Commax CDV-35U User Manual

Download

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

User Manual

www.safemag.ru

Color video door phone CDV-35U

Table of contents

www.safemag.ru

1. Greetings ..............................................................................................................1

2. Warnings and caution ...........................................................................................2

3. Parts and function .................................................................................................4

4. How to use this product ........................................................................................5

5. Initialization (RESET)............................................................................................8

6. How to install.........................................................................................................9

7. Wiring..................................................................................................................10

8. Parts list .............................................................................................................12

9. Miscellaneous .....................................................................................................12

10. Specification......................................................................................................13

1. Greetings

● Thank you for choosing COMMAX.

● Please read this manual carefully before you use the product.

2. Warnings and caution

Warning

Caution

Prohibition.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

It may cause a serious damage or injury if violated.

It may cause a minor damage or injury if violated.

Power & Installation

Warning

Please don䯱t use several products at the same time on one power socket. 䯦It may cause a fire due to an

abnormal overheating.

Please don䯱t bend the power cable excessively or it may cause an electric shock. 䯦fire when using a damaged

power cable.

Please don䯱t handle the power cable with a wet hand. 䯦It may cause an electric

shock.

Please plug out the power cable from the socket when not using it for a long period of time. 䯦It may shorten the product

lifespan or cause a fire.

Please don䯱t install the product in the place where there is much oil, smoke or humidity. 䯦It may cause an electric

shock or fire.

Please don䯱t install the product with the lightening and thunder. 䯦It may cause an electric

shock or fire.

Please don䯱t use and connect this product with other products with different rated voltage 䯦It may cause a disorder or

fire.

When installing the product that generates heat, please install the product away from the wall (10cm) for the ventilation. 䯦It may cause a fire due to

the increased internal temperature.

www.safemag.ru

Please follow the things described below in order to prevent any danger or property damage.

Cleaning & Use

Please don䯱t disassem ble, repair or rebuild this product arbitrarily (please contact the service center if a repair is needed. 䯦It may cause an electric

shock or fire.

Please plug the power cable firmly into the inner end 䯦It may cause a fire.

Please hold the plug tightly when unplugging the power cable (a part of the copper wire may be disconnected if the grabbing is only made on the cord when pulling out the cable). 䯦It may cause an electric

shock or fire

When connecting the power cables after cutting the cable, please install the product with power off 䯦It may cause an electric

shock or fire

When installing the product, please fix it firmly while using the wall-mounting unit and screws. 䯦It may cause an injury from

the falling object.

Please be careful when using an AC circuit breaker since there is a possibility of an electric shock.

When cleaning the product, please rub it with a soft and dry cloth after plugging out the power cable. (Please don䯱t use any chemical products such as wax, benzene, alcohol or cleanser.)

Please don䯱tdrop the product on the ground and don䯱t apply ashock . 䯦It may cause a failure.

Please use the designated connection cable within the maximum calling distance designated for the product 䯦It may reduce the product

performance.

Please check the use voltage and current for the DC-only products and use the appropriate rectifier. 䯦It may cause a fire.

Please avoid direct rays of the sun or heating devices at a time of installation. 䯦It may cause a fire.

Please don䯱t install the product on an unstable place or small support board. 䯦It may cause an injury if it

falls down while in use.

If an abnormal sound, burning smell or smoke is coming out of the product, please plug out the power cable and contact a service center. 䯦It may cause an electric

shock or fire.

Please don䯱t insert any metallic or burnable materials into the ventilation hole. 䯦It may cause an electric

shock or fire.

Please use only the designated batteries for the products of using DC power. 䯦It may cause an electric

shock or fire.

Cleaning & UsePower & Installation

Warning

Caution

www.safemag.ru

3. Parts and function

嗻

www.safemag.ru

1 POWER SWITCH 7 DOOR RELEASE BUTTON/UP BUTTON

2 POWER AND DISPLAY LED 8 MENU BUTTON

3 MICROPHONE 9 TALK BUTTON

4 LCD MONITOR 10 SPEAKER

5 MONITOR BUTTON 11 CONNECTION TERMINAL

6 INTERPHONE BUTTON / DOWN BUTTON

1. POWER SWITCH : ON/OFF switch

2. POWER AND DISPLAY LED : blue in power on mode and light-out in power off mode.

3. MICROPHONE

4. LCD MONITOR

5. MONITOR BUTTON(ENTRANCE) : to check the situation of entrance.

6. INTERPHONE button: to call the interphone.

(UP BUTTON : to level up in the menu)

7. DOOR RELEASE BUTTON: to release the door for visitor.

(DOWN BUTTON : to level down in the menu)

8. MENU BUTTON : to enter or exit the menu for screen control, call sound and receiver volume

9. TALK BUTTON : to answer for visitor.

10. SPEAKER

Name

ERMINAL FOR EXTERIOR : terminal for product upgrade, entrance camera and interphone

www.safemag.ru

11. T

connection.

