Digital Door Lock CDL-30LR / 30LRC
User Manual
COMMAX CO.,Ltd.
•
Thank you for purchasing COMMAX products.
•
Please carefully read this User’s Guide (in particular, precautions for safety) before using a product
and follow instructions to use a product exactly.
•
The company is not responsible for any safety accidents caused by abnormal operation of the product.
Product Feature
Durable door lock without A/S
We produce this door lock under strict quality assurance systembased
on KS certification
Durable body using metallic material
We design the durable body using metallic material for suitable
for fire or impact
Automatic lock / Re-lock / Double lock functions
We think the customers security and convenient so it is easy
to use and very safety.
Safe to use the pin number with dummy number
You can use your pin number safely with dummy pin number.
Multi-registrations for pin-number & electronic key
It is easy to register the pin-number(up to 4) and you can also
register the electronic key(up to 30 ea).
Multiple volume control / optional mute
You can easily adjust the volume up to 7 phases.
Easy to detectable Blue-light button
You can easy to use the device using blue-light keypad buttons
Emergency power(9V square battery)
You can use the digital door lock using emergency power even
if the batteries run out completely.
Anti high-voltage / anti fireproof / anti-hacking system
It is very safe for using anti high-voltage and anti-hacking system.
Also if the temperature is higher than certain temperature,
the door will be open automatically with warning sounds
under the fire.
Warning
Don’t install, repair or
disassemble the
device randomly.
Don’t push or insert
the button with drill
or pin.
There may be some
burst or leakage from
batteries if you insert
the batteries reversely.
This devise is for the
fire door products,
so it may not operate
for other environment
normally.
To Change the
pin-number regularly
for the safety.
Don’t put water into
the device.
Use the device after
reading the user
manual.
Don’t impact on
the device.
To replace the battery,
you need to replace
all new alkaline
batteries.
When you clean the
device, please use
the dry towel.
A / S and please keep
the product warranty.
Product warranty
Don’t use it for other
purpose except digital
door lock.
Product Feature
Specification & features
Part names
How to use
Convenient functions
(Optional)
Emergency alarm
Setting the Pin-number
Setting the electronic-key
Deleting the electronic-key
Opening the door at outside
Locking the door at outside
Opening the door at inside
Locking the door at inside
Locking the door by force
Setting & deleting the manual
locking LED function
Setting the automatic locking
Setting the manual locking
Setting the sound temporary pause
Setting the sound volume
Setting the detection of RFID with
automatic or manual
Setting the connecting of remote
controller
Alarming the high temperature
Alarming the break-in
Alarming to prevent the trick &
function of stop operating 1 minute
Alarming the jam of square catches
Warning the battery replacement
Emergency power
Emergency Key
Cause of disorders & Solution
1 ch
Specification & features
Division
Specification of product
Spec.
Applicable
Access methods
Power Source
Emergency power
Type of product
Temperature alarm
Material
Normal fire door
Pin number
Electronic Key
Anti-fireproof type, Temperature sensor type, Key type, Master key door lock(D-F-T-K-M)
Fireproof type, Temperature sensor type, Key type, Master key door lock(D-NF-T-K-M)
DC 6V
DC 9V
Temperature sensor
Outer body
Inner body
Thickness 35mm ~ 50mm
4~12 digit number combination (Up to 4 pin number)
Up to 30 keys
Alkaline AA battery, 4 pcs(LR6 1.5V AA size)
Alkaline battery(Optional)
72 degree ± 5 degree (lat tested)
62 degree ± 5 degree(Normal test)
Al, Zn, Pc
Al, Zn, ABS
RF Specification
Item
RFID
Wireless devices
For safe system
Frequency
13.56Mhz
447.275Mhz
1 ch ASK
Under 93.5dBuV/m@10m
FSK Under 10mW
Channel Modulation Power
Features
Outer body Inner body
Remote controller
(CDL-30LRC only)
Mortise Sticker Screws
User manual
Battery 8 pcs Warning sticker
Drawing for screw hole
Electronic key 4 pcs
Emergency key 2 pcs
(Key type only)
Outdoor shaft
Part names
Outer body
Emergency 9v battery
(not supplied)
No. Name Feature
Key buttons
Electronic keyhole
Battery warning light
Emergency key cover
Emergency key hole
Outer handle
Terminal for
emergency power
To use to register or change the pin number.
