Coline WK-2218-UK, WK-2218 Owner's Manual

Kettle
Vattenkokare • Vannkoker • Vedenkeitin
MAX
1.5
L
1.2
L
0.85
L
0.5
MIN
Art. No Model. No
18-4299 WK-2218-UK 34-5017 WK-2218
English 3 Svenska 6 Norsk 9 Suomi 12
Ver. 201106
2
Kettle
Art.no18-4299 Model WK-2218-UK  34-5017 WK-2218
Please read the entire instruction manual before use and save it for future reference. We reserve the right for any errors in text or images and for making any necessary technical changes to this document. If you should have any questions concerning technical problems please contact our Customer Services.
Safety
• Place the kettle in a secure place and out of children’s reach to reduce the risk of scalding from boiling water.
• The kettle should only be used as described in the manual.
• Never fill the kettle with any other liquid than water.
• Always unplug the product from the wall socket before cleaning it or when it is not to be used for a long time.
• Make sure that the lead does not come into contact with hot surfaces, e.g. a warm hob.
• The exterior of the kettle should not be exposed to water or other liquids. If the exterior of the kettle is wet, pull out the plug and dry the kettle using a cloth.
• Do not touch the kettle or the lead if your hands are wet.
• Do not subject the base of the kettle to moisture, knocks or high temperatures.
• Check that the mains current is 220–240 V and that the kettle is connected to an earthed socket.
• Never use another base than the one included.
• Do not pull or carry the kettle by the mains lead. Do not use the lead as a handle and do not let it get caught in a door. Do not pull the lead around sharp corners and edges.
• Do not use the kettle if the lead or plug is damaged. The mains lead should be checked regularly. If the mains lead is damaged it must only be replaced by the retailer or qualified service technician.
• Never use the kettle if you have dropped it on the floor, left it outdoors or dropped it in water.
• This product is only intended to be used and stored indoors.
• Do not open the casing. Certain components inside the casing are exposed and carry dangerous electrical current. Contact with these could result in electric shock.
• The kettle should only be repaired by qualified service personnel.
• The kettle should not be taken apart or modified.
• This product must not be used by anyone (including children) suffering from physical or mental impairment. This product should not be used by anyone without sufficient experience or knowledge if they have not been instructed in its use by someone who will take responsibility for their safety.
• Never let children play with the product.
• Keep in mind that the kettle will become hot during use. To avoid burning yourself, only hold the kettle by the handle.
Note: The spout filter must be inserted in order for the automatic shut-off to work.
ENGLISH
3
ENGLISH
Productdescription
1 2
MAX
1.5
L
1.2
L
0.85
L
L
0.5
MIN
3
4
5
6
Beforeinitialuse
Boil clean cold water in the kettle two times in order to rinse it out.
1. Spout with filter
2. Lid
3. Lid release button
4. Water level gauge
5. On/off switch 0 , 1
6. Base
Use
1. Place the base (6) on a stable and level surface.
2. Switch the kettle off by setting the on/off switch (5) to 0.
3. Fill the kettle with cold water only. Do not overfill the kettle. The water level should be between the min and max marks.
4. Make sure that the spout filter is in place before using the kettle.
5. Close the lid.
6. Place the kettle on its base.
7. Connect the plug to an earthed power point (220–240 V AC) which is protected by at least a 10 A fuse.
8. Turn the on/off switch to 1. The indicator light (4) will come on.
9. The kettle shuts off automatically when the water has finished boiling. The power indicator light will go out.
10. Pull out the plug, or use a time switch between the plug and the power point.
Do not open the lid when pouring out the water.
4
Careandmaintenance
• Always unplug the appliance from the wall socket before cleaning.
• Never submerge the kettle in water.
• Clean by wiping with a soft cloth moistened with water and possibly a little washing-up liquid.
• Avoid using solvents and abrasive cleaning agents. Dry carefully after cleaning.
• Clean the filter located in the spout of the kettle regularly. The filter can be lifted up when the lid is open. Rinse the filter in warm running water and let it dry. Slide the filter back into the grooves in the spout.
Descaling
Because of the natural occurrence of calcium in water, limescale deposits may form in the kettle after some use. Limescale deposits might lengthen the time needed for water to boil.
For descaling, use a mixture of water and white vinegar (acetic acid) or a special descaling agent that can be purchased at most supermarkets.
1. Mix 1 dl of white vinegar (not regular vinegar) with 3 dl cold water or follow the directions included with the descaling agent.
2. Pour the mixture into the kettle and turn it on. Let the mixture boil twice. Thereafter, pour the mixture away.
3. In order to remove the last remnants of limescale and descaling agent, the kettle should be filled to the max mark with fresh cold water. Turn the kettle on and let it boil.
4. Pour out the water and repeat this process 3 times. The kettle is now ready to use again.
The kettle should be descaled after 2-3 months daily use or whenever it has visible limescale deposits.
ENGLISH
Disposal
Follow local ordinances when disposing of this product. If you are unsure of how to dispose of this product, please contact your local authority.
Specifications
Mains supply 220 –240 V AC, 50 Hz Power 2000 W Capacity 1.5 litres
5
Loading...
+ 11 hidden pages