105513
DINING ARM CHAIR WITH PU CUSHION SEAT
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 3
REVISION 0 : 01 / 16 / 2015
ITEM :
PARTS IDENTIFICATION
BC1 PC
CUSHION SEAT WITH FRAME
D
RIGHT ARM
1 PC
PAGE 2 OF 3
105513
ASSEMBLY INSTRUCTIONS
A
E LEFT ARM 1 PC
CHAIR BACK
FRONT LEG
1 PC
2 PCS
HARDWARE IDENTIFICATION
1 LONG BOLT 4 PCS
2 MEDIUM BOLT
4 PCS
4
5
6 ALLEN WRENCH 1 PC
NOTE :PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS.
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
SHORT BOLT
LOCK WASHER
FLAT WASHER
NOTE: QUANTITIES SHOWN ARE FOR ONE CHAIR
3 PCS3
11 PCS
11 PCS
2 PCS7 SCREW
www.coastercompany.com
ITEM :
PAGE 3 OF 3
STEP 1 STEP 2
1.1 ) Align and fasten cushion seat with frame ( B ) to chair back ( A ) leg
using long bolt ( 1 ), lock washer ( 4 ) and flat washer ( 5 ). using medium bolt ( 2 ) lock washer ( 4 ) and flat washe
DO NOT FULLY TIGHTEN AT THIS STEP.
1.2 ) Align and fasten cushion seat with frame ( B ) to chair back ( A )
bottom rail using short bolt ( 3 ), lock washer ( 4 ) and flat washer ( 5 ).
THEN FULLY TIGHTEN ALL THE BOLTS
AT STEP 1.1 & 1.2 WITH ALLEN WRENCH ( 6 ).
105513
ASSEMBLY INSTRUCTIONS
Align and fasten front leg ( C ) to cushion seat with frame ( B )
and fully tighten with Allen wrench ( 6 ).
1.1
r ( 5 )
1.2
STEP 3 STEP 4
3.1 ) Align and fasten right arm ( D ) and left arm ( E ) to
cushion seat with frame ( B ) using short bolt (3 ), lock washer ( 4 )
and flat washer ( 5 ) and fully tighten with Allen wrench ( 6 ).
3.2 ) Align and fasten right arm ( D ) and left arm ( E ) to
chair back ( A ) leg using screw ( 7 ) and fully
tighten with Phillips head screw driver (NOT INCLUDED).
COMPLETED
D
E
www.coastercompany.com
Loading...