You can open the door with registered pin number.
You can open/register the electronic key.
Light will be on with low power with warning sound.
Key type only
Key type only
To use open/close the door at outdoor.
When the battery is discharged completely, you can operate
the devices with contact the 9V battery to the terminal.
Inner body
No. Name Feature
Battery cover
Registration button Using registration or change the pin number or electronic key
Button for double
lock
Cover for battery and buttons for registration of pin number & electronic key.
You can lock the door and it can’t be opened at the outside such
as night time.
(LED will be blinking when the door is unlock under manual locking mode.)
Mortise
Dead bolts
Wrench bolts
Alkaline AA battery
Button for manual lock
Inner handle
It is the device to lock or close the door for installing side of door.
It can lock the door to door frame
It can prevent to shake the door.
Power for operation door lock
Using lock the door under manual mode
Using open or close the door at inside.
How to use
Setting the Pin-number
Warning!
Please set the pin number
while you open the door.
Open the battery cover,
Push the registration button once
then you can hear “Beep” sound
Go to outside
Lift up the cover of keypad and
check the lights on in the keypad.
Outside
Set the pin number 4 to 12 digits.
Outside
button than the registration Push the
Set the pin number 4 to 12 digits.
If you add the other pin-number, you repeat ③, ④ until turn off the
Note
lights on keypad. (Pin number can be registered up to 4 pin numbers.
The registration will be canceled when you do not push any numbers
Warning!
for 10 seconds after push the registration button. If you register new
pin-numbers, old one will be deleted automatically.
Setting the electronic-key.
Warning!
If you register or re-register new electronic-keys,
you need to register all electronic-keys at once.
Open the battery cover, Push the
registration button once then you
can hear “Beep” sound.
Go to outside
Lift up the cover of keypad
Outside
Contact the electronic-key to the
electronic-key receiver in order.
(You can hear the sound when you
register each electronic-key)
Outside
You can complete the registration
when you close the cover of
keypad or push the [ ] button on
the keypad.
“Beep”“Beep”
“Beep”“Beep”
If you add the other electronic-key, you repeat
Note
③, ④ until turn off the lights on keypad.
(Electronic-key can be registered up to 30.)
The registration will be canceled when you do not contact any
Warning!
electronic-keys for 10 seconds after push the registration button.
If you register new electronic-keys, old one will be deleted
automatically.
Go to outside
Outside
How to use
Deleting the electronic-key
Open the battery cover, Push the
registration button once then you
can hear “Beep” sound.
Check the light of key numbers.
Push the buttons for 5 seconds,
all the electronic-keys will be deleted
with the sound.
5 sec.
Opening the door at outside
No.1
Using pin-number
Touch the key and
push the pin-number.
Push the button,
you can hear the sound
and open the door.
“Beep”“Beep”
SEC
.
Opening the door at outside
No.2
Using electronic key
Contact the registered electronic
key to the receiver.
You can hear the sound and
open the door
Locking the door at outside
No.1
In the case of setting the automatic lock
The door is locked automatically after
2 seconds when you close the door.
(Refer to page. 14)
No.2
In the case of setting manual lock
The door is locked when you push the
[*] buttons on keypad.
(Refer to page. 14)
How to use
Opening the door at inside
If you do not open the door within
Warning!
7 seconds after you pull the inner body’s
handle down, the door will be locked automatically.
SEC.
No.1
Pull the handle down
The door is locked, you can open
the door with pulling the inner body’s
handle down, you can open the door.
Warning!
If the door is opened to the inside, please do not install the devices
Locking the door at inside
No.1
No.2
Locking the door by automatic
The door is locked automatically after
2 seconds when the door is closed.
