Commax CDL-200P, CDL-200R User Manual

Products specifications and components

No Name Specifications

9 Indoor handle It is used to open or close the door indoors.

Indoor Names and Functions

CDL-200P/200R

USER MANUAL

Durable Door lock without worry about A/S

Durable body of metal

Auto lock/rewind/double lock function

Use of 3D touch and imaginary function to secure password

Password/Smart key can be registered multiple

Multi-level volume control / Selectable silence function

Light button that is visible even in dark places

Emergency power function (9V square battery)

High-voltage protection/Fire protection/Anti-hack system

Intuitive registration UI

COMMAX Co., Ltd.

Thank you for purchasing COMMAX products.

Before you use, please read this manual and use

correctly. COMMAX is not responsible for any safety

accident due to abnormal operation of the products.

Sort Specifications

Password 4-12 digits (Up to 4 can be registered)

Opening method

Rated voltage DC 6V LR6 1.5V AA sized alkaline batteries 8

Emergency power DC 9V Alkaline batteries 8 ( Separate purchase)

Type of product

High temperature sensing Temperature sensor type 60+-10 dgrees

material

Sort Using frequency

RFID 13.56Mhz 1 ASK 93.5dBu/u nder m@ 10m

Wireless devic es for

afety syste ms

(optional)

Outbody

Installation instruction

Inbody

User manual

CDL-200P SKF(Fire-proof, temperature-sensitive form, key primary keylock / F-T-K-M)

CDL-200PSNF(Fire-p roof, temperature-sensitive form, non-key, primary keylo ck / F-T-NK-M)

447.275Mh z 1 FSK 10mW/under

Mortise & Stricker(Option1) Screw

8 Batteries

RF key It can register within 30

Wallpad interlock Optional ( CDL-447)

Out body AL,ZN,ABS,PC

In body AL,ZN,ABS,PC

Number of

channels

Construction diagram

Modulation

format

Big Mortise & Stricker(Option2)

4 Smart key

2 Emergency (Key formula only)

Antenna power

*The components of the product may change depending on the installation environment.

Outdoor Names and Functions

Outdoor shaft

1 Battery cover

2 Interlocking pack Receiv e (CDL-447, optional) 3 Registration button It is used to register or change password or smart key

4 Mortise

6 Latch bolt It serves to keep the door shaken 7 Alkal

8 Double lock button

Dead bolt

(Square locking type)

ina AA battery It is a power source that operates the door lock.

This cover protects the batteries and the registration button.

It is attached to the side of the door and closes or locks the door.

It locks the door by locking it on the door frame.

It can be used to lock the door so that it can not be opened outside,such as during nighttime hours that require attention.

Due to non-key door lock, it may cause

destruction of digital door lock when it is in trouble.

Warning for Safety

These warnings are to secure user’s safety and prevent the possible loss of property. Please read carefully below to use the product in a correct manner.

* Do not disassemble, repair or modify the device by any unauthorized person. * This product is for indoor, we do not guarantee any operation at other environment. * Please use the product after reading User’s Manual. * Do not press the buttons with any tools(Ex. Awl, Pins..) * Change your access code from time to time for your safety. * Do not impact on the device. * Be careful that leakage or rupture may occur when inserting a battery in wrong direction. * Be careful that water should not seep into the device. * When replacing a battery, change all the batteries with new alkaline batteries. * Please wipe the product with soft, dry towels. * Please keep product warranty card for A/S. * Do not use this product with other purposes except digital door lock function.

How to register and change password

Be sure to register your password with the door open.

1. Press [registration] button

Beep

Open the battery cover and press [registration]button

3. Enter new password

After entering the new password(4~12 digits), press * button and the confirmation tone sounds and registration is completed. Press the * button once more to end registration.

2. Press [1]button in the number plate of outdoor side

No Name Specifications

1 Name board Enter the number when registering or changing password. 2 Battery warning light Turns on with an audible alarm at low voltage.

It is the place where smart keys are recognized to open

3 Smart key input unit

the door. You can open the door by registering the smart key or touching the registered smart key.

