COATS Kit 85609110 User Manual

Balancer Adapter Wall

Storage Board Extension

Kit 85609110

Balancing Solutions

Before You Begin

The Wall Storage Board Kit consists of the following parts:

Item Part No. Qty. Description

Ⓐ 85609108 1 Storage Board Extension Ⓑ 8113094 3 Hook Ⓒ 8107091 3 Grip

Ⓓ 8106303 6 3/8-16 UNC Locknut

Verify that you have received all of the parts listed.

Assembly and Installation

1. Install the Grips onto the Hooks if not already installed.

(Fig. 1)

2. Install each Hook onto the Storage Board using two 3/8-16 UNC Locknuts as shown in figure 1. Hand-tighten the Locknuts (very snug), leaving the threaded portion of the Hook flush with the Locknut. Make sure the Hooks are pointing upward toward the label.

Existing Storage Board

3. Mount the assembled Storage Board Extension to the existing board as shown (Fig. 2).

Existing Storage Board

Mounting Hole

Storage Board Extension

Ⓐ

Ⓒ

Ⓑ

Ⓓ

Figure 1 - Hook Assembly Diagram

Mounting Hole

Figure 2 - Assembled Wall Storage Board