(Refer to page. 14)
Locking the door manually
You can lock the door pushing the
[Manual lock] button when the door
is unlocked.
SEC.
Warning!
If you push the [Manual lock] button when the door is locked,
you can hear the sound to notice you that the door is locked.
Locking the door by force
Inner double lock
Disable to use pin number or electronic key outside of room
Setting
When the door is locked,
Push the [Double lock] button
for 3 seconds in inner body,
the setting is completed with sound.
SEC.
Cancel
It will be cancelled if you open the door to pull
the inner body’s handle down.
Setting & cancel the manual lock LED function
When the door is unlocked under manual lock mode, the LED will be blinking and LED
will not be blinking when the door is locked.
Setting & cancel the LED ON function
(Manual lock LED function will be set at first.)
When the door is
locked, to touch the
outer body’s key.
Note
Under the emergency alarm such as fire alarm or break-in, LED will be blinking for 2 minutes.
When the low battery, LED will be blinking at once when the door is opened or closed.
Enter the
Pin-number.
Push the
button at once.
Setting : [2] button
Cancel : [0] button
Convenient functions(Optional)
Setting automatic door lock
This is the optional function to lock the door automatically.
Setting
After putting out
the inner body’s
mortise
(Square catches)
While you open the door
Touch the key of
outer body
Enter the pin-number
and button
twice
Setting manual door lock
This is the optional function to lock the door manually.
Setting
After putting out
the inner body’s
mortise
(Square catches)
While you open the door
Touch the key of
outer body
Enter the pin-number
and button
twice
Enter the [4] button,
the automatic door
lock function
will be operated.
Enter the [7] button,
the manual door
lock function
will be operated.
Note
The device will be set with automatic door lock function at first.
Setting the sound temporary pause
You can set the sound temporary pause at once whatever
you set the sound volume.
Setting
Touch the outer body’s key and push the
[ ] button.(You can’t hear any sounds)
Enter the [Pin-number]
(Only the lamps will be blinking)
Note
This is for only once, you can hear the operating sound in next time.
Setting the sound volume
You can set the sound volume.(You can use this functions when the door is locked)
Setting
Touch the key of
outer body
Note
You can set the sound volume with 7 different stage
Enter the
pin-number
The volume will be increased if you push [3] button.
The volume will be decreased if you push [6] button.
Under the temporary pause, the lamp of keypad is blinking
when you push the buttons.
Push [ ]
button
Push the
[3] or [6] button.
Convenient functions(Optional)
RFID automatic / manual detecting
Electronic key can be detected by automatically or manually.
Setting for automatic detecting
Touch the outer
body’s key
Enter the
pin-number
Setting for manual detecting
Touch the outer
body’s key
Enter the
pin-number
Push [ ]
button twice
Push [ ]
button twice
Push [1] button,
the automatic
detecting function
will be activated
with sound.
Push [1] button,
the automatic
detecting function
will be activated
with sound.
Note
With automatic detecting, the electronic key will be detected automatically
when you touch it to the key hole for electronic key.
With manual detecting, after you touch the outer body’s key, you can open
the door with touching the electronic key hole with electronic key.
The device will be set with automatic detecting at first
Remote controller
You can open the door with remote controller.(Remote controller model only)
Setting
“Beep”
Open the inner body’s
battery cover, push the
[Register] button
shortly with “Beep”
sound.
If you add another remote controller, repeat No.2 before lamp of key is off.
Note
(Register up to 5 pcs)
The registration will be canceled when you do not register any remote
Warning!
controller for 10 seconds after push the registration button.
If you register new remote controller, old one will be deleted automatically.
Cancel
“Beep”
Open the inner body’s
battery cover, push the
[Register] button
shortly with “Beep”
sound.
Open Register
Push the [Register] or
[Open] button on the
remote controller.
Push [0] button
Push the [*] button,
the registration will be
completed with sound.
Push [*] button more
than 5 seconds, all the
remote controller will
be deleted with sound.