4 Emergency hole Key formula only (CDL-200PSKF) 5 Outdoor handle It is Used to

6 Emergency power terminal

9V emergency battery (Separate purchase)

open or close doors from outdoors.

In case the battery is completely discharged, you can use 9V battery then, the power will be on.

How to register the linker (optional)

1. Press [registration] button

Beep

Open the battery cover and press [registration]button

3. Press the [Register] or [OP / CL] button on the linker

After pressing the front door button of the wall pad(video phone), press the [Registration] or [OP / CL] button of the interlocker when the standby mode is canceled.

2. Press [3]button in the number plate of outdoor side

MORTISE TYPE

BIGMORTISE TYPE

How to set and dismiss 3D touch

1. Enter password 2. Press the [#] button twice in

Touch the outdoor license plate to turn on the LED and enter the registered password.

3. Press [Registration]button

When you press the [Registration] button on the outdoor

Beep

Open the battery cover and press the [Registration] button.

side body, the 3D touch function is turned on or off.

- Set tone: Piriricic

- Off sound: Piric

succession, then press the 0 button.

Reference

1. When adding the password, repeat the above item 3

before the number plate lamp turns off.

2. Up to 4 password can be registered

Cautions

1. If you register a new password, the existing password

will be automatically deleted.

2. Do not use consecutive numbers when registering your

password.

How to register Smart key

When registering or re-registering a smart key, you must register all the smart keys you have at once. Also registered smart keys are door lock only. It may not work when used with other products.

1. Press [registration] button

Open the battery cover and press [registration]button

Beep

3. Contact smart key to smart key input unit

If you touch the smart key to be registered one by one, you will hear a confirmation sound every time you touch it. Registration is completed by clicking the [Registration] button on the indoor side body.

Reference

1. When adding the password, please repeat the above

item 3 before the [License plate lamp] turns off.

2. Up to 30 smart keys can be registered.

Cautions

1. When registering a new smart key, the existing smart

key is automatically deleted.

2. Press [2]button in the number plate of outdoor side

Reference

1. You can register up to 5 interlocks.

2. Repeat step 3 when registering the linker.

How to delete smart key, linker

1. Press [registration] button

Beep

Open the battery cover and press [registration]button

3. Press #button

2. Press number in the number plate

- Smart key deletion: No 7 button

- Deleting the interlock: No 8 button

Press and hold the [#] button for 5 seconds to delete the registered smart key or interlock.

How to set auto lock, manual lock

Make sure to turn off the Mortise Square Lock on the indoor body.

1. Enter password 2. Press [#]button

3. Press [4] or [7]button and press registration button

Touch the outdoor license plate to turn on the LED and enter the registered password.

Auto lock setting: Press the [4] button and press the register button to set the auto lock function after a confirmation tone sounds. Manual lock setting: After pressing the [7] button and pressing the register button, the manual lock function is set after a tone is heard.

Press the [#] button twice in succession

Reference

1. It is a function to strengthen the security of password

and it is a function to set a virtual number instead of the

original number when the password is registered and

authenticated for more than 1 second.

Ex) When 1 is long pressed: It is recognized as a virtual

number other than 1.

2. Combined with the imaginary function of this product,

password security is further strengthened.

3. You can set each number and you can check that the

lamp blinks when you press for more than 1 second.

4. 3D touch mode is turned off at the factory.

Cautions

1. When the 3D touch mode is released, the password is

reset to "1234".

2. In case of master registration / deletion, fire / accident, etc.,

it is recognized as normal number mode.

Open the door in outdoor

Method 1

1. Enter password 2. Press [*]button

Open the door by password

Touch the outdoor license plate to turn on the LED and enter the registered password.

When you press the [*] button, you will hear a confirmation tone and then open when you open the door.

Method 2

on the indoor side body

Open door with smart key

1. Contact smart key to smart key input unit

When the registered [Smart Key] is touched to the smart key input part, a confirmation tone is heard and it opens when you open the door.

Method 3

Open door by interlocking(Optional)

1. Press the [OP/CL] button on the interlock

Press the [OP / CL] button on the interlock to open the door.

