Commax CAV-1020IG+ User Manual

User Manual

GATE VIEW PLUS MONITOR (CAV-1020IG+)

• Thank you for purchasing COMMAX products.

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

Contents

Table of contents

1.

1.

Warnings and caution ··········································································

2.

2.

Part name and Function ·······································································

3.

3. Usage instruction ················································································

4. Operation.................................................................................................................................... 5

4. User Setting ·······················································································

5. BRIGHT / COLOR / CONT setting (Available only in monitoring mode ............................6

5. System Setting ···················································································

6. How to use lobby phone ......................................................................................................... 7

7. Installation method ................................................................................................................... 8

6. How to use lobby phone ·······································································

8. Wiring ......................................................................................................................................... 8

7. Installation method ··············································································

9. Part l

8.

Component ························································································

10.

ist ........................................................................................................................................9

Wiring method ····················································································9.

10. Instructions for use ············································································

11. Miscellaneous ···················································································

12. Specication·····················································································

3

5

6

9

10

9

11

14

15

15

16

18

18

18

1. Greetings

󱄿Thank you very much for purchasing of COMMAX products.
󱄿Please read carefully this user manual and follow its rules.
󱄿This intercom can be used in offices, and shopping outlets, and provide

convenience to use communication on long distances.

2

Warnings and caution

1.

Please follow the things described below in order to prevent any
danger or property damage.

Prohibition.

Warning

Caution

It may cause a serious damage or
injury if violated.

It may cause a minor damage or
injury if violated.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord
without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

Warning

Please don’t use several
products at the same time on
one power socket.

·It may cause a fire due to an

abnormal overheating.

Please don’t install the
product in the place where
there is much oil, smoke or
humidity.

·It may cause an electric

shock or fire.

Power & Installation

Please don’t bend the power
cable excessively or it may
cause an electric shock.

·fire when using a damaged

power cable.

Please don’t install the
product with the lightening
and thunder.

·It may cause an electric

shock or fire.

Please don’t
cable with a wet hand.

·It may cause an electric

Please don’t use and connect
this product with other
products with different rated
voltage

·It may cause a disorder or

handle the power

shock.

fire.

Please plug out the power
cable from the socket when
not using it for a long period
of time.

·It may shorten the product

lifespan or cause a fire.

When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.

·It may cause a fire due to

the increased internal
temperature.

3

Warning

Please don’t disassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.

·It may cause an electric

shock or fire.

Cleaning & UsePower & Installation

Please plug the power cable
firmly into the inner end

·It may cause a fire.

Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.

If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.

·It may cause an electric

shock or fire.

Caution

Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).

·It may cause an electric

shock or fire

Please check the use voltage
and current for the DC-only
products and use the
appropriate rectifier.

·It may cause a fire.

lease don’t insert any

P
metallic or burnable materials
into the ventilation hole.

·It may cause an electric

shock or fire.

When connecting the power
cables after cutting the cable,
please install the product with
power off

·It may cause an electric

shock or fire

Please avoid direct rays of the
sun or heating devices at a
time of installation.

·It may cause a fire.

Please use only the designated
batteries for the products of
using DC power.

·It may cause an electric

shock or fire.

When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.

·It may cause an injury from

the falling object.

Please don’t install the
product on an unstable place
or small support board.

·It may cause an injury if it

falls down while in use.

When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)

Cleaning & Use

4

Please don’t drop the product
on the ground and don’t apply
a shock .

·It may cause a failure.

Please use the designated
connection cable within the
maximum calling distance
designated for the product

·It may reduce the product

performance.

Part name and Function

2.

No

1

2

3

4

①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫

Description

LCD monitor

Speaker

Microphone

Power indicator LED

LCD monitor : menu, visitor display
speaker
Microphone
Power indicator LED
Away button: For Away set/clear
Monitoring button: Lobby monitoring

Guard call/ paging elevator button : Guard call/ paging elevator

Door release button : For opening door
MENU button : For Menu start/exit
Talk button : For call start/exit
On/Off Switch
External wiring connection socket: For Lobby, Guard, Alert and Security sensor connection

No No

5

6

7

8

Description

Away button

Monitoring button

Guard call/ paging elevator button

Door release button

Description

9

MENU button

10

Talk button

11

On/Off Switch

External wiring connection

12

socket

※ This product is compatible with Lobby, Guard unit for Gateview System

5

3. Usage instruction

3-1. Call from the individual entrance

When the visitor presses the call button, an electronic chime sound rings and

①

the visitor’s image appears on the monitor.
Conversation with the individual entrance will begin when you presses the call

②

button. To release the door lock, press the door release button.