Emergency alarm
Detecting high-temperature
If the digital door lock detect the high-temperature
(62℃±5℃) just like firing, it unlock the
door automatically with warning
sounds for safety.
Alarming the break-in
If the digital door lock detect the opening the door
abnormally, under the door is locked, there is the warning
alarm more than 80db.(For example, the door open by force)
Disable the warning of high-temperature & warning sound
You can disable the warning if you remove the batteries,
enter the pin-number or contact the electronic key.
It can’t be disable if the temperature is high.
Disable
the warning
Warning!
If the inner body is exposed to the direct sun lights, sun light for long time,
the warning sound can be activated by operating temperature sensor
The door will be unlocked even under “Inner double lock” situation
Alarming to prevent the trick & function of stop operating 1 minute
If you enter the un-registered pin-number or contact un-registered electronic key for
5 times in row, the digital door lock will be stopped for 1 minute with warning sound
5 times in row??
Alarming the jam of square catches
There will be “Bee, Bee, Bee, Bee”
warning sounds for 3 times when the square
catches(Dead volts) can’t operate in-and-out
normally or jammed.
Dead volts
(Square catches)
If the warning sounds keep ringing or operate abnormally,
Warning!
you may need to move the location of the digital door lock. In this case,
you may request the help to the customer service center.
Warning the battery replacement
If you hear “Beep, Beep, Beep”
sounds sound after operation normally,
you need to change the battery.
At this time, you need to replace
all the batteries for new one.
Note
Buy the 9V
alkaline
battery,
Warning!
If the batteries run out completely so you can’t open the door,
While contacting
the battery to
the terminal
of emergency
power
If the batteries run out completely, please replace all the batteries.
Do not use new batteries, used batteries or using batteries together.
Push the
[ ] button
“Beep, Beep, Beep”
After
entering the
pin-number
Push the
[ ] button,
the door will be
unlocked
with sound.
Emergency alarm
Emergency power
Note
Buy 9 V
alkaline
battery
If you can’t open the door when the batteries run out completely,
While contacting
the battery to
terminal of
emergency
power
Push [ ]
button
Emergency key(Key type Only)
Note
To remove
the cover of
emergency
key to the left
If you can’t open the door because of malfunctions,
Input the
emergency key
into the key hole
and turn to the
eft or right
When you hear
the releasing
sound of dead bolt
with “Tick”, remove
the emergency key
After
entering the
pin-number
Pull the
handle down,
the door will
be opened.
Push the
[ ] button,
the door will be
unlocked
with sound.
Close the cover
of emergency
key hole to move
to the right..
Cause of disorders & Solution
Please check the details as below
when the product is operating abnormally.
There is no Power.
Please check the batteries are disables or insert
right directions.
Please check if the batteries run out completely
or insert right directions.
Please replace all the batteries for new one.
(8 pcs of alkaline batteries).
Problem Check
Can’t change the
pin-number
Can’t open the door
when enter the
pin-number
Can’t open the door
using registered
pin-number
or electronic key.
There is a
warning sounds
“Beep~. Beep~. Beep~.”
When it operates.
Push the registration button with the “Beep” sound.
Please check the setting the pin-number of
user manual.
Check the registered pin-number currently.
If the light of keypad is out while you enter the pin-number,
you can’t open the door. Please push [ ] button
to operate the device and enter the pin-number once again.
(The light of keypad will turn out automatically if you don’t
enter anything within 7 seconds.)
Please try to use 9V emergency power.
Can be the disable of locking device.
Please contact the customer service center.
This is the warning sounds for change the battery.
If you hear that sounds, please kindly change the
new bettaries.(8 pcs of alkaline battery.)
Page
Page. 8
Page. 8
Page. 20
Page. 19
Can’t lock the door
automatically
Please set the automatic lock mode.
If the battery runs out, the device may not operate
but there will be operating sound.
Please replace all the batteries for new one.
Page. 14
COMMAX CO.,Ltd.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
Printed In Korea/ 2014.04.106
Loading...