Cobra Electronics AN - 8630 - 25 User Manual

AN-8630-25
TELEPHONE
ANSWERING
SYSTEM
USER’S GUIDE
COBRA ELECTRONICS
CORPORATION
Chicago, Il. 60707
PRINTED IN CHINA ©1997 COBRA ELECTRONICS CORPORATION 480-000-P-001
Cobra
®
The antenna is in the phone,
not in your way...and the
sound is incredible.
24 HOURS A DAY,
7 DAYS A WEEK...
WE’RE HERE FOR YOU!
Your new Cobra Intenna® Cordless Phone Answering System is the world‘s first and
only cordless system with no antenna to bend, break or interfere with your life.
That, along with the fact that it‘s all digital (no tapes to replace) and designed with
an electronic mailbox (similar to the ones found in many offices), makes this one of
the most sophisticated yet easy-to-use cordless telephone answering systems on the
market today. There’s even VOICE HELP built in to give you assistance when using the
functions. To get started, turn to page 9 and follow the steps, 1-2-3, and your system
is soon ready to go. When you’re ready to add more functions, simply refer back to
the information guide for the feature you want and we’ll help you through it, step by
step. Still can’t get it to work?
Give us a call. Cobra wants to be your partner in clear communication.
CALL YOUR COBRA CONSULTANT
AT
1-773-889-3087
Introduction 2 Information Guide 3 Important Safety Instructions 4 & 5 Features Information 6 & 7 Things To Know 8
Getting Started 9
Plugging In Setting The Clock Recording Your Outgoing Message
Wall Mounting 10
On A Plate Directly On The Wall
Using Your Phone 11
To Answer A Call From The Base To Place A Call At The Base To Answer Or Place A Call Away
From The Base
Memory Dialing 12 & 13
To Store A Number In Memory Creating A Directory To Store A Number Over 16 Digits To Dial A Number Stored In Memory To Replace Or Change A Number
Stored In Memory
Intercom/Paging System 13, 14 & 15
To Use The Intercom To Use The Pager As A Handset Locator To Use Intercom As 2-Way Monitor To Use 2-Way Recording Feature
Digital Answering System (from the base) 16 & 17
Getting Ready To Record Your Outgoing Message To Access Your Incoming Messages To Erase Your Messages To Screen A Call
When The Memory Is Full To Record A Memo To Access A Memo
Digital Answering System (from the handset) 18
To Access Your
Incoming Messages
To Screen A Call
Digital Answering System (from a remote location) 19
Getting Ready To Access Your
Incoming Messages
To Record Your
Outgoing Message To Record A Memo To Turn Your System On When The Memory Is Full
Using The Mailbox Feature 20 & 21
Programming Your Mailbox To Record Individual Mailbox
Outgoing Messages To Access General Messages To Access Individual Messages To Record OGM From Remote Location To Access Messages From Remote
Location To Record OGM From Handset To Access Messages From Handset To Erase Individual Messages
Additional Features 22 & 23 Rechargeable Battery Information 24 & 25 Troubleshooting Checklist 26 & 27 Service Information/FCC Guidelines 28 Limited Warranty 29 Reminder Card (Duplicate) 30 Accessories Order Form 31
1-800-COBRA22
NEED HELP?
AN8630-25
INFORMATION GUIDE
Cobra
®
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not locate base unit near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
5. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the bottom or back are provided f or ventilation, to protect it from overheating; these openings must not be bloc ked or covered. The openings should never be blocked by placing the product in the bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.
7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power compan y.
8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.
9. Do not overload outlets and extension cords as this can result in the risk of fire or electric shock.
10. Never push objects of any kind into this product through cabinet slots as they may touc h dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Nev er spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product, but take it to qualified servicemen when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.
12. Avoid using telephone (other than a cordless type)
1-773-889-3087
NEED HELP?
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Power Supply Specifications
This symbol signifies that only the Cobra AC Adapter supplied with this cordless telephone (Part No. 768-023-N-001) should be used
Input: AC 120V, 60Hz, 15W Output: DC 12V, 500mA
!
THE LIGHTNING FLASH AND ARROW HEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF “DANGEROUS VOLTAGE” INSIDE THE PRODUCT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT.
SEE WARNING ON BOTTOM/BACK OF PRODUCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE
CAUTION
during an electrical storm. There may be a remote risk of electric shock from lightning.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord or plug is damaged
or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions because improper adjustment of
other controls may result in damage and will
often require extensiv e work by a qualified
technician to restore the product to normal
operation. E. If the product has been dropped or the cabinet
has been damaged. F. If the product exhibits a distinct change in
performance.
The cordless handset operates on batteries. There is also a battery supplied for the base unit memory.
CAUTION:To reduce the risk of fire or personal injury,
read and follow these instructions:
A. Use only the following types and sizes of
batteries:
A1. For Handset Unit: Cordless Telephone (Ni-Cd
rechargeable) Battery Pack 3.6V, 270 mAh (Cobra Model 213-013-9-001).
A2. For Base Unit: 9Volt (Alkaline non-
rechargeable) Battery.
B. Do not dispose of battery pack in a fire. The cells
may explode. Chec k with local codes for possible
disposal instruction. C. Since released electrolyte is corrosive and may
cause damage to eyes or skin and may be to xic if
swallowed:
C1. Do not open or mutilate battery pack.
C2. Always replace the entire battery pack rather
than reusing one or more cells.
C3. Do not expose batteries to heat or flame.
D. Exercise care in handling the battery pack in
order not to “short” the battery contacts with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
E. Follow the handset battery charging instructions
outlined in this manual.
