Commax CDL-811R, CDL-811P User Manual

Products specifications and components

channels

format

RFID 13.56Mhz 1 ASK 93.5dBu/u nder m@ 10m

(optional)

No Name Specifications

Key formula only

the fingerprint registered.

No Name Specifications

button.

2 Interlocking pack Receive (CDL-447, optional)

3 Registration button It is used to register or change password or smart key

door.

(Square locking type)

6 Latch bolt It serves to keep the door shaken

7 Alkalina AA battery It is a power source that operates the door lock.

attention.

9 Indoor handle It is used to open or close the door indoors.

Indoor Names and Functions

CDL-811P/811R

USER MANUAL

Durable Door lock without worry about A/S

Durable body of metal

Auto lock/rewind/double lock function

Use of 3D touch and imaginary function to secure password

Password/Smart key/Fingerprint can be registered multiple

Multi-level volume control / Selectable silence function

Light button that is visible even in dark places

Emergency power function (9V square battery)

High-voltage protection/Fire protection/Anti-hack system

Intuitive registration UI

COMMAX Co., Ltd.

Thank you for purchasing COMMAX products.

Before you use, please read this manual and use

correctly. COMMAX is not responsible for any safety

accident due to abnormal operation of the products.

Due to non-key door lock, it may cause

destruction of digital door lock when it is in trouble.

Warning for Safety

These warnings are to secure user’s safety and prevent the possible loss of property.
Please read carefully below to use the product in a correct manner.

* Do not disassemble, repair or modify the device by any unauthorized person.
* This product is for indoor, we do not guarantee any operation at other environment.
* Please use the product after reading User’s Manual.
* Do not press the buttons with any tools(Ex. Awl, Pins..)
* Change your access code from time to time for your safety.
* Do not impact on the device.
* Be careful that leakage or rupture may occur when inserting a battery in wrong direction.
* Be careful that water should not seep into the device.
* When replacing a battery, change all the batteries with new alkaline batteries.
* Please wipe the product with soft, dry towels.
* Please keep product warranty card for A/S.
* Do not use this product with other purposes except digital door lock function.

Sort Specifications

Op

ening method

Rated volt age DC 6V LR6 1.5V AA sized alkaline batteries 8

Emergency power DC 9V Alkaline batteri es 8 (Separate purchase)

Type of product

High temperature sensing Temperature sensor type 60+-10 dgrees

material

Sort Using frequency

Wireless devic es for

afety syste ms

Outbody

Installation
instruction

Inbody

User manual

CDL-811 P(Fire-proof, temperature-sensitive form, key primary keylock / F-T-K-M)

Mortise & Stricker(Option1) Screw

8 Batteries

Password 4-12 digits ( Up to 4 can be registered)

RF key It can register wit hin 30

Fingerprin t It can register within 100

Wallpad interlock Optional ( CDL-447)

Out body AL,ZN,ABS,PC

In body AL,ZN,ABS,PC

Number of

447.275Mh z 1 FSK 10mW/under

Construction diagram

Modulation

Big Mortise & Stricker(Option2)

4 Smart key

Antenna power

2 Emergency
(Key formula only)

*The components of the product may change depending
on the installation environment.

Outdoor Names and Functions

1 Name board Enter the number when registering or changing password.
2 Battery warning light Turns on with an audible alarm at low voltage.

3 Smart key input unit

4 Emergency hole
5 Outdoor handle It is Used to open or close doors from outdoors.

6 Emergency power terminal

7 Fingerpirnt input unit

9V emergency battery
(Separate purchase)

It is the place where smart keys are recognized to open the
door. You can open the door by registering the smart key or
touching the registered smart key.

In case the battery is completely discharged, you can use
9V battery then, the power will be on.

You can register your fingerprint, open the door by using

Outdoor shaft

1 Battery cove r

4 Mortise

5

8 Double lock button

Dead bolt

MORTISE TYPE

This cover protects the batteries and the registrati on

It is attached to the side of the door and closes or locks the

It locks the door by locking it on the door frame.

It can be used to lock the door so that it can not be opened
outside,such as during nighttime hours that require

BIGMORTISE TYPE

How to register fingerprint

1. Press
[registration] button

2. After pressing
the existing
password, press
the [*] button

Open the battery cover and
press [registration]button

Beep

4. Contact fingerprint to be registered to fingerprint input unit

After contacting the fingerprint to the fingerprint
input part four times, register the registration
by pressing the [register] button on the room body.

Reference

1. Up to 100 fingerprints can be registered.

2. If registration is not in progress for 20 seconds,

registration will be canceled.