(Only in case ofusing the screen turned on, open& shut can be used)

③

When you receive the call from Lobby or Guard Station during the conversation

with the individual entrance, the electronic chime sound rings. Then, press the

talk button to end the call with a guard station and press the call button again to

begin the conversation with a visitor .

④

Screen will be turned off after 60 sec automatically, press the monitoring button
to check again.

⑤

When press the talk button after the end of talking with a visitor, screen is turned
off and all is done.

3-2. Call from the Lobby

Visitor’s image will be shown on the monitor with emitting chime sound when a visitor presses the call

①

button
Press the talk button by watching visitor and talk with a visitor.

②

(Screen will beturned off after 60 sec automatically from the beginning of conversation)
When you receive the call from Lobby or Guard Station during the conversation with the individual

③

entrance, the electronic chime sound rings. Then, press the monitoring button from the video phone to

finish the conversation with lobby andhave a conversation with visitor.

④

When you press the door release button in the middle of conversation, the lobby gate will be opened

with switchgear sound and the conversation will be finished.

3-3. Conversation with guard

(1) Call from the guard

The sound of call will be emitted when it has a call from guard.

①

Press the talk button to begin the conversation

②

While talking over the phone with the guard station, lower call sound of monitoring will be emitted.

③

Then, press the monitoring button from the video phone to finish the conversation with lobby and have

a conversation with visitor

(2)Calling the guard station

Press the “Talk” button and “Guard call” button in sequence.

①

Conversation will begin when a guard station responds

②

3-4. Monitoring

When you receive initial call , your device automatically searches for the door camera and displays OSD

accordingly

6

Display with Door camera Display with no Door camera

By pressing monitor button, display above appears. If you press button of your desired

space (monitoring[ ], guard[ ] ), you can monitor according space.
(Door, Lobby,)

- Monitoring (DOOR/LOBBY)function time is 30secs

- You can talk by pressing call button while monitoring(DOOR/LOBBY)

- You can monitor only certain lobby with pre-set ID

3-5. 

① If the elevator pager(CCU-310EV) is connected with monitor, you can use this function.

When you press the guard button while in standby or talking status, The menu is displayed as shown in

②

the picture. (However, the 'GUARD' menu is not displayed when talking with the lobby or guard )

③ For paging elevator, press the ELV(corresponding button) while the menu is displayed.
④ When you page the elevator, “Elevator CALL” message will be displayed at the top of screen.
⑤

If you don’t page the elevator, press the EXIT(Talk button).

7

3-. Away and security function

Away and security function enabled by connecting to Security 1(magnetic sensor) and Security 2(PIR

sensor)

(1) How to set Away set

When you press the 'away' button in standby mode, the "beep" sound occurs and the whole front

①

LEDs blink and Away mode is set
In the away mode, after away set time finishes, the household unit detects security sensor and

②

changes into security mode. The entire front LED stops blinking and remains turned on
After setting away mode, you should go out within set time.

③

( AWAY set time: It is initially set for 60 sec and you can change it from 0 to 90 sec by pressing
setting button.)
After away mode is set, if device detects something abnormal ( external incursion ), the entire front

④

LEDs Immediately flash and the security ring tone will be generated at the household unit and
guard unit

(2) How to turn off the away set

After return, by pressing ‘away button’ once, the entire front LED stops blinking and away mode is turned off
with ‘beep’ sound. The device delivers the away mode off message to guard station. It must be turned off
within the away mode off time.
(When released from factory, away mode off time is initially set for 0sec. You can change it from 0 to 90 sec
by pressing setting button.)

※ Notice: If you don`t turn the away mode off, the device will consider you as an intruder and

alert tone will ring

(3) How to turn off the security bell

When the security bell rings, after checking whether it is real or not, by pressing ‘away’ button once,
you can turn off away mode and can return to initial state with LED blinking and alert tone stopped.
(When the security bell rings , the release / return is only possible when the sensor is in the normal
state, that is, in case of crime security 1, in the state where the contact of the magnetic sensor is
made, in case of crime security 2, only when the motion detecting sensor does not detect any
movement or intruder.)

