Coline JL2007E-UK, JL2007E User Manual

Flat Iron

Plattång • Glattetang • Suoristusrauta

Art. No: Model. No:

18-4034 JL2007E-UK
34-7239 JL2007E

English 3
Svenska 6
Norsk 9
Suomi 12

Ver. 200807

Flat Iron

Art.no: 18-4034 Model: JL2007E-UK
Art.no: 34-7239 Model: JL2007E

Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse.)

Safety

• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• Please read the entire manual and save it for future use.

• Warning!Donotopenthecasing.Certaincomponentswithintheproduct’scasing
containdangerouscurrents.Contactwiththesemaygiveyouanelectricshock.

• The product should only be repaired by qualied service personnel.

• Disconnect the mains lead after use.

• Never leave the at iron unsupervised when plugged into electrical socket.

• Never use the product while bathing, showering or in any other way in which it can fall
down into water or other uid.

• Donottouchatironwithouthavingpulledoutplugifinspiteofeverythinghas
fallenintowater.

• Do not touch the product with moist hands.

• Never allow children to use at iron without supervision of an adult.

• Never use the product if the plug, mains lead or other parts are damaged.

• Do not use lead to carry the product.

• Protect the lead from hot or sharp objects.

• The at iron is for indoor use only.

• Do not use the product in environments with aerosol sprays, oxygen or other
concentrated chemicals.

• Extra protection can be obtained by installing an earth fault breaker with rated current
of 30 mA.

ENGLISH

3

Product Description

ENGLISH

Flat iron with ceramic plates, 9 different temperature settings, becomes hot within several
seconds, safety grip handle, 210 cm swivel cord – no tangle. 230 VAC/90 W.

Use

1. Plug the at iron into an electrical outlet (with dry hands).

2. Press and hold the (ON/OFF) switch until the display lights up to turn on heat. The display
shows temperatures (100 °C to 200 °C), heat can be regulated by pushing (+) repeatedly
to raise the temperature in 9 steps. The actual temperature of the at iron is shown on the
display. Push (–) repeatedly to lower temperature.

3. Adjust to desired temperature. Remember that thicker hair requires higher temperature
and thinner hair uses lower temperature.

4. Hold at iron or lay it on a heat tolerant surface until it is completely warm and ready
for use.

5. Do not use the at iron until hair is completely dry and well-combed.

6. Divide hair in sections and use hair clip to hold it separate. Thick or long hair may need to
be attened several times.

7. Start at the top of the head and continue downward. Make sure that the ceramic plates are
in motion the entire time and that they don’t remain still in one place. Repeat until all hair is
attened.

8. To turn off at iron push and hold in (ON/OFF) switch until display shuts off, unplug the cord
when you are nished. The display shows ”OFF” when at iron is turned off with switch.

9. Let the at iron cool completely before it is put away for storage.

Note!

• The at iron may smoke a little or release a burning smell for a short while the rst time it
is used. It is completely normal and will stop after 1 to 2 minutes.

• We recommend that you use a heat protecting hair care product on your hair before you
begin using the at iron.

Warning!

• The at iron’s ceramic plates become very hot, therefore use the iron carefully and with
caution.

• Do not use the at iron if you have sensitive hair or have a damaged scalp, if you are
heat-sensitive or if you have wet hair.

• The at iron is connected to the electrical current even if it is shut off. Remember to pull
out the plug after you have nished using it.

• Do not use the at iron on articial hair, wigs etc. The hair can melt.

4

Care for Iron

• Store the at iron in the carton when it is not in use. Do not roll up the cord around the at
iron. Instead fold it softly when stored.

• Let the at iron cool completely before putting it into box.

• Pull out the plug and let the at iron cool before cleaning.

• Clean the ceramic plates when you have used oils or other hair care products in hair.
Dry the at iron with a cloth, lightly moistened with water. Make sure that the at iron is
completely dry before you begin to use it or before you put it back in the box.

• Never use strong detergents or solvents.

• Never drop the at iron into uid.

• The at iron should only be repaired by qualied service personnel.

Disposal

Follow local ordinances when disposing of this product. If you are unsure about how
to dispose of this product contact your municipality.

Specifications

Temperature Range: 9 different settings (100 °C to 200 °C)

Voltage: 230 V AC, 50 Hz

Power: 90 W

Class: II

ENGLISH

This product meets the demands for 89/336/EEG (electromagnetic compatibility)
and 73/23/EEG (low voltage with addition 93/68/EEG·/CE marked).

5