CMA Dishmachines EST-44 User Manual
Hot Water Assurance System
For Conveyor-Style Dishwashers
OPTIONAL CMA E-TEMP
TM
FEATURES:
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A. © 7-2014 CMA, Inc.
E-TEMP
TM
n
208V / 240V, 480V, single and three
phase configurations
n
Single element (40-degree) vs. dual
element option (70-degree)
n
Tank plug for single element option
n
Separate 208V/ 240V 3-phase power
connection required (electrical
connection point provided inside
conveyor control panel)
n
Pre-plumbed, wired, and secured to
the dishmachine
n
Non-pressurized system for safe
operation
n
40-degree rise
9kW @ 208V, 25 amps
12kW @ 240V, 29 amps
12kW @ 480V, 15 amps
n
70-degree rise
15kW @ 208V, 42 amps
20kW @ 240V, 48 amps
18kW @ 480V, 22 amps
n
Field convertible from 40-degree rise
to 70-degree rise
OPTIONAL
VENT
HOODS
PATENT PENDING
MODEL EST-44 WITH E-TEMPTMBOOSTER HEATER
ALSO AVAILABLE ON MODEL EST-66
DISHMACHINES
CMA
®
Registered Trademark
MIZER
U
L
R
LISTED
COMMERCIAL
DISHWASHER
864T
USC
BARB
CONNECTOR
HEATER ROCKER
SWITCH
1
ELECTRICAL
INLET
"
*INLET
OUTLET
FRONT
HEATER ROCKER SWITCH
8
1
2 / "
8
1
2 / "
CMA Dishmachines 12700 Knott Street, Garden Grove CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
Printed in the U.S.A. © 7- 2014 CMA, Inc.
CHANGES FOR 1-PHASE
(TIE STRAPS CHANGED AS SHOWN)
ON HEATE R
T2
TOP
T1
L-
2
L
-
2
L-
1
L
-
1
* CAUTION: WATER SOLENOID MUST BE
PLUMBED AHEAD OF HEATER INLET. HEATER IS
NOT A PRESSURE VESSEL.
*ONLY FOR 40° RISE
H
ot Water Assurance System
For Conveyor Style Dishwashers
OPTIONAL CMA E-TEMP
5/16" MOUNTING HOLES (4)
24.5"
14"
BARB CONNECTORS
LEFT SIDE
HEATER ROCKER SWITCH
5
4"
BARB CONNECTORS
*INLET
OUTLET
WARNING: Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health,
Plumbing and Safety codes.
L-3
L-2
L-1
T-3
3
2
8
T-2
T
-1
THERMOSTAT
H I G H L I M I T
SWITCH
ROCKER
SWITCH
RED
R
ED
BLUE
RED
240V Power Supply: Hook Up Wire With Highest
Voltage On L-2.
GROUND
TOP
3 PHASE SCHEMATIC FOR 40° RISE
L
1
L
3
L
2
L-3
L-2
L-1
T-3
3
2
8
T
-2
T
-1
THERMOSTAT
H I G H L I M I T
SWITCH
ROCKER
SWITCH
RED
RED
B
LUE
RED
240V Power Supply: Hook Up Wire With Highest
Voltage On L-2.
GROUND
TOP
3 PHASE SCHEMATIC FOR 70° RISE
L
1
L
3
L
2
L
-
1
L
-
3
L
-
2
L-3
L-2
L
-1
T-3
3
2
8
T-2
T-1
THERMOSTAT
H I G H L I M I T
SWITCH
ROCKER
SWITCH
RED
R
ED
BLUE
RED
480V Power Supply: Hook Up Wire With Highest
Voltage On L-2.
GROUND
MODEL CMA E-TEMP USA METRIC
AVAILABLE HOT WATER 119 GPH (450 LPH)
HEATER TANK CAPACITY 3.9 GAL 40
9kW @ 208V, 12kW @ 240V, 40°F RISE BOOSTER HEATER (ONE HEATING ELEMENT)
OR 12kW @ 480V 40° RISE
MIN. INCOMING WATER 140°F(60°C)
TEMP. RISE 40°F (22°C)
ELECTRICAL RATING VOLTS PHASE AMPS
208 1 43
240 1 50
208 3 25
240 3 29
480 3 15
Specifications:
15kW @ 208V, 20kW @ 240V, 70°F RISE BOOSTER HEATER (TWO HEATING ELEMENTS)
OR 18kW @ 480V 70° RISE
MIN. INCOMING WATER TEMP. 110°F (43° C)
TEMP RISE 70° F (39° C)
ELECTRICAL RATING* VOLTS PHASE AMPS
208 3 42
240 3 48
480 3 22
*THE TWO ELEMENTS, 70°F RISE WILL BE AVAILABLE IN 3 PHASE ONLY.
DISHMACHINES
Loading...