3-. Bypass call function [used with away mode]

When householde sets away mode, visitor at lobby or door camera is automatically connected to

●

guard station.

(In this case, volume of the call can be lower as it is bypassing another route.)

3-. ALARM1( fire ) function

(1) When alert1 sensor detects fire, alarm tone rings

(Fire engine sound) at guard station and monitor

(2) After checking alert situation is terminated, press away

button twice.
(One time: release/ two times: return), after return, front
LED blinking and security 2 alert tone stops.)

8

3-. ALARM2(Gas) function

(1) When sensor 2 detects gas release, security2

(Hospital alert tone)alert tone occurs at monitor and guard
station device

(2) After checking alert situation is terminated, press away

button twice.
(One time: release/ two times: return), after return, front

LED blinking and security 2 alert tone stops

3-. Approximate alert function

In emergency situation, alert tone is generated and this is delivered to guard station

①

The message notification is delivered until household turns off the security mode

②

After notification, devices changes in to stand-by mode

③

-

Stand-by mode: pre-mode for ring tone alert. When you receive calls from exterior, device sends
alert tone rings to external devices. (lobby, etc.)



This product can be interlocked with Digital Door Lock via RF module and please refer to connection
diagram.

4. User Setting

After Menu screen appears, you can change setting with below 4 buttons

Menu start and finish :[ ] (Menu button -‘[ ] ’)

SELECT : [ ] (Guard button-‘[ ] ’)

Move upward /move right : [ ] (Door release button –‘▲’ / ‘▶’)

Move downward /move left : [ ] ( Monitor button–‘▼’ / ‘◀’)

After pressing MENU button in Video call or monitoring mode, you can change settings for

DOOR(LOBBY), VIDEO SET(BRIGHTNESS / CONTRAST/ COLOR), UTILITY (ADDITIONAL

FUNCTION) and INFORMATION (product information)

4-1.Display setting

DOOR(LOBBY) VIDEO SET (BRIGHTNESS / CONTRAST/ COLOR control function).

After moving to menu with MENU button, press SELECT button to move to the menu below.

(you can control LOBBY VIDEO SET while you are talking with lobby.)

(1) BRIGHTNESS : control BRIGHTNESS

(2) CONTRAST : control CONTRAST

(3) COLOR : control COLOR

You can control from 0 to 20 level. Initial level is set for level 10

9

※

how to set

After moving to menu with your desired MENU from ‘DOOR VIDEO SET’, press SELECT

button to move to the menu below

(you can control ‘LOBBY VIDEO SET’ while you are talking with lobby.)

(4) RESET: reset display setting

※ how to set

After moving to RESET from DOOR VIDEO SET, press SELECT button for RESET.

Select YES with move button.

Complete your setting by pressing SELECT button

※ Notice :Display control and reset function adjusts each video(DOOR/LOBBY) collectively

(5) EXIT: Return to EXIT of initial menu

4-2. UTILITY (additional function)

After moving to MENU with MENU button, press SELECT button to move to below screen

(1) SPEAKER VOLUME: control call volume

There are 3 levels of volume control options and default is level 2

※ how to set

After moving to SPEAKER VOLUME from UTILITY, press SELECT button for SPEAKER VOLUME.

Select your desired setting.

Complete your setting by pressing SELECT button

(2) CHIME-BELL VOLUME : control ringing tone

You can control from 0(MUTE) to 3 level. Initial level is set for level 2.

10

※ how to set

After moving to CHIME-BELL VOLUME from UTILITY, press SELECT button for CHIME-BELL VOLUME.

Select your desired setting.

Complete your setting by pressing SELECT button.

(3)EXIT: Return to EXIT of initial menu

4-3. INFORMATION (product information.)

