102723
BENCH WITH CUSHION SEAT
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 2
REVISION 0 : 06/26/2011
REVISION 1 : 09/13/2011
ITEM : ASSEMBLY INSTRUCTIONS
A
1PC
B
LEG
4PCS
1
WRENCH
1PC
2
HEX BOLT
8PCS
3
LOCK WASHER
8PCS
4
FLAT WASHER
8PCS
STEP 1
HARDWARE IDENTIFICATION
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easyassembly.
102723
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishment
PARTS IDENTIFICATION
SEAT FRAME WITH CUSHION SEAT
Place seat frame with cushion seat upside down on soft surface, then align and fasten all legs to seat frame using bolt, lock
washer and flat washer and tighten with wrench.
www.coastercompany.com
PAGE 2 OF 2
Loading...