3. Press [4]button
in the number
plate of outdoor side

How to register and change password

Be sure to register your password with the door open.

1. Press
[registration] button

2. After pressing
the existing
password, press
the [*] button

3. Press [1]button
in the number
plate of outdoor side

Beep

Open the battery cover and
press [registration]button

4. Enter new password

After entering the new password(4~12 digits),
press * button and the confirmation tone sounds
and registration is completed. Press the * button
once more to end registration.

Reference

1. When adding the password, repeat the above item 3

before the number plate lamp turns off.

2. Up to 4 password can be registered

Cautions

1. If you register a new password, the existing password

will be automatically deleted.

2. Do not use consecutive numbers when registering your

password.

How to register Smart key

When registering or re-registering a smart key, you must register
all the smart keys you have at once. Also registered smart keys are
door lock only. It may not work when used with other products.

1. Press
[registration] button

2. After pressing
the existing
password, press
the [*] button

Beep

Open the battery cover and
press [registration]button

4. Contact smart key to smart key input unit

If you touch the smart key to be registered one by one,
you will hear a confirmation sound every time you touch it.
Registration is completed by clicking the [Registration]
button on the indoor side body.

Reference

1. When adding the password, please repeat the above

item 3 before the [License plate lamp] turns off.

2. Up to 30 smart keys can be registered.

Cautions

1. When registering a new smart key, the existing smart

key is automatically deleted.

3. Press [2]button
in the number
plate of outdoor side

How to register the linker (optional)

1. Press
[registration] button

Open the battery cover and
press [registration]button

Beep

4. Press the [Register] or [OP / CL] button on the linker

After pressing the front door button of the wall pad (video phone),
press the [Registration] or [OP / CL] button of the interlocker
when the standby mode is canceled.

Reference

1. You can register up to 5 interlocks.

2. Repeat step 3 when registering the linker.

How to delete fingerprint, smart key, linker

1. Press
[registration] button

Open the battery cover and
press [registration]button

Beep

4. Press #button

How to set auto lock, manual lock

Make sure to turn off the Mortise Square Lock on the indoor body.

1. Enter password 2. Press [#]button

3. Press [4] or [7]button and press registration button

Touch the outdoor
license plate to turn
on the LED and
enter the registered
password.

Auto lock setting: Press the [4] button and press the register
button to set the auto lock function after a confirmation
tone sounds.
Manual lock setting: After pressing the [7] button and pressing
the register button, the manual lock function is set after a tone
is heard.

2. After pressing
the existing
password, press
the [*] button

2. After pressing
the existing
password, press
the [*] button

Press and hold the [#] button for 5 seconds to delete
the registered fingerprint, smart key or interlock.

3. Press [3]button
in the number
plate of outdoor side

3. Press number
in the number plate

- Smart key deletion: No 7 button

- Deleting the interlock: No 8 buttons

- Delete fingerprint: No 9 button

Press the [#] button
twice in succession

How to set and dismiss 3D touch

1. Enter password 2. Press the [#] button twice in

Touch the outdoor
license plate to
turn on the LED
and enter the
registered password.

succession, then press
the 0 button.

3. Press [Registration]button

When you press the [Registration] button on the outdoor

Beep

Open the battery cover and
press the [Registration] button.

side body, the 3D touch function is turned on or off.

- Set tone: Piriricic

- Off sound: Piric

Reference

1. It is a function to strengthen the security of password

and it is a function to set a virtual number instead of the

original number when the password is registered and

authenticated for more than 1 second.

Ex) When 1 is long pressed: It is recognized as a virtual

number other than 1.

2. Combined with the imaginary function of this product,

password security is further strengthened.

3. You can set each number and you can check that the

lamp blinks when you press for more than 1 second.

4. 3D touch mode is turned off at the factory.

Cautions

1. When the 3D touch mode is released, the password is

reset to "1234".

2. In case of master registration / deletion, fire / accident, etc.,

it is recognized as normal number mode.

Open the door in outdoor

Method 1

1. Enter password 2. Press [*]button

Open the door by password

Touch the outdoor
license plate to turn
on the LED and
enter the registered
password.

When you press the
[*] button, you will
hear a confirmation
tone and then open
when you open
the door.