4. How to use this product

1. Call from the visitor

① When the visitor calls from the entrance(door camera), the calling sound rings and the image

of the visitor is shown on the screen.

② If you press the talk button, you can talk with door camera. By pressing the door release but-

ton, door will be released. (Door release works only while talking.)

Please note that this function is possible only when the door camera is interlocked with door

(

release function.)

③ 3-way communication is possible when another user picks up the handset of extended inter

phone, when you are talking with door camera on video door phone.

(Entrance-Household -Interphone simultaneous communication mode)

④ If you press the talk button, again talking is finished and video door phone turns to stand-by

You can install additional camera. In case of receiving call from camera 1, blue LED

mode. (

blinks. In case of receiving call from camera 2, purple LED blinks.)

2. Call with additional interphone

2-1. Call between door camera and interphone

① When the visitor calls from the door camera, calling sound rings on interphone and video door

② By picking up the handset of interphone, you can talk with door camera. By pressing the door

2-2. Talk between interphone and video door phone(household).

(1) In case of receiving the call of household phone from interphone

① In order to call the household from interphone, pick up the interphone handset and press call

② You can talk with interphone by pressing the call button of household or interphone button.

phone.

release button, door will be released.

button. Then, video phone will be ringing.

③ 3-way communication is possible between household, interphone and door camera when visi-

www.safemag.ru

tor calls from door camera, while household is talking with interphone. Image from door cam-

era is displayed on the screen of household with calling sound and 3-way communication gets

available.

④ If you press the interphone button or talk button after ending the call

(2) In case of calling interphone from household ① Press Talk Button and Interphone Button in order to call the interphone.

(Interphone is called only while the interphone button on household is being pressed.)

② When you receive the call from interphone, enjoy the call.

3. Monitoring : function to see the image of visitor in the entrance.

(On stand-by mode) Operation

- By pressing the Monitor button repeatedly, the monitor will work as following in order.

Camera 1  ( Camera 2)  OFF  Camera 1  ......

(On talking mode) Operation

- By pressing the Monitor button repeatedly, the monitor will work as following in order.

Camera 1  Camera 2  Camera 1  Camera 2  ......

[Caution : If you use only 1 camera, press monitor button while talking, the call with

entrance will be ended.]

4. Volume control (ringing sound/receiver sound)

(1) Call volume control : adjustable on stand-by status.

① Press the menu button one time on stand-by status. ② Red LED will be turned on(lighting) : call volume control mode. ③ Adjust it with UP(door release) / DOWN(interphone) button.

(2) Receiver volume control : adjustable while talking

① Press the menu button one time while talking. ② Red LED will be turned on(lighting) : receiver volume control mode ③ Adjust it with UP(door release) / DOWN(interphone) button

Ringing sound of new size will ring one time when controlling by pressing control button in

(

order to check the volume)

- Volume of ringing sound and receiver sound consists of 3 steps and you cannot change it

www.safemag.ru

any more despite pressing UP/DOWN button with certain sound (beep beep sound)in

Max/Min status.

5. Image setting_ BRIGHT / CONT / COLOR adjustment (available when the screen is on)

 The image setting mode will be sequentially operated when user presses the menu button as

follows.

- Calling : BRIGHT  CONTRAST  COLOR  RETURN  BRIGHT  ...

- Talking : Receiver sound adjustment  BRIGHT  CONTRAST  COLOR  RETURN  Receiver sound adjustment  BRIGHT  ...

5-1. BRIGHT brightness adjustment

- Press the menu button once when the image is on.

(LED lamp will be changed from blue to red.)

Red LED blinks fast. [◦◦◦◦]

- You are in brightness adjustment mode.

- Press the UP(Door release) / DOWN(Interphone) button in front of the product in order to

adjust the brightness.

- After completing the set, save the revised setting value by pressing the menu button.

(LED lamp will be changed from red to blue.)

5-2. CONTRAST contrast adjustment

- Press the menu button twice when the image is on. (While talking: 3 times)

(LED lamp will be changed from blue to red.)

Red LED blinks slowly. [◦◦◦◦◦◦◦◦]

- You are in CONTRAST adjustment mode.

- Press the UP(Door release) / DOWN(Interphone) button in front of the product in order to

adjust the CONTRAST.

- After completing the set, save the revised setting value by pressing the menu button.

(LED lamp will be changed from red to blue.)