Door locking in indoor and outdoor

Set lock Indoor Outdoor

Auto lock

Manual lock

Automatically locked after 2 seconds after Press the [double lock] button

Locked automatically after 2 seconds after door closes Touch the number plate during 2 secods

Deactivation from outdoor unit

1. Input Password 2. Press [#], [9] button

When LED lights on, input password

Press [#] then press [9], indoor dual lock is off with beep sound

Dual authentication / Registration authentication setting

1. Input password 2. Press [#] button twice,

Touch number plate. When LED lights on, input registered password

3. Press [Regist.] button.

Beep

Open the battery cover and press [registration]button

press [1] or [8] button.

[1] : Dual authentication [8] : Registration authentication

Once press [Regist.] button on outdoor body, Dual authentication or registration authentication mode is on or off. Active: Sound - Piriricic Deactive: Sound - Piric

Volume Adjustment

Deadbolt of indoor unit must be come out from mortise before setting

How to

1. Input Password 2. Press [#] button

When LED lights on after touching number plate, input registered password

3. Press [3] or [6] to adjust volume

[3] for volume up [6] for volume down

Reference

1. Available total 8 levels of volume sound

2. If sound pause mode, numbers are only flicking

without sound

Reference

1. When you press [double lock] button in manual lock

mode, you will hear a "beep" buzzer sound when the door

is locked and inform you that the door is lockedv.

Internal double lock setting

It is a function that can not open a door with a password or a smart key outside the door.

Setting

1. While the door is locked, press and hold the [double lock] button for 3 seconds

If you press and hold the [DUAL LOCK] button for 3 seconds, the setting is completed with "OK" sound.

How to release internal

1. Push or pull the knob from inside to open the door

CDL-200P CDL-200R

2. Press the [double lock] button inside and dismiss

Reference

1. If dual authentication mode is activated, Password +

Card should be confirmed to open to door.

(door open by BLE keeps available.)

2. If registration authentication mode is activated,

first authentication by existing password should be done

for the next step.

* No dual authentication / registration authentication is

activated if factory setting.

* To deactivate dual authentication / registration

authentication, repeat the same procedure for activation

If door to be opened by abnormal operation such as door gap break through, burglar alert rings with more than 80db noisy sound.

How to deactivate burglar or temperature alert

Remove batteries or [password + *] , [smartkey touch] if temperature is too high, no deactivation.

Battery Replacement Alert

If battery alert light is on on number plate or beep sounds ring, battery has to be replaced. All batteries must be replaced with new one at once.

Caution

1. Lifetime of battery can be varied according to

manufacturers, date of production, working condition.

(Expected lifetime : 10 months assuming no wireless

operation, AA type alkaline 8ea, 10 times per one day use)

2. If battery liquid leaks out, product can be damaged. Regular checking is recommended – every 6 months.

3. Battery lifetime might be shortened if wireless module

is activated.

Sound Pause Mode

Temporary silence function (1 time) regardless latest volume setting

How to

1. Touch number plate and press [#]

2. Press [*] after password or, contact Card to open the door.

Reference

Sound is back to the original volume if pause mode is

operated once

High Temperture Alarm

Once extremely high temperature is detected (60℃± 10℃), locker is automatically released to open the door with huge sound to secure user’s safety.

Emergency Power

When door can not be opened due to fully discharged battery.

1. Contact the terminals of 9V battery to emergency power outlet

Press [Password] and [ * ] to open the door while contacting terminals of 9V battery to emergency power outlet.

9V emergency battery (sold separately)

Emergency Key

When door is not opened due to malfunction.

Open the bottom cover of outdoor body to use mechanical key box. Key-in to open the door for emergency release.

Caution

1.Your mechanical key is recommended to be stored

outside of the door for emergency use.

Factory Reset Mode

1. Press [Registration] button.

BEEP

Open the battery cover and

press [Registration] button for 5 secs

3. Press [#] button for 2 secs.

Factory default mode is completed with beep sound.

Caution

1.All settings back to the default after factory reset

Anti-mischief alert and 1 minute pause

If unregistered [password], [smartkey] keeps used more than 5 times

continuously, freeze operation for 1 minute with alert sound.