Method 2

Set lock Indoor Outdoor

Automatically locked after
2 seconds after

Locked automatically after 2
seconds after door closes

on the indoor side body

during 2 secods

ion

4 times ⇒ [Registration] button

[Registration] button ⇒ password ⇒ * ⇒ [9] button ⇒ [#] button More than

ter

ition

nds

CL]

han

Auto lock: Auto lock when the door is closed

Manual Locking: Press the [Internal Dual Locking] button

n

⇒

Press the [Register] button

Enter the password ⇒ Press the [#] [#] button ⇒ Press the [7] button ⇒

Enter the password ⇒ Press the [#] [#] button ⇒ Press the [8] button

Enter the password ⇒ Press the [#] [#] button ⇒ Press the [0] button ⇒

⇒

Press the [Register] (On/Off)

Normal mode

c locking

Open door with smart key

1. Contact smart key to smart key input unit

When the registered [Smart Key] is touched to the
smart key input part, a confirmation tone is heard
and it opens when you open the door.

Method 3

Open door by interlocking(Optional)

1. Press the [OP/CL] button on the interlock

Press the [OP / CL] button on the interlock to
open the door.

Door locking in indoor and outdoor

Auto lock

Manual lock

Press the [double lock] button

Touch the number plate

Deactivation from outdoor unit

1. Input Password 2. Press [#], [9] button

When LED lights
on, input password

Press [#] then press [9],
indoor dual lock is off
with beep sound

Dual authentication / Registration authentication setting

1. Input password 2. Press [#] button twice,

Touch number
plate. When LED
lights on, input
registered
password

3. Press [Regist.] button.

Beep

Open the battery cover and
press [registration]button

press [1] or [8] button.

[1] : Dual authentication
[2] : Registration
authentication

Once press [Regist.] button on outdoor body,
Dual authentication or registration authentication
mode is on or off.
Active: Sound - Bee ri ri rik
Deactive: Sound - Bee rik

Volume Adjustment

Deadbolt of indoor unit must be come out from mortise before setting

How to

1. Input Password 2. Press [#] button

When LED lights on
after touching
number plate,
input registered
password

3. Press [3] or [6] to adjust volume

[3] for volume up
[6] for volume down

Reference

1. Available total 8 levels of volume sound

2. If sound pause mode, numbers are only flicking

without sound

Reference

1. When you press [double lock] button in manual lock

mode, you will hear a "beep" buzzer sound when the door

is locked and inform you that the door is lockedv.

Internal double lock setting

It is a function that can not open a door with a password or a smart
key outside the door.

Setting

1. While the door is locked, press and hold the [double lock]
button for 3 seconds

If you press and hold the [DUAL LOCK] button for
3 seconds, the setting is completed with "OK" sound.

How to release internal

1. Push or pull the knob
from inside to open the door

2. Press the [double lock]
button inside and dismiss

Reference

1. If dual authentication mode is activated, Password +

Card should be confirmed to open to door.

2. If registration authentication mode is activated,

first authentication by existing password should be done

for the next step.

* No dual authentication is activated if factory setting.

* Registration authentication is activated if factory setting.

* To deactivate dual authentication / registration

authentication, repeat the same procedure for activation

BURGLAR ALERT

If door to be opened by abnormal operation such
as door gap break through, burglar alert rings
with more than 80db noisy sound.

How to deactivate burglar or temperature alert

Remove batteries or [password + *] , [smartkey touch]
* if temperature is too high, no deactivation.

BATTERY REPLACEMENT ALERT

If battery alert light is on on number plate or beep sounds ring, battery has to
be replaced. All batteries must be replaced with new one at once.

Caution

1. Lifetime of battery can be varied according to

manufacturers, date of production, working condition.

(Expected lifetime : 10 months assuming no wireless

operation, AA type alkaline 8ea, 10 times per one day use)

2. If battery liquid leaks out, product can be damaged.
Regular checking is recommended – every 6 months.

3. Battery lifetime might be shortened if wireless module

is activated.

CDL-811P

CDL-811R

Sound Pause Mode

Temporary silence function (1 time) regardless latest volume setting

How to

1. Touch number plate and press [#]

2. Press [*] after password or, contact Card / Fingerprint to
open the door.

Reference

Sound is back to the original volume if pause mode is

operated once

High Temperture Alarm

Once extremely high temperature is detected
(60℃± 10℃), locker is automatically
released to open the door with
huge sound to secure user’s
safety.

Emergency Power

When door can not be opened due to fully discharged battery.

1. Contact the terminals of 9V battery to emergency power outlet

Press [Password] and [ * ] to open the door while contacting
terminals of 9V battery to emergency power outlet.

9V emergency battery
(sold separately)

Emergency Key

When door is not opened due to malfunction.

Open the bottom cover of outdoor body to use
mechanical key box. Key-in to open the door
for emergency release.

