.
You can register your fingerprint, open the door by using
the fingerprint registered.
How to register fingerprint
1. Press
[registration] button
Beep
Open the battery cover and
press [registration]button
3. Contact fingerprint to be registered to fingerprint input unit
After contacting the fingerprint to the fingerprint
input part four times, register the registration
by pressing the [register] button on the room body.
Reference
1. Up to 100 fingerprints can be registered.
2. If registration is not in progress for 20 seconds,
registration will be canceled.
2. Press [1]button in the number
plate of outdoor side
How to register and change password
Be sure to register your password with the door open.
1. Press
[registration] button
2. Press [2]button in the number
plate of outdoor side
Beep
Open the battery cover and
press [registration]button
3. Enter new password
After entering the new password(4~12 digits),
press * button and the confirmation tone sounds
and registration is completed. Press the * button
once more to end registration.
Reference
1. When adding the password, repeat the above item 3
before the number plate lamp turns off.
2. Up to 4 password can be registered
Cautions
1. If you register a new password, the existing password
will be automatically deleted.
2. Do not use consecutive numbers when registering your
password.
How to register Smart key
When registering or re-registering a smart key, you must register
all the smart keys you have at once. Also registered smart keys are
door lock only. It may not work when used with other products.
1. Press
[registration] button
Open the battery cover and
press [registration]button
Beep
3. Contact smart key to smart key input unit
If you touch the smart key to be registered one by one,
you will hear a confirmation sound every time you touch it.
Registration is completed by clicking the [Registration]
button on the indoor side body.
Reference
1. When adding the password, please repeat the above
item 3 before the [License plate lamp] turns off.
2. Up to 30 smart keys can be registered.
Cautions
1. When registering a new smart key, the existing smart
key is automatically deleted.
2. Press [3]button in the number
plate of outdoor side
How to register the linker (optional)
1. Press
[registration] button
Open the battery cover and
press [registration]button
Beep
3. Press the [Register] or [OP / CL] button on the linker
After pressing the front door button of the wall pad(video phone),
press the [Registration] or [OP / CL] button of the interlocker
when the standby mode is canceled.
Reference
1. You can register up to 5 interlocks.
2. Repeat step 3 when registering the linker.
How to delete fingerprint, smart key, linker
1. Press
[registration] button
Open the battery cover and
press [registration]button
Beep
3. Press #button
Press and hold the [#] button for 5 seconds to delete
the registered fingerprint, smart key or interlock.
How to set auto lock, manual lock
Make sure to turn off the Mortise Square Lock on the indoor body.
1. Enter password 2. Press [#]button
3. Press [4] or [7]button and press registration button
Touch the outdoor
license plate to turn
on the LED and
enter the registered
password.
Auto lock setting: Press the [4] button and press the register
button to set the auto lock function after a confirmation
tone sounds.
Manual lock setting: After pressing the [7] button and pressing
the register button, the manual lock function is set after a tone
is heard.
2. Press [4]button in the number
plate of outdoor side
2. Press number in the number plate
- Smart key deletion: No 7 button
- Deleting the interlock: No 8 button
- Delete fingerprint: No 9 button
Press the [#] button
twice in succession
How to set and dismiss 3D touch
1. Enter password 2. Press the [#] button twice in
Touch the outdoor
license plate to
turn on the LED
and enter the
registered password.
succession, then press
the 0 button.
3. Press [Registration]button
When you press the [Registration] button on the outdoor
Beep
Open the battery cover and
press the [Registration] button.
side body, the 3D touch function is turned on or off.
- Set tone: Piriricic
- Off sound: Piric
Reference
1. It is a function to strengthen the security of password
and it is a function to set a virtual number instead of the
original number when the password is registered and
authenticated for more than 1 second.
Ex) When 1 is long pressed: It is recognized as a virtual
number other than 1.
2. Combined with the imaginary function of this product,
password security is further strengthened.
3. You can set each number and you can check that the
lamp blinks when you press for more than 1 second.
4. 3D touch mode is turned off at the factory.
Cautions
1. When the 3D touch mode is released, the password is
reset to "1234".
2. In case of master registration / deletion, fire / accident, etc.,
it is recognized as normal number mode.
Open the door in outdoor
Method 1
1. Enter password 2. Press [*]button
Open the door by password
Touch the outdoor
license plate to turn
on the LED and
enter the registered
password.
When you press the
[*] button, you will
hear a confirmation
tone and then open
when you open
the door.
Loading...