COATS Fixed Finger Plates User Manual
Instructions
1. Using a hole gauge, position the hole gauge
probes firmly into consecutive wheel lug holes and
tighten the lock screw.
2. Remove the hole gauge and read the scale that
matches up with the number of lug holes as the wheel.
The measuring surface of the hole gauge lines up with
the scale mark that indicates the bolt circle pattern. Find
the fixed finger plate with the indicated bolt circle pattern (see page 2)
3. Select the cone that best fits the center hole in the
wheel. Slide the back cone spring and the cone onto
the balancer shaft.
4. Lift the wheel onto the shaft and center it on the cone.
5. Next, align the fixed finger plate’s fingers with the
wheel lug holes.
6. Install the hub nut onto the shaft. Tighten securely.
Follow wheel balancer manufacturer’s recommended
procedure for balancing tires.
Fixed Finger Plates
Mounting Wheels Using Fixed Finger Plates
8113016 06 03/11 1 of 2
Number of
Lug Holes
Bolt Circle
Pattern
Scale Marks
Measuring
Surface
Scales
8113016 06 03/11 2 of 2 © COPYRIGHT 2003 ALL RIGHTS RESERVED PRINTED IN U.S.A.
Parts List
Item No. Description
1 Fixed Finger, Tapered
Fixed Finger, Ball Seat
2 Lockwasher, 3/8" Internal Tooth
3 BHCS, 3/8-16 x 1.25
4 Allen Wrench, 7/32"
4
3
1
Allen
Wrench
Button Head
Cap Screw
Fixed Finger
2
Lockwasher
Bore I.D. 40 mm
Bore I.D. 1 1/8 inch
Bolt Circle Pattern
**
***
**
* It is recommended that the fixed fingers be installed in the primary pattern.
** These kits are supplied with the Ball Seat Fingers.
*** Also available in 2-inch bore I.D. (FFP# 15c)
Fixed Finger Plates
Mounting Wheels Using Fixed Finger Plates
*Primary
4 x 100 MM
4 x 114.3 MM (4.50)
5 x 100 MM
5 x 114.3 MM (4.50)
5 x 120.65 MM (4.75)
5 x 112 MM
5 x 120 MM
6 x 4.5 inch
5 x 5.5 inch
5 x 135 MM
8 x 6.5 inch
8 x 170 MM
5 x 150 MM
6 x 115 MM
8 x 180 MM
Secondary
4 x 108 MM (4.25)
4 x 108 MM (4.25)
5 x 108 MM (4.25)
5 x 108 MM (4.25)
5 x 115 MM
5 x 130 MM
5 x 127 MM (5.00)
6 x 5.5 inch
5 x 6.5 inch
5 x 4.25 inch
6 x 127 MM
6 x 135 MM
5 x 110 MM
6 x 132 MM
8 x 200 MM
Plate No.
FFP# 1a
FFP# 2a
FFP# 3a
FFP# 4a
FFP# 5a
FFP# 6a
FFP# 7a
FFP# 8a
FFP# 9a
FFP# 10a
FFP# 11a
FFP# 12a
FFP# 13a
FFP# 14a
FFP# 15a
Plate No.
FFP# 1b
FFP# 2b
FFP# 3b
FFP# 4b
FFP# 5b
FFP# 6b
FFP# 7b
FFP# 8b
FFP# 9b
FFP# 10b
FFP# 11b
FFP# 12b
FFP# 13b
FFP# 14b
FFP# 15b
Loading...