Caution

1.Your mechanical key is recommended to be stored

outside of the door for emergency use.

Factory Reset Mode

1. Press [Regist.] button. 2. Input “123578951” when
number plate lights on

BEEP

Open the battery cover and
press [Regist.] button for 5 secs

3. Press [#] button for 2 secs.

Factory default mode is completed with beep sound.

Caution

1.All settings back to the default after factory reset

Anti-mischief alert and 1 minute pause

If unregistered [password], [smartkey], [fingerprint] keeps used more than 5 times

continuously, freeze operation for 1 minute with alert sound.

Try 5 times
in a row??

Reference

1. To deactivate alert sound, open the door from indoor body

handle

2. If mechanical key is available, deactivate alert sound by key

Deadbolt Jam alert

When deadbolt is jammed during door
open/close, alert sound of
bee bee bee bee” rings 3 times.

Caution

1.If no sound deactivation or door lock malfunction,

product installed position has to be adjusted.

Please contact your local installer or service provider.

Door Open Alert during automatic lock setting

To inform door open status during automatics lock
setting, alert sound rings 2 times with each 15 minutes
interval if door opened.

Self-Diagnosis Table by each LED number flicking

To see the status of product by means of checking flicking number

ACTION SELF-DIAGNOSIS

Flicking ALL LEDs -Anti-mischief alert and 1 minute pause

Flicking LED number 2 -Error on password, card, fingerpr int set

Flicking LED number 3

Flicking LED number 4 - Deadbolt Jam

Flicking LED number 5 - Burglar Alert

Flicking LED number 6 - Unregistered password, card, fingerprint

Flicking LED number 7 -

Flicking LED number 8 - Fire Alarm

Flicking LED number 9 - Dual lock from Indoor unit

Flicking LED number 0 - Malfunction of fingerprint module

- Full of r egistered fingerprint.

- Full of r egistered password, card, BLE device

Already registered address

Summary of how to use

Function Default

Fingerprint registration

Delete all fingerprints

Password registration/change 1234

Card registration None

Delete all card

Interlocking registration None

Delete the all interlocking

Open the door indoors

Clos

e the door indoors

Open the door outdoors

Close the door outdoors

Auto lock setting

Manual lock setting

Set dual

authenitication mode

Set registration

authenitication mode

3D touch authenitication mode Release

Internal dual lock LED setting Release

Internal force lock setting Press and hold the [Internal force lock] button for 3 seconds

Release internal force lock

Etiquette mode function

Buzzer volume setting

Release alram sound

[Registration] button ⇒ password ⇒ * ⇒ [1] button ⇒ Fingerprint registrat

5 seconds
[Registration] button ⇒ password ⇒ * ⇒ [2] button ⇒ Password to regis
⇒ [*] button
[Registration] button ⇒ password ⇒ * ⇒ [3] button ⇒ Card (tag) recogn
(Continuous registration) ⇒ [Registration] button

[Registration] button ⇒ pas sword ⇒ * ⇒ [7] button ⇒ [#] button More than 5 seco

[Register] button ⇒ password ⇒ * ⇒ [4] button ⇒ Remote control [OP /
⇒ [Registration] button
[Registration] button ⇒ password ⇒ * ⇒ [8] button ⇒ [#] button More t
5 seconds

Door lock handle: Push the manual opening / closing device towards the door.

Password: LED of window number LED ON ⇒ Enter password ⇒ Press [*] butto

Card: Card contact with card recognition

Emergency key: Rotate after inserting emergency key into Emergency key insertion part

Auto lock: Auto lock when the door is closed
Manual locking: Touch the licen se plate of the window
Enter the password ⇒ Press the [#] [#] button ⇒ Press the [4] button

Automati

Press the [Register] button
Enter the password ⇒ Press the [#] [#] button ⇒ Press the [1] button

Release

(Individual authenticati on / Dual authentication)
⇒ Click the [Register] button

Release

(General registration / double registration)
⇒ Click the [Register] button

Press the [Register] button
Set sound (beep sound), release sound (beep sound)
Enter the password ⇒ Press the [#] [#] button ⇒ Press the [5] button

Indoors: manual opening and closin g with door open and door closing

Outdoors: Enter the password ⇒ Press the [#] button ⇒ Press the [9] button

Password: Press [#] button ⇒ Enter password ⇒ Press [*] button
Treble: Enter password ⇒ Press [#] button ⇒ Press [3] button
Bass: Input password ⇒ Press [#] button ⇒ Press [6] button
Indoor: When battery is removed
Outdoors: Password, card authentication