Cloneralliance Hdml-cloner Wand User Manual

SAFETY PRECATIONS

Before using HDML-Cloner Wand, please ensure that you read and understand the safety

precautions below:

1. Do not attempt to open the case of HDML-Cloner Wand or modify it in any way, as this will

void the warranty.

2. Keep HDML-Cloner Wand away from water and other liquids, as this may cause the unit to

malfunction.

3. HDML-Cloner Wand may become warm during use. This does not indicate malfunction.

4. Do not place heavy objects on HDML-Cloner Wand, as this may cause the unit to overheat

and malfunction.

5. If the exterior of HDML-Cloner Wand requires cleaning, wipe it with a soft dry cloth.

6. Do not dispose of the unit via conventional domestic waste.

II

HDML-Cloner Wand User Manual

Box Contents
How to use HDML-Cloner Wand under Windows OS

Obtain HDML-Cloner Wand Helper
Install
Register
Record/Capture
Troubleshooting

How to use HDML-Cloner Wand under Android OS

Obtain HDML-Cloner Wand Helper Mobile
Install
Register
Record/Capture
Troubleshooting

Supported Resolutions
Product Specifications
Contact Us

1
2

2
2
7
8

14

16

16
17
18
20
24

24
25
26

III

HDML-Cloner Wand User Manual

BOX CONTENTS

(d)

(e)

1

(b)

(c)

(a)

HDML-Cloner Wand User Manual

How to use HDML-Cloner Wand under Windows OS

1. Obtain HDML-Cloner Wand Helper

There are two methods to obtain HDML-Cloner Wand Helper. One is to install it from the
installation CD, while the other is to download from
http://www.cloner-alliance.com/download.html

Note: Before installation, please make sure you are using Windows Vista or
later versions and your PC is equipped with USB 2.0 or 3.0 port.

2. Install

(1) Install HDML-Cloner Wand Helper

1. Put the installation CD into the PC drive and the setup window will pop up as below:

2

HDML-Cloner Wand User Manual

2. Click "Install Driver & Application Software" and follow the instructions of installation
wizard. Click Next – Next – Next – Install – Install – Restart the computer.

3

HDML-Cloner Wand User Manual

Note: During the software installation, a driver needs to be installed as well.
When there is a prompt popped up as below, please click "Install".

4

HDML-Cloner Wand User Manual

(2) Connect HDML-Cloner Wand device

1. Plug the USB cable on HDML-Cloner Wand into the USB port of PC.

2. Plug the mini connector end to the HDMI port of HDML-Cloner Wand.

3. Connect an HDMI cable between the HDMI to mini-HDMI connector and HDMI input
device.

Note: Please connect devices strictly in the order of 1-2-3, otherwise the
problem "USB Device Not Recognized" may occur.

5

HDML-Cloner Wand User Manual

1

2 3

After installing HDML-Cloner Wand Helper and HDML-Cloner Wand device has been
connected to the USB port of PC, the system will prompt "Found a new hardware" and install
the driver automatically. Please make sure "ClonerAlliance HCW-998W Device" appears in the
Device Manager (Right click on My Computer – Manage – System Tools – Device Manager). If
"ClonerAlliance HCW-998W Device" is not in the list, please reinstall HDML-Cloner Wand
Helper and try again.

6

HDML-Cloner Wand User Manual