PAGE 1 OF 5
103062
DINING CHAIR WITH CUSHION SEAT
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
REVISION 0 : 12/12/2013
REVISION 1 : 08/19/2014
ITEM :
PAGE 2 OF 5
ASSEMBLY TIPS :
1. Remove hardware from plastic and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
103062
Warning !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishment.
ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION:
A
B
C
D
E
BACK REST
UPPER LEG FRAME
LOWER LEG FRAME
WOOD CLEAT
CUSHION SEAT
HARDWARE IDENTIFICATION:
1PC
1PC
1PC
1PC
1PC
1
2
3
4 1PCS
5 4PCS
6
7
NOTE: QUANTITIES SHOWN ARE FOR ONE CHAIR
ALLEN WRENCH
LONG BOLT
SHORT WOOD BOLT
LONG WOOD BOLT
SHORT BOLT
LOCK WASHER
WOOD PLUG
1PC
4PCS
4PCS
4PCS
4PCS
www.coastercompany.com
PAGE 3 OF 5
ITEM :
STEP 1
Align and fasten upper leg frame (B) to lower leg frame (C) by using long wood bolt (4) and tighten with Allen wrench (1).
103062
ASSEMBLY INSTRUCTIONS
1
C
B
4
STEP 2
Align and fasten cushion seat (E) to leg frame using long bolt (2) and tighten with Allen wrench (1).
1
2
E
www.coastercompany.com
PAGE 4 OF 5
ITEM :
STEP 3
Align and fasten wood cleat (D) to leg frame ( as per diagram shown) by using short bolt (5) and lock washer (6) and tighten
with Allen wrench (1).
103062
D
ASSEMBLY INSTRUCTIONS
6
D
5
1
STEP 4
Align and fasten back rest (A) to leg frame (as per diagram shown) by using short wood bolt (3) and tighten with Allen
wrench (1).
A
3
www.coastercompany.com
PAGE 5 OF 5
ITEM :
STEP 5
Insert wood plug (7) to the open hole on leg frame as per diagram shown.
103062
7
ASSEMBLY INSTRUCTIONS
STEP 6
Complete.
www.coastercompany.com
Loading...