F. For Base Unit Battery:
F1. Do not attempt to recharge the 9V battery
provided with or identified for use with this product. The battery may leak corrosive electrolyte or explode.
F2. Do not attempt to rejuv enate the battery
provided with or identified for use with this product by heating it. Sudden release of the battery electrolyte may occur, causing burns or irritation to eyes and skin.
F3. Remove the 9V battery from this product if
the product will not be used for a long period of time (several months or more), since the battery could leak inside the product during this time.
F4. Discard “dead” batteries as soon as
possible, since “dead” batteries are more likely to leak in a product.
F5. Do not store this product or the battery
provided with or identified for use with this product in high temperature areas. Batteries which are stored in a freezer or refrigerator for the purpose of extending shelf lif e should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold strorage.
AN8630-25
Cobra
®
?
You can REPLACE THE
BATTERIES
in the
handset yourself. It’s
fast and easy.
SEE
PAGE 25
for simple-to-
follow instructions.
Your new Cobra Intenna
Cordless Telephone
Answering System has a
true
TWO-WAY
INTERCOM
built in. You
can page remotely, page
from the base or the
handset and use the
intercom as a baby
monitor—You can even
turn The Answering
System off and on from a
remote location. For
more information,
SEE PAGE 13.
This deluxe answering system has a complete
REMOTE VOICE HELP
MENU
to guide you
through all of the
possible operations,
Including Message
Retrieval, from a touch-
tone phone anywhere in
the world. For details
on how it can work for
you,
SEE PAGE 19.
Your new Cobra Intenna
Cordless Telephone
Answering System has
5 DIGITAL
MAILBOXES
.
One is for general
messages, and the other
four may be used for
individually accessed
messages. Use one for
mom, two for the kids, one
for business or all for
business.
The choice is yours!
SEE PAGE 20for
information.
You can select from
any one of the
25 CHANNELS
AVAILABLE
any time you wish by
pressing a button. If the
channel you’re using
gets too much noise or
static, pick a cleaner
one, without
disconnecting your call.
SEE PAGE 22
for more details.
You can use any features
that you want of this
advanced
Answering system from
the Cordless Handset.
The
VOICE HELP
SYSTEM
gives you all of the information you’ll need.
SEE PAGE 19for
directions.
Your new Cobra Intenna
Cordless Telephone
Answering System comes
with
MEMORY DIALING.
Program 10 of your most
frequently called numbers into the digital memory system. Retrieve
any of them with just the
touch of a button. To find
out how,
SEE PAGE 12.
1-773-889-3087
NEED HELP?
?
DID YOU KNOW THAT...
AN8630-25
Cobra
®
Set The Clock
Press and hold the button that says ”Clock” and VOICEHELP will direct you to press the “SKIP” button until you hear the correct day of the week, then release. Press and release ”Clock” again, then SKIP or REPEAT button until the correct hour is displayed in the LED window. Repeat again for the minutes. Press ”Clock” again and V OICEHELP will verify the time that has been set. Every message received will then be identified by day of the week and time.
Record your outgoing message
Check to be sure the ICM (Incoming Message) Recording switch on the side of the phone is set at “2 Min.” (as opposed to “Annc Only”). Press and hold the button that say s “ OGM” (Outgoing Message) and VOICE HELP will direct you to start recording your message after the beep. The LED display window will indicate the length in seconds; you have up to 60 seconds recording time for your OGM. Speak about 6 inches from the microphone located in small slot on front of base. Release the button and your message plays bac k. Not satisfied with your message? Simply follow these steps over again and keep recording y our outgoing message until you’re comfortable.
Cobra
®
Now that your new Cobra Intenna Cordless Phone Answering Sy stem is out of the box and ready to use, here are some things you’ll need to be aware of bef ore getting started.
Location
Be sure the location you‘ve chosen is near both an electrical outlet and a telephone wall jack—both are required to connect your new Cobra Telephone Answering System. Maximum range is obtained by locating the base as high as possible in your home.
Charging
After connecting, and before using the handset of your new system, it will need to rest in the base overnight (at least 12 hours) in order to charge.
Ringer
Make sure the RINGER switch, located on the rear of the base, is set to ON.
Pulse/Tone
Set the PULSE/T ONE switch, located on the rear of the base, to the operation that is correct for your installation.
Keep This Guide
Put this guide in a handy place. You may want to refer to it f or information when using or programming diff erent features of your Cobra Intenna Cordless Telephone Answering System.
Battery Back Up
Now‘s the time to put your 9v back-up battery (included) into the base. Simply open the battery compartment located below the handset on the base, plug-in the battery, and your outgoing and incoming messages will be saved during power outages or other disconnections.
1-773-889-3087
NEED HELP?
SOME THINGS YOU NEED TO KNOW BEFORE YOU GET STARTED
GETTING SET UP... IT’S AS EASY AS 1-2-3
1
1
2
2
4
3
4
6
5
9
6
5
9
7
RINGER
3
BATTERY BACK UP
CLOCK
BUTTON
SKIP
BUTTON
ICM
RECORDING
SWITCH
7
REPEAT BUTTON
OGM
BUTTON
10
10
8
8
LED DISPLAY
PULSE/
TONE
▼ ▼
Plug it in
Plug the adapter cord into the power jack on the rear of the base, then plug the adapter into any standard 110V outlet. (VOICE HELP willdirect you to set clock and outgoing message). Set the handset
on the base to charg e and in 12 hours you’re ready to make and receive calls.
The Answering S ystem will work while the telephone handset is charging.
REPEAT SKIP
AN8630-25
Cobra
®
Loading...
+ 11 hidden pages