After entering to menu by pressing menu button, you can move to INFORMATION and check product
information

(1) MODEL : Shows product name
(2) VERSION : Shows program version
(3) HOME ID : Shows current building No. / Household No
(4) TOUCH : Shows touch program version
(5) VIDEO : Shows current camera output standard. (NTSC / PAL)
(6) SOURCE : This indicates location of current video (Household door unit & Lobby entrance)

4-4. EXIT

Exit from menu

5. System Setting

You can set HOME SET(Household information setting) and AWAY SET(Go Out setting), SENSOR SET(Use

of Security 2), INFORMATION(Product information check) after pressing menu button for 3 seconds in stand

by mode

5-1. HOME SET (Household information entry)

Move to HOME SET from System setting mode and select below

(1) HOME ID : Setting Building No. and Household No
※ How to set

Move to HOME ID from HOME SET and select

①

After selecting the number with ▶ / ◀, press the SELECT button and fill it in from

②

first. : Default on household no is 8 digit numbers. Blanks are marked with 0.
(ex : Building no : 101 Household no : 1 (0101 - 0001)
※ Wrong number can be modified with ◁ button.

When finish inputting 8-digit number, press the select button to save it.

③

(2) PASSWORD :Setting Household Password

※ How to set

①

Move to PASSWORD section from HOME SET and select below
Enter numerical numbers by using moving button (Initial building/household No. are set “1234”.

②

You should change password to use)

※ Warning : For security reason, do not use repeated No

※ Numbers such as 0000, 1234, 4321 are prohibited to use for security reason

(3) LOBBY ID : Set Lobby entrance ID to monitor

※ How to set

Move to LOBBY ID section from HOME SET and select below

①

Enter numerical numbers out of 01~39 by using moving button

②

(Initial Lobby entrance ID No. is set “01”)

Complete setting by pressing “select” button

③

EXIT : Go back to system setting

11

5-2. AWAY SET (GO OUT MODE SETTING)

Move to AWAY SET from system setting and select below

(1) AWAY WAIT-SET :

SET the stand by time till sensor detection of household. It’s setting for time of leaving the house after
setting AWAY MODE. (Initial stand by time : 60seconds)

※ How to set

Move to AWAY WAIT-SET from AWAY SET

①
②

Enter numerical numbers(time) by using moving button

※ Attention :

On AWAY SET, if sensor detects that customer doesn’t leave the house in designated time, alarm

rings. So, customer must leave before setting time

(2) AWAY WAIT-CLEAR :

Set the stand by time till alarm rings after sensor detection. It’s setting for time till canceling AWAY

mode after customer enter the house. (Initial stand by time : 0 seconds)

※ How to Set

Move to AWAY WAIT-SET CLEAR from AWAY SET

①
②

Enter numerical numbers(time) by using moving button

※ Attention :

After coming back home, customer must clear AWAY mode in designated time. Unless

clearing in time, alarm rings

12

(3) EXIT: Go back to system setting

5-3. SENSOR SET (Security 2. use setting)

Move to SENSOR SET from system setting mode and select below

BURGLAR2 : Setting Security 2. And initial setting is “ON”

- ON : Use Security 2.function

- OFF : Do Not Use Security 2.function
※ How to Set

Move to BURGLAR2 from SENSOR SET and select below.

①

Select use(ON/OFF) by using moving button

②

Complete the setting by pressing select button

③

5-4. INFORMATION (Product Information)

In MENU mode, move to INFORMATION and check out Product Information

(1) MODEL : Product Name
(2) VERSION : Product Version
(3) HOME ID : Currently set Building No. & Household No.
(4) TOUCH : Touch program Version

5-5. EXIT

Exit from Menu

13

6. How to use lobby phone

1) When paging the household
Enter the household number you want to cal.1

●

ex) household 101

Household number appears on FND

●

Press the Call button (E)

●

Conversation begins when they answer.

●

1, 0, 1

⇒

2) When paging guard station
Press the guard button

●

‘gUAd’appears on FND

●

Press the Call button (E)

●

Emit call house along with flickering of ‘gUAd’.

●

Conversation begins when guard station answers.

●

3) Opening the door with RF card

Press the Household number

●

Press the Key button (K)

●

Letters of ‘PASS’ flicker on the FND.

●

Press the 4-digit password.

●

Appears ‘----’ on the FND.

●

Press the Call button

●

Door is open with flickering of ‘oPEn’ on FND .

●

[Reference for use]

Contact guard station or management station if you
don’t remember the password

4) Opening the door with registered RF card (optional function)

●

Put the RF card on the sensor positioned right below of
camera lens to open the door. Door will be opened along
with a message of ‘oPEn’ on FND.

Please the Card Here

[Reference for use]

1. If you try to open the door with unregistered RF
card, it will be notified to guard station. Please
try again after registering it at the guard station
or management office.