5-3. COLOR color adjustment

- Press the menu button three times in the state of the image on. (while talking 4 times)

(LED lamp will be changed from blue to red.) Red LED blinks very slowly. [◦◦◦◦◦◦◦◦◦◦◦◦]

- You are in COLOR adjustment mode.

www.safemag.ru

- Press the UP(Door release button) / DOWN(Interphone button) button in front of the product in

order to adjust the condition of the COLOR.

- After completing the set, save the revised setting value by pressing the menu button.

(LED lamp will be changed from red to blue.)

Reference : if you press the menu button, menu mode will work as follws. Stand-by : Ringing sound adjustment  return  Ringing sound adjustment  ... Calling : BRIGHT  CONTRAST  COLOR  return  BRIGHT  ...

Receiver sound adjustment  BRIGHT  CONTRAST  COLOR  return 

Talking

Receiver sound adjustment  ...

 Menu according to LED condition.

1. Ringing sound adjustment(stand-by) : red LED lighting (on)

2. Receiver sound adjustment(talking) : red LED lighting (on)

Image brightness adjustment(image–monitoring/call) : red LED flickering (blinking at a fast

pace)

4. Image contrast adjustment(image-monitoring/call) : red LED flickering (blinking at a normal

pace)

5. Image color adjustment(image-monitoring/call) : red LED flickering (blinking at a slow pace)

[Caution : menu will be over if there’s no key input for 5 seconds with toot toot sound in

the state of menu.]

 Press the interphone button and door release button at the same time for about 3 seconds.

5. Initialization (RESET)

Then, image setting value and sound volume will be initialized.

6. How to install

www.safemag.ru

1. Installation Method of Video Door Phone

SCREW M3 (1EA)

SCREW T4 (4EA)

Note

① Avoid the range of direct sunlight ② Recommended height is pertinent from 1450 ~ 1500mm ③ Avoid the installation near magnetic activity, humid temperatures and gas

2. Installation Method of Camera

SCREW PHM 3X8

SCREW CAP

Note

① Do not install the camera where it is exposed to Direct sunlight ② Keep cleaning up its lens to capture good views.

DRC-41QC

7. Wiring

www.safemag.ru

Camera connector

The wiring of this equipment is as follows,

1. Red : Voice 2. Blue : GND 3.Yellow : DC 12V 4.White : Video

When using UTP CABLE[CAT.5] for better image quality, connect the rest 4 lines to GND after con-

necting 4 lines with monitor and camera.

poollaarriittyy

• Each device should be connected by separated cables.

Wiring precautions

use CAMERA 1, CAMERA 2 and interphone using UTP CABLE[CAT.5], 3 lines of UTP cable

are required.

DOOR Camera wiring

www.safemag.ru

• When using UTP CABLE[CAT.5] for better image quality, connect the rest 4 lines to

GND after connecting 4 lines with monitor and camera.

DOOR Camera wiring

• When using UTP CABLE[CAT.5] for better image quality, connect the rest 4 lines to

GND after connecting 4 lines with monitor and interphone.

8. Parts list

www.safemag.ru

① Body of CDV-35U

④ T4 X 18(4EA)

Screw for wall mount

⑤ M3 x 6(1EA) Screw for body

② Bracket for wall mount

⑥ 4P Connector(2EA)

③ Manual

① Main body(CDV-35U) ② Bracket for wall surface mounting ③ User Manual ④ Screw for wall bracket (SCREW GH1T 4X18 ZnY) - 4EA ⑤ Screw for body (SCREW PHM 3X6 ZnY) - 1EA ⑥ Camera connector (CONN. 4PX300) - 2EA

9. Miscellaneous

Please carefully read this User Manual before calling service

●

After checking the entire list, please contact customer service center. We will do our best to make you satisfy with our services.

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com

www.safemag.ru

PM0735U00010

Printed In Korea / 2012.05.104

10. Specification

www.safemag.ru

Spec

Model

CDV-35U

Rating Voltage 100-240V~, 50/60Hz (FREE VOLTAGE)

Consumption Operation: 10W(MAX)

Transmission Entrance 4wires polarity, interphone 4wires polarity

Screen size 3.5" TFT-DIGITAL LCD

Call mode HANDS FREE Call mode (Voice switch circuit)

Entrance : electronic chime,

Ringing sound

Screen Display

Interphone : electronic buzzer

60 ±10sec (During conversation)

30 ±10sec (During monitoring)

Distance

(Cable thickness)

28m(Ø0.5) / 50m(Ø0.65) / 70m(Ø0.8)

Working temperature 0 ~ +40°C (32°F ~ 104°F)

Dimension 180.0(W)X180.0(H)X28.5(D)

Commax CDV-35U User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual