Page 1
100621
MISSION DINING TABLE
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 2
REVISION 0 : 12/10/2005
REVISION 1 : 02/15/2012
Page 2
ITEM :
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
!
100621
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishment
ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION HARDWARE IDENTIFICATION
A 1
B 2
STEP 1 STEP 2
Place table top upside down on soft surface. Align and Flip table over using two people to lift and flip this table.
fasten all legs to table top using hex bolt, lock washer
and flat washer and tighten with wrench.
TABLE TOP 1PC
TABLE LEG 4PCS
3
4
WRENCH 1PC
HEX BOLT
LOCK WASHER
FLAT WASHER 8PCS
8PCS
8PCS
PAGE 2 OF 2
www.coastercompany.com
Loading...