2. If RF card still doesn’t work after proper
registering procedure, it is not usable card.

Enter theHousehold Number.
ex) unit 101

Press the

Call button (E).

Wait for a reply

Press the Guard button.

Wait for a reply

Enter the Household Number.
ex) To open the door of unit 101

Enter the Household PIN.

Press the Call button (E).

Press the Call button (E).

Press the page button.
A paging tone will sound.

Press the Page button.
A paging tone will sound.

Press the Electronic key button.

Press the Page button.

OPEN DOOR

14

7. Installation method

1. Installation Method of camera monitor

스크류 M3(1EA)

스크류 T4(4EA)

CAV-1020IG+

8. Component

Note

주의사항

① Avoid the range of direct sunlight

① 직사광선이 비치는 곳은 피하십시오.

② Recommended height is pertinent

② 설치높이는 145~150Cm 정도가

from 1450 ~ 1500mm

적당합니다.

③ Avoid the installation near magnetic

③ 가스, 자력, 습기 등이 많은 곳은 설치를

피하십시오.

activity, humid temperatures and gas

CAV-1020IG+

(T)4 X 18mm

Screws for

mounting

Wall mount bracket

(M)3 X6mm

Screws for main body

User manual

2P( EA)/3P(2EA)/

4P(1EA)/ 10P(1EA)

Connector

15

9. Wiring method

16

Cautions for wiring

※

If it is to be installed near high voltage line, please use coaxial cable for grounding

1)

Keep the cable out of the sheath exposure to prevent to be shorted

2)

Be sure to turn off the monitor before you connect the monitor with cameras.

3)

Be careful of the polarity of the cable when you connect the monitor with cameras

4)

Security 1.(Magnetic Sensor)

5)

It should be connected with lead switch. If you don't want to use this function, connect 2 wires
each other or security sensor 1 & away mode will be deactivated.

Security 2. (PIR Sensor)

6)

Operating voltage is DC 12V. Be sure to check the wire polarity before connecting wires.
In case of using security 2. sensor, use after 3 minutes from turning on the product for sensor stabilization.

Lobby Entrance

7)

In case of connecting between lobby panel & monitor, please connect them VD/IN(DN),
VD/OUT(UP) in order. Wire for transferring video signal between lobby & monitor

8)

Alarm sensor1 (Fire)

Be sure to check the wire polarity before connecting the wires

Alarm sensor2 (Gas)

9)

Operating voltage is DC 12V. Be sure to check the wire polarity before connecting the wires

What’s VD/IN, VD/OUT ?

●

VD/OUT line from household No.101 to be connected to VD/IN of household No. 201 as described in
the drawing

●

Household Extension Line

Be careful while wiring since this has polarity. Video cable should be connected VD/IN, VD/OUT

17

10. Instructions for use

1.

Turn on the power switch.

2.

Please contact your local agent for product maintenance when you have a problem in use of CAV-1020IG+

3.

For your safety, power switch with a safety device must be used in your building

4.

Unplug before installing or repairing the product

5.

Unplug when you connect monitor with door cameras

11. Miscellaneous

●Please carefully read this User's Guide before calling service man

After checking the entire check list, please contact customer service center. We will do our best to
make you satisfy with our services

12. Specifications

Spec

Transmission style

Rated Voltage

Model

100-240V~, 50/60Hz

Power consumption

Display

10.1 " TFT LED display

Conversation

Calling sound

Talk duration

Distance

Working Temperature

Dimension

0 ~+40℃ (32℉ ~ 104℉)

318(W) X 215(H) X 35(D) mm

CAV-1020IG+

CAMERA :4 lines, LOBBY : 8 lines, Security1: 2lines, Security2 : 3lines,

Alarm sensor1 : 2lines, Alarm sensor2 : 3lines

MAX : 15W, Stand-by : 3.5W

HANDS FREE mode(Voice Switch circuit)

Entrance : Electronic chime, Guard station : Melody

Standby : 30sec Conversation : 60sec, Guard station : 3min

Individual camera : 30m (Ø 0.5 - Line Impedance:3ohm)

Common lobby : 300m (UTP), Guard station : 1Km

18

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

Fineview Video Phone CDV-70N

User Manual

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : [phone]~550 Fax. : [phone]
Web site : www.commax.com

Printed In Korea / 2016.10.104