Try 5 times in a row??

Reference

1. To deactivate alert sound, open the door from indoor body

handle

2. If mechanical key is available, deactivate alert sound by key

2. Input “123578951” when number plate lights on

Deadbolt Jam alert

When deadbolt is jammed during door open/close, alert sound of bee bee bee bee” rings 3 times.

Caution

1.If no sound deactivation or door lock malfunction,

product installed position has to be adjusted.

Please contact your local installer or service provider.

Door Open Alert during automatic lock setting

To inform door open status during automatics lock setting, alert sound rings 2 times with each 15 seconds interval if door opened.

Self-Diagnosis Table by each LED number flicking

To see the status of product by means of checking flicking number

ACTION SELF-DIAGNOSIS

Flicking ALL LEDs -Anti-mischief alert and 1 minute pause

Flicking LED number 2 -Error on password, card

Flicking LED number 3

Flicking LED number 4 - Deadbolt Jam

Flicking LED number 5 - Burglar Alert

Flicking LED number 6 - Unregistered password, card

Flicking LED number 7 - Already registered address

Flicking LED number 8 - Fire Alarm

Flicking LED num

Burglar Alert

Flicking LED number 0

- Full of r egistered password, card

ber 9 - Dual lock from Indoor unit

Summary of how to use

Function Default

Password change 1234

Card registration None

Delete all card

Interlocking registration None

Delete the all interlocking

Open the door indoors

Close the door indoors

Open the door outdoors

Close the door outdoors

Auto lock setting

Manual lock setting

Set dual

authenitication mode

Set registration

authenitication mode

3D touch authenitication mode Release

Internal dual lock LED setting Release

Internal force lock setting Press an d hold the [Internal force lock] button for 3 seconds

Release internal force lock

Etiquette mode function Normal mode Password: Press [#] button ⇒ Enter password ⇒ Press [*] button

Buzzer volume setting

se alram sound

Relea

Automatic

[Registration] button ⇒ [1] button ⇒ Password to register⇒ [*] button⇒ [*] button

[Registration] button ⇒ [2] button ⇒ Card (tag) recognition (Continuous registration) ⇒ [Registration] button

[Registration] button ⇒ [7] button ⇒ [#] button More than 5 seconds

[Register] button ⇒ [3] button ⇒ Remote con ⇒ [Registration] button [Registration] button ⇒ [8] button ⇒ [#] button More than 5 seconds

Door lock handle: Push the manual opening / closing device towards the door.

Auto lock: Auto lock when the door is closed Manual Locking: Press the [Internal Dual Locking] button

Password: LED of window number LED ON ⇒ Enter password ⇒ Press [*] button

Card: Card contact with card recognition

Emergency key: Rotate after inserting emergency key into Emergency key insertion part

Auto lock: Auto lock when the door is closed Manual lockin g: Touch the license plate of the window for 2seconods Enter the password ⇒ Press the [#] [#] button ⇒ Press the [4] button ⇒ Press the [

Registration

locking

Enter the password ⇒ Press Press the [ Enter the password ⇒ Press the [#] [#] button ⇒ Press the [1] button

Release

(Individual authen tication / Dual authentication) ⇒ Click the [ Enter the password ⇒ Press the [#] [#] button ⇒ Press the [8] button

Release

(General registration / double registration) ⇒ Click the [ Enter the password ⇒ Press the Press the [ Set sound (beep sound), release sound (beep sound) Enter the password ⇒ Press the [#] [#] button ⇒ Press the [5] button ⇒ Press the [

Indoors: manual opening and closi ng with door open

Outdoors: Enter the password ⇒ Press the [#] button ⇒ Press the [9] button

Treble: Enter password ⇒ Press [#] button ⇒ Press [3] button Bass: Input password ⇒ Press [#] button ⇒ Press [6] button Indoor: When battery is removed Outdoors: Password, card authentication

Registration

] button

the [#] [#] button ⇒ Press the [7] button ⇒

] button

[#] [#] button ⇒ Press the [0] button ⇒

] button

] (On/Off)

trol [OP / CL]

and door closing