Comark N8006 User Manual

Comark N8006
Thermometer

Humidity and temperature meter with integral temperature and
humidity sensor for quick and convenient checks.
Capacitive humidity sensor provides fast response for quicker
readings.

The instrument is suitable for applications as diverse as heating
and ventilating, the storage of sensitive materials such as paper
and fabric, or art galleries and museums where acceptable
humidity levels need to be maintained.

• Data hold of current, maximum and minimum readings

• IP67 rated dust and waterproof

• Large data display for simultaneous reading of either relative

humidity or calculated dewpoint temperature and ambient temperature

• Dewpoint calculation from measured temperature and humidity
values, essential for controlled environments

• Selectable auto switch off to save battery life

• 0 to 100% humidity range

• -20°C to 60°C temperature range

• Capacitive humidity sensor for fast response

• Thermistor temperature sensor for accurate readings

• Temperature display selectable in °C, °F

• Accuracy at 0-90% RH: ±2%

• Two year warranty

UKAS certicates of calibration available, if required, from

the Comark accredited temperature and humidity laboratory
for use in quality systems.

Comark is the leading manufacturer and supplier of a wide range of electronic
measurement instruments for temperature, humidity, pressure and pH.

2-Year

Warranty

Temperature Measurement

Sensors
Humidity
Temperature

Measurement Range
Humidity
Temperature

Scales RH, °C, °F, DP

Displayed Resolution
Humidity
Temperature

Accuracy Humidity
0 to 90% RH
90 to 100% RH
Accuracy Temperature

General

Operating Temperature Range -20°C to +60°C, -4°F to +140°F

Response Time 2 minutes in moving air

Battery Type 2 x 1.5V AA IEC LR6 Alkaline

Battery Life 250 hours

Weight 270g/9.5oz

Dimensions
Length
Width
Depth

Environmental Protection IP67, BS 5490, IEC 529

HC 1000 capacitive sensor
10K thermistor sensor

0 to 100% RH

-20°C to +60°C, -4°F to +140°F

0.1% RH

0.1°

±2% RH
±3% RH
±0.5°C/±0.9°F

183mm/7.2 inches
68/79mm/2.68/3.11 inches
31mm/1.22 inches

Technical

Specication

WARRANTY

All Comark instruments have a minimum one year warranty unless otherwise
stated. The warranty period for temperature probes is for six months and all other
probes and electrodes are unwarranted because the conditions of use are beyond
our control. The Comark warranty covers manufacturing defects and component
failures on all products returned to Comark premises and applies worldwide. The
warranty does not affect your statutory rights. In line with our policy of continuous

development we reserve the right to alter any product specications without

notice. All products are covered by our Quality Management System which is
compliant with BS EN ISO 9001:2008 for the design, manufacture, supply, service,
repair and recalibration of electronic measuring instruments and equipment.

BIOCOTE

Selected Comark thermometers, probes and data loggers have BioCote’s silver
techology incorporated into instrument cases and probe handles at the time of

manufacture. The antimicrobial nish inhibits the growth of bacteria, reducing

the risk of cross-contamination and infection in the environment and is becoming
accepted within HACCP and due diligence procedures as an important extra level
of defence.

®

Distributed by:

C222/1/EN © Comark Instruments

Comark Instruments

Bury Mead Road, Hitchin,
Hertfordshire SG5 1RT, UK

Tel: 0844 ([phone]
Fax: 0844 ([phone]
Email: [e-mail] – UK and Ireland
[e-mail] – International

Comark Instruments (USA)
PO Box 500
Beaverton, OR 97077, USA

Tel: [phone]
Fax: [phone]
Email: [e-mail] - USA

Click on www.comarkltd.com or www.comarkusa.com for more information