Page 1
105183
DINING ARM CHAIR
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 4
REVISION 0: 12/14/2017
REVISION 1: 09/14/2018
Page 2
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
15 MINUTES
PARTS IDENTIFICATION
AV
BV
CV
DV
EV
PART NAME
FIGURE
BACK FRAME
SEAT CUSHION WITH FRAME
FRONT LEG
LEFT ARM REST
RIGHT ARM REST
NOTE: QUANTITIES SHOWN ARE FOR ONE CHAIR.
QTY
1PC
1PC
2PCS
1PC
1PC
PAGE 2 OF 4
www.coastercompany.com
Page 3
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
HARDWARE NAME
LONG BOLT
1
(5/16" x 76mm - RBW)
MEDIUM BOLT
2
(5/16" x 64mm - RBW)
SHORT BOLT
3
(5/16" x 38mm - RBW)
LOCK WASHER
4
(8mm - RBW)
FLAT WASHER
5
(8 x 19 x 2mm - RBW)
FIGURE
QTY
4PCS
4PCS
6PCS
14PCS
14PCS
SCREW
6
7
(#8 x 38mm - RBW)
ALLEN WRENCH
(4 x 30 x 80mm - RBW)
2PCS
1PC
NOTE: QUANTITIES SHOWN ARE FOR ONE CHAIR.
NOTE: PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
www.coastercompany.com
PAGE 3 OF 4
Page 4
STEP 1
STEP 2
STEP 3
STEP 4
COMPLETE
PAGE 4 OF 4
www.coastercompany.com
Loading...