Comark KM814FS User Manual

Comark
KM814FS
Thermometer

The Comark Infra red thermometers measure surface
temperatures and can be used throughout the food
industry, anywhere that non-contact measurement is
required.

Infra red temperature measurement prevents wastage of the
measured material, and enables checks on areas where

access is difcult.

The KM814FS is pocket sized and offers fast, convenient and
safe measurements. It has a range and accuracy ideally suited
to food industry HACCP requirements.

• Laser sighting to pinpoint target area

• Pocket sized and easy to use

• Fast safe surface temperature measurement

• Backlit LCD display

• Displays temperature in °C or °F

• Emissivity pre-set at 0.97, optimised for food use

• Hold function freezes displayed reading

• Protective pouch available, ref: 17275

• Ratio of Distance to spot size 4:1

Comark is the leading manufacturer and supplier of a wide range of electronic
measurement instruments for temperature, humidity and pressure.

2-Year

Warranty

Temperature Measurement

Measurement Range -30°C to +200°C, -25°F to +400°F

Scales °C and °F

Instrument Accuracy at +23°C
for targets
below 0°C
0°C to + 65°C
above + 65°C

Accuracy at +73°F for targets
below +32°F
+32°F to +150°F
above +150°F

Repeatability ±0.5% of reading or ±1°C/2°F, whichever is

General

Display Hold 7 seconds

Operating Tempreture Range 0°C to +50°C, +32°F to +122°F

Ratio of Distance to Spot Size 4.1

Emissivity Pre-set at 0.97

Battery Type 9V IEC 6LF22 alkaline

Weight 227g

Dimensions L 101mm x W 38mm x H 152mm

±1°C +0.1%
±1°C
±1.5% of reading

±2°F +0.1%
±2°F
±1.5% of reading

greater

Technical

Specication

WARRANTY

All Comark instruments have a minimum one year warranty unless otherwise
stated. The warranty period for temperature probes is for six months and all other
probes and electrodes are unwarranted because the conditions of use are beyond
our control. The Comark warranty covers manufacturing defects and component
failures on all products returned to Comark premises and applies worldwide. The
warranty does not affect your statutory rights. In line with our policy of continuous

development we reserve the right to alter any product specications without

notice.All products are covered by our Quality Management System which is
compliant with BS EN ISO 9001:2008 for the design, manufacture, supply, service,
repair and recalibration of electronic measuring instruments and equipment.

Distributed by:

C214/2/EN © Comark Instruments

Comark Instruments

52 Hurricane Way
Norwich, Norfolk NR6 6JB, United Kingdom

Tel: [phone]
Fax: [phone]

Email: [e-mail]

Comark Instruments (USA)
PO Box 500
Beaverton, OR 97077, USA

Tel: [phone]
Fax: [phone]
Email: [e-mail]

Click on www.comarkinstruments.com or www.comarkusa.com for more information