Comark Diligence WiFi Quick Start Manual
The data logger will arrive partly charged but ideally you should charge it for 24 hours before use for
optimum performance. The data logger will automatically start recharging while connected to a PC or
USB charger using the USB cable provided.
The battery icon has three states:
Getting Started
The data logger may already be displaying a reading but it will not be confi gured or connected to your
WiFi network until you complete the product set-up.
To set up the unit use our free Diligence WiFi PC software available to download from the ‘Software’
section in Information at www.comarkinstruments.com.
For the USA, free Diligence WiFi PC software is available to download from the ‘Software’ section in
Quick Links at www.comarkusa.com.
Installing software
Repairing or Modifying
Never attempt to repair or modify Diligence WiFi
products. Dismantling Diligence WiFi products, including
the removal of external screws, may cause damage
that is not covered under the warranty. Servicing should
only be provided by an authorised supplier.
Charging
Only use a USB Power Adaptor or a USB port on another
device to charge Diligence WiFi products. Read all
safety instructions for any third party products and
accessories before use with this product. Comark
Instruments is not responsible for the operation of any
third party accessories or their compliance with safety
and regulatory standards. We do not recommend
charging the battery when the unit is at 40˚C (104˚F) or
above. Some of our products employ safety features to
prevent this.
Using Connectors and Ports
Never force a connector into a port; check for obstruction
in the port, make sure that the connector matches
the port and that you have positioned the connector
correctly in relation to the port. If the connector and
port do not join with reasonable ease they probably do
not match and should not be used.
Disposal and Recycling Information
You must dispose of Diligence WiFi products according
to relevant laws and regulations. Diligence Wifi products
contain electronic components and lithium polymer
batteries and therefore they must be disposed of
separately from household waste.
Important Safety Information
WARNING: Failure to follow these safety instructions could
result in fi re, electrical shock, other injury or damage.
Not Displayed
Battery OK
1
Solid
Battery Charging
3
Flashing
Battery Low - Recharge!
2
1
Diligence WiFi
Quick Start Guide
Diligence QSG-v4.indd 1Diligence QSG-v4.indd 1 03/07/2013 17:04:4203/07/2013 17:04:42
Note: These screens will vary depending on which data logger model purchased.
Connect the Diligence WiFi Data logger to the PC’s USB port with the USB cable provided.
Double click on the Diligence WiFi icon on your Windows™ desktop. This will load the wizard
confi guration software. Follow the on-screen instructions to set up your data logger.
Use the button on the home screen to get more help on setting up your data loggers
Data loggers can be confi gured via WiFi without the need of reconnecting the USB cable.
Part No. 20294 Issue 1
Copyright © Comark Instruments - 2013
When placing the data logger consider local heat sources and radio obstructions. Any physical
obstructions between router and data logger will affect the signal range. WiFi extenders can be used if
required to increase range where signal strength is limited in the area to be monitored.
The signal icon has three states:
Data Logger Set-up
Hints and Tips
Changing Data logger Settings via WiFi
Data logger Placement
2
2
3
Click on the ‘Set-Up
Data logger’ button
1
Name your dta logger, select
temperature scale, sample
rate and transmission Rate
3
Click on your network
and enter your password
if required
2
Set high and low alarms
4
Position your data logger
where you wish to take
readings
6
Data logger set-up is
now complete
5
The data logger is
not communicating
with the Diligence
WiFi software
Flashing
2
The data logger has
not yet been set-up
and confi gured to
a WiFi network
Not Displayed
1
The data logger is successfully
communicating with the
Diligence WiFi software
Solid
3
Diligence QSG-v4.indd 2Diligence QSG-v4.indd 2 03/07/2013 17:04:5103/07/2013 17